《BS-EN-15532-2008.pdf》由会员分享，可在线阅读，更多相关《BS-EN-15532-2008.pdf（50页珍藏版）》请在三一文库上搜索。
1、BS EN 15532:2008 ICS 01.040.43; 43.150 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Cycles Terminology Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI This British Standard was published under
2、 the authority of the Standards Policy and Strategy Committee on 31 December 2008 BSI 2008 ISBN 978 0 580 56666 0 Amendments/corrigenda issued since publication DateComments BS EN 15532:2008 National foreword This British Standard is the UK implementation of EN 15532:2008. The UK participation in it
3、s preparation was entrusted to Technical Committee GME/25, Cycles. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applica
4、tion. Compliance with a British Standard cannot confer immunity from legal obligations. Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15532 November 2008 ICS 01.04
5、0.43; 43.150 English Version Cycles - Terminology Cycles - TerminologieFahrrder - Terminologie This European Standard was approved by CEN on 12 October 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the
6、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Germa
7、n). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Re
8、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN
9、DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15532:2008: E Licensed Copy: London South Bank University, South Bank Univer
10、sity, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 2 Contents Page Foreword3 1 Scope 4 2 Terms and symbols.4 Table 1 Ensemble cadre fourche / Frame fork assembly / Rahmen und Gabel / Gruppo telaio- forcella 5 Table 2 - Ensemble de direction / Head assembly / Steuer
11、satz und Lenkung / Gruppo sterzo10 Table 3 Ensemble boiter de pdalier / Bottom bracket assembly / Tretlager und Antriebskomponenten / Gruppo movimento centrale .15 Table 4 Roue / Wheel / Laufrad / Ruota19 Table 5 Moyeu avant / Front Hub / Vorderradnabe / Mozzo anteriore 22 Table 6 Moyeu arrire / Rea
12、r hub / Hinterradnabe / Mozzo posteriore.25 Table 7 Derailleur / Derailleur / Kettenschaltung / Cambio e deragliatore.27 Table 8 Freins / Brakes / Bremsen / Freni.32 Table 9 Selle et pedales / Saddle and pedals / Sattel und Pedale / Sella e pedali.37 Table 10 Autres accessoires / Other accessories /
13、 Anderes Zubehr / Altri accessori .40 Table 11 Symboles / Symbols / Formelzeichen / Simboli 44 Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 3 Foreword This document (EN 15532:2008) has been prepare
14、d by Technical Committee CEN/TC 333 “Cycles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdra
15、wn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document is one of a series dealing with cycles. Eu
16、ropean Standards in this series are: EN 14764, City and trekking bicycles Safety requirements and test methods EN 14765, Bicycles for young children - Safety requirements and test methods EN 14766, Mountain-bicycles - Safety requirements and test methods EN 14781, Racing bicycles - Safety requiremen
17、ts and test methods EN 14872, Bicycles - Accessories for bicycles - Luggage carriers EN 15496, Cycles - Requirements and test methods for cycle locks prEN 15194, Cycles - Electrically power assisted cycles - EPAC bicycle According to the CEN/CENELEC Internal Regulations, the national standards organ
18、izations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro
19、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 4 1 Scope This European Standard defines a description of common terms and
20、 symbols used in the field of bicycles. The terms are classified under a nomenclature of different parts of bicycles and presented in English, French, German, Dutch and Italian. 2 Terms and symbols 1) Frame-fork assembly 2) Head assembly 3) Bottom bracket and chains assembly 4) Wheel 5) Front hub 6)
21、 Rear hub 7) Derailleur 8) Brakes 9) Saddle and pedals 10) Other accessories 11) Symbols Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 5 Table 1 Ensemble cadre fourche / Frame fork assembly / Rahmen
22、 und Gabel / Gruppo telaio-forcella / Frame voorvork samenscholing Number FRANAIS ENGLISH DEUTSCH ITALIANO DUTCH 1.1 Cadre homme Mans frame, diamond frame Herren-Rahmen Telaio uomo Heren frame, diamantframe 1.2 Cadre mixte Mixed Frame Mixed-Rahmen Telaio misto Unisex frame 1.3 Cadre dame Ladys frame
23、 Damen-Rahmen Telaio donna Damesframe 1.4 Cadre monotube Monotube frame Einrohr-Rahmen Telaio monotrave Enkele buisframe 1.5 Cadre monotube pliant Folding monotube frame Falt-Rahmen Telaio monotrave pieghevole Vouwbare enkele buisframe 1.6 Tube suprieur Top tube Oberrohr Tubo superiore Bovenbuis 1.7
24、 Tube de direction Head tube Steuerkopfrohr Tubo sterzo Buitenbalhoofdbuis 1.8 Tube diagonal Down tube Unterrohr Tubo inclinato Onderbuis 1.9 Tube de selle Seat tube Sitzrohr Tubo reggisella Zadelbuis 1.10 Bases Chain stays Hinterbau-Unterrohr Tubi orizzontali posteriori Liggende Achtervork 1.11 Hau
25、bans Seat stays Hinterbau-Oberstrebe Tubi inclinati posteriori Staande Achtervork 1.12 Raccord suprieur de direction Top head lug Steuerkopfmuffe oben Congiunzione superiore sterzo Bovenbuis/ balhoofd lug 1.13 Raccord infrieur de direction Bottom head lug Steuerkopfmuffe unten Congiunzione inferiore
26、 sterzo Onderbuis/ balhoofd lug 1.14 Raccord de selle Seat lug Sitzkopfmuffe Congiunzione reggisella Zadel lug 1.15 Raccord intermdiaire Loop lug Centermuffe Congiunzione intermedia tubo reggisella Center lug Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncon
27、trolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 6 1.16 Entretoise suprieure Seat stay bridge Steg (oben) Traversino superiore Bovenmannetje 1.17 Bote de pdalier Bottom bracket shell, crank hanger Tretlagergehuse Congiunzione movimento centrale Trapas huis 1.18 Entretoise infrieure Chain sta
28、y bridge Steg (unten) Traversino inferiore Ondermannetje 1.19 Support de pompe Pump pegs Luftpumpenhalter Supporti reggipompa Pomphouder 1.20 Tube davant-corps Main frame tube Hauptrahmenrohr Tubo monotrave Hoofdframe buis 1.21 Ensemble fourche Front fork Gabel Forcella completa Voorvork 1.22 Tube p
29、ivot Fork stem Gabelschaft Cannotto forcella Binnenbalhoofdbuis 1.23 Tte de fourche Fork crown Gabelkopf Testa forcella Voorvork kroon 1.24 Fourreau de fourche Fork blade Gabelscheide Fodero forcella Voorvorkschede 1.25 Patte de fourche Front fork end Gabelausfallende Puntalino forcella Voorvorkpatt
30、e 1.26 Patte arrire de cadre Rear fork end Hinterbau-Ausfallende Forcellino posteriore telaio Achtervorkpatte 1.27 Guide gaine Cable guide Bremszugfhrung Passaguaina Kabelgeleider 1.28 Bute de gaine Cable stop Bremszuganschlag Fermaguaina Kabelnok 1.29 Support de gnratrice Dynamo bracket Lichtmaschi
31、nenhalter Supporto dinamo Dynamo beugel 1.30 Entretoise de longeron Lateral stay bridge Steg Ponticello centrale mixte Centrale verbindings lug 1.31 Cadre suspendu Suspension frame Gefederter Rahmen Telaio molleggiato Geveerd frame 1.31 a) Cadre suspendu Main front frame suspension Gefederter Rahmen
32、 Telaio principale anteriore Geveerd frame 1.31 b) Bras de suoension arrire Rear frame swing arm Hinterradschwinge Forcellone oscillante posteriore Achterbrug 1.32 Cadre tandem Tandem frame Tandem-Rahmen Telaio per tandem Tandem frame 1.33 Fourche monobloc (type Unicrown fork Unicrown-Gabel Forcella
33、 completa Unicrown voorvork Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 7 unicrown) 1.34 Fourche pivot non filet (a head set) Non-threated fork stem Gabelschaft fur A-Headset Vorbau Forcella con c
34、annotto non filettato Ahead set 1.35 Fourche suspension simple t Suspension fork Federgabel Forcella molleggiata Geveerde voorvork 1.36 Fourche suspension double t Triple clamp fork Doppelbrckengabel Forcella a doppia sospensione Dubbel kroon geveerde voorvork 1.37 T suprieur Top yoke Oberes Steuerk
35、opflager Gioco superiore Bovenste balhoofdlager 1.38 T infrieur Bottom yoke Unteres Steuerkopflager Gioco inferiore Onderste balhoofdlager 1.39 Fourreau de fourche suspension Suspension fork lower leg Standrohr Fodero forcella a sospensione Buitenste voorvorkpoot 1.40 Tube plongeur Suspension fork s
36、tanchion leg Tauchrohr Gambo fodero-forcella molleggiata Binnenste voorvorkpoot 1.41 Soufflet Gaiter Faltenbalg Soffietto Vorkhoes 1.42 Arceau Brake arch Stabilisator (brake booster) Archetto freno Voorvork brug 1.43 Ensemble ressort/amortisseur Spring/damper unit Feder-/Dmpfungs Einheit Gruppo moll
37、a/ammortizzatore Veer demper eenheid Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 8 Figure 1a Ensemble cadre fourche / Frame fork assembly / Rahmen und Gabel / Gruppo telaio- forcella / Frame voorv
38、ork samenscholing Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 9 Figure 1b Ensemble cadre fourche / Frame fork assembly / Rahmen und Gabel / Gruppo telaio- forcella / Frame voorvork samenscholing L
39、icensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:2008 (E) 10 Table 2 - Ensemble de direction / Head assembly / Steuersatz und Lenkung / Gruppo sterzo / Balhoofd samenscholing Number FRANAIS ENGLISH DEUTSCH ITALI
40、ANO DUTCH 2.1 Jeu de direction cne rglable Head set with adjustable cone Steuersatz mit Gewindekonus, einstellbar Serie sterzo con cono registrabile Balhoofd met stelmoer 2.2 Jeu de direction cuvette rglable Head set with adjustable cup Steuersatz mit Gewindeschale, einstellbar Serie sterzo con calo
41、tta registrabile Balhoofd met instelbare cups 2.3 Jeu de direction billes Head set with ball race Steuersatz mit Axiallager Serie sterzo a sfere Balhoofd met kogellager 2.4 Contre-crou de direction Head lock nut Abschlumutter Dado serrasterzo Balhoofd sluitmoer 2.5 Rondelle de direction - avec ergot
42、 - sans ergot Spacing washer - with key washer - without key washer Distanzscheibe - mit Sicherung - ohne Sicherung Rondella dello sterzo - con dentello - senza dentello Opvulplaatje - met borging - zonder borging 2.6 Cne rglable de direction Screwed race, head adjusting cone Gewindekonus Cono regis
43、trabile dello sterzo Conus met schroefdraad 2.7 Cage billes Ball-bearing cage, ball-bearing retainer Kugelring Gabbietta a sfere Kogellagerkooi 2.8 Cuvette suprieure de direction Upper head cup Lenkungslagerschale oben Calotta superiore dello sterzo Bovenste balhoofdcup 2.9 Cuvette infrieure de dire
44、ction Lower head cup Lenkungslagerschale unten Calotta inferiore dello sterzo Onderste balhoofdcup 2.10 Cne de fourche Crown race Gabelkonus Cono forcella Voorvoork conus 2.11 Cuvette rglable de direction Top head race, head adjusting cup Gewindeschale Calotta superiore registrabile dello sterzo Cup
45、 met schroefdraad 2.12 Cne suprieure de direction Screwed race, upper head cone Lenkungslagerkonus oben Cono superiore dello sterzo Bovenste stuurlager conus Licensed Copy: London South Bank University, South Bank University, 31/01/2009 03:11, Uncontrolled Copy, (c) BSI BS EN 15532:2008 EN 15532:200
46、8 (E) 11 2.13 Cuvette rglable de direction Top head race, head adjusting race Kugellaufring oben Calotta registrabile dello sterzo Bovenste stelcone 2.14 Billes Ball-bearings Kugeln Sfere Kogellagers 2.15 Cuvette suprieure de direction Top head race Lenkungslagerschale oben Calotta superiore dello s
47、terzo Stuurlager schaal boven 2.16 Cuvette infrieure de direction Bottom head race Lenkungslagerschale unten Calotta inferiore dello sterzo Stuurlager schaal onder 2.17 Cne infrieure de direction Crown race Gabellagerschale Cono inferiore dello sterzo Stuurlager schaal 2.18 Cintre course Drop handle
48、bars Rennlenker Piega da corsa Racestuur 2.19 Cintre plat /cintre VTT Flat handlebars Flacher Lenker Piega manubrio piatta Vlak stuur 2.20 Cintre relev Upright handlebars Nach oben gezogener Lenker Piega Cross o BMX Rechtopstaand stuur 2.20 a) Cintre relev High-rise handlebars High-riser Lenker Pieg
49、a manubrio rialzata Hoogstuur 2.21 Ruban dhabillage de cintre Handlebar tape Lenkerband Nastro manubrio Stuurlint 2.22 Bouchon de guidon Handlebar plug Lenkerstopfen Tappo manubrio Stuurdop 2.23 Potence Handlebar stem Lenkervorbau Attacco manubrio Stuurpen 2.24 Vis dexpandeur Expander bolt, stem bolt Klemmspindel Vite espa