《BS-EN-4165-004-2007.pdf》由会员分享，可在线阅读，更多相关《BS-EN-4165-004-2007.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 4165-004:2007 Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 Product standard ICS 49.060 ? Copyright British Standards Institution Provided by IHS under lice
2、nse with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- BS EN 4165-004:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 2
3、9 February 2008 BSI 2008 ISBN 978 0 580 53140 8 National foreword This British Standard is the UK implementation of EN 4165-004:2007. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Panel ACE/6/-/3, Aeros
4、pace Connectors. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot co
5、nfer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking perm
6、itted without license from IHS -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4165-004 April 2007 ICS 49.060 English Version Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 C continuous - Part 004: Stackable mounting receptacle 2 and 4 modules,
7、 series 2 - Product standard Srie arospatiale - Connecteurs lectriques modulaires - Tempratures dutilisation 175 C continu - Partie 004 : Embase empilable 2 et 4 modules, srie 2 - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 17
8、5 C konstant - Teil 004: Anreihsteckdose mit Flansch mit 2 und 4 Modulen, Serie 2 - Produktnorm This European Standard was approved by CEN on 30 September 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
9、the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Ge
10、rman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech
11、 Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROP
12、EN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-004:2007: E Copyright British Standards Institution Provided by IHS
13、 under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Required characteristics.4
14、5 Stackable mounting receptacle, male or female modules 5 5.1 For 2 modules 5 5.2 For 4 modules 6 5.3 Receptacle classes7 6 Designation 8 7 Marking.8 8 Technical specification .8 EN 4165-004:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licen
15、see=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- 3 Foreword This document (EN 4165-004:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enqui
16、ries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national
17、 standard, either by publication of an identical text or by endorsement, at the latest by October 2007, and conflicting national standards shall be withdrawn at the latest by October 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r
18、ights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus,
19、 Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4165-004:2007 Copyright British Stand
20、ards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- 4 1 Scope This standard defines the stackable mounting receptacle series 2, for 2 or
21、 4 modules used in the family of rectangular electrical modular connectors, operating temperature 175 C continuous. The plugs corresponding to those receptacles are defined in EN 4165-002. The protective covers corresponding to those receptacles are defined in EN 4165-018. 2 Normative references The
22、 following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace produ
23、cts. EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification. EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of perfo
24、rmance and contact arrangements. EN 4165-003, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 003: Modules series 2 and series 3 Product standard.1) EN 4165-018, Aerospace series Connectors, electrical, rectangular, modular Operating temperat
25、ure 175 C continuous Part 018: Protective cover for receptacle 2 and 4 modules, series 2 and series 3 Product standard. EN 4165-020, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 020: Coupling system keyway for receptacle Product standard.
26、3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001 apply. 4 Required characteristics See Figure 1 and Table 1 for 2 modules. See Figure 2 and Table 2 for 4 modules. 1) Published as AECMA Prestandard at the date of publication of this standard. E
27、N 4165-004:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- 5 5 Stackable mounting receptacle, male or fe
28、male modules 5.1 For 2 modules See EN 4165-003. Dimensions are in millimetres. Key 1 Groove only for class F, W and A Figure 1 Table 1 Classes A max. Mass g F, W and A 15,20 14,80 J and M 16,00 EN 4165-004:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontro
29、lled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- 6 5.2 For 4 modules See EN 4165-003. Dimensions are in millimetres. Key 1 Groove only for class F, W and A Figure 2 Table 2 Classes A max. Mass g F, W
30、 and A 15,20 20,60 J and M 16,00 12,50 EN 4165-004:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- 7 5.3
31、 Receptacle classes See Table 3. Table 3 Classes Description W Receptacle with housing (shell) olive drab cadmium plated, aluminium alloy, conductive finish, 500 h resistance to salt mist, maximum operating temperature 175 C continuous F Receptacle with housing (shell) black nickel plated, aluminium
32、 alloy, 96 h resistance to salt mist, maximum operating temperature 175 C continuous J Receptacle with housing (shell) olive drab cadmium plated, composite material, conductive finish, 500 h resistance to salt mist, maximum operating temperature 175 C continuous M Receptacle with housing (shell) nic
33、kel plated, composite material, conductive finish, 500 h resistance to salt mist, maximum operating temperature 175 C continuous A Receptacle with housing (shell) black anodised plated, aluminium alloy, non-conductive finish, 48 h resistance to salt mist, maximum operating temperature 175 C continuo
34、us EN 4165-004:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- 8 6 Designation EXAMPLE Description block
35、 ELECTRICAL CONNECTOR RECEPTACLE Identity block EN4165F0A400 Number of the basic standard Classes type (see Table 3) Type 0 = Receptacle (see EN 4165-002) Type A = Series 2 (see EN 4165-002) Shells type 4 = Stackable mounting receptacle 4 modules 2 = Stackable mounting receptacle 2 modules Receptacl
36、e keying coupling (not marked on the connector) Nothing = Not delivered 0 = Standard 1 2 3 4 5 6 Special coding State of delivery receptacle keying coupling (see EN 4165-020) (not marked on the connector) 0 = Delivered: not mounted 1 2 3 4 5 6 Mounting in the receptacle 7 Marking Unless there are ot
37、her specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 Technical specification See EN 4165-001. EN 4165-004:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Res
38、ale, 08/14/2008 20:31:57 MDTNo reproduction or networking permitted without license from IHS -,-,- blank Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:31:57 MDTNo reproduction or networki
39、ng permitted without license from IHS -,-,- BS EN 4165-004:2007 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level.
40、It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grate
41、ful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual upd
42、ating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email:
43、ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provi
44、des a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:
45、+44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8
46、996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI pub
47、lications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of