《BS-EN-60335-2-14-1997.pdf》由会员分享，可在线阅读，更多相关《BS-EN-60335-2-14-1997.pdf（28页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60335-2-14: 1997 Incorporating Amendment No. 1, Corrigendum No. 1 and Amendments Nos. 2 and 3 Safety of household and similar electrical appliances Part 2-14: Particular requirements for kitchen machines The European Standard EN 60335-2-14:1996 with the incorporation of amendm
2、ents A11:1998, A1:1998 and A2:2000 has the status of a British Standard ICS 97.040.50 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:48:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60335-2-14:1997 This British S
3、tandard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 January 1997 BSI 03-2001 The following BSI references relate to the work on this standard: Committee reference CPL/61/2
4、7 Draft for comment 93/217052 DC ISBN 0 580 26861 6 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee CPL/61, Safety of electrical appliances, to Subcommittee CPL/61/27 Food preparation machines, upon which the following bo
5、dies were represented: Association of Control Manufacturers (TACMA (BEAMA Ltd.) Association of Manufacturers of Domestic Electrical Appliances British Electrotechnical Approvals Board Consumer Policy Committee of BSI Department of Trade and Industry (Consumer Safety Unit, CA Division) Electricity As
6、sociation Amendments issued since publication Amd. No.DateComments 10480August 1999 10730 Corrigendum October 1999Typographic corrections 10504December 1999See national foreword 11087March 2001See national foreword Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:48:20 GMT+00:00 2006, Uncon
7、trolled Copy, (c) BSI BS EN 60335-2-14:1997 BSI 03-2001 i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Introduction3 Text of EN 60335-2-145 National annex NA (informative) Original IEC text amended by CENELEC common modifications23 Licensed Copy: sheffieldun s
8、heffieldun, na, Mon Nov 13 17:48:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60335-2-14:1997 ii BSI 03-2001 National foreword This British Standard has been prepared by Subcommittee CPL/61/27 and is the English language version of EN 60335-2-14:1996, Safety of household and similar electrica
9、l appliances Part 2-14: Particular requirements for kitchen machines, including amendments A11:1998, A1:1998, A2:2000 and Corrigendum November 1998 published by the European Committee for Electrotechnical Standardization (CENELEC). It was derived by CENELEC from IEC 60335-2-14:1994, including amendm
10、ent 1:1998 and amendment 2:1999 published by the International Electrotechnical Commission (IEC). This British Standard supersedes BS 3456-202:Section 202.14:1990 which will be withdrawn on 1 January 1999 in accordance with the CENELEC Internal Regulations. Certificates and marks will not be awarded
11、 after this date with respect to BS 3456-202:Section 202.14:1990. However, such certificates and marks, already awarded, may continue to apply for production until 1 January 2004. The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of ea
12、ch common modification is indicated in the text by tags ? . Where a common modification has been introduced by amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11 are indicated by ?. The start and finish of the text introdu
13、ced or altered by amendment is indicated in the text by tags ? . Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by ? and text altered by IEC amendment 2 is indicated by ? . Corrigendum November 1998 introduced the
14、CENELEC introduction. This British Standard is to be read in conjunction with BS EN 60335-1:1995 Specification for safety of household and similar electrical appliances Part 1: General requirements. The many references to Part 1 should be read as references to BS EN 60335-1, which is the English lan
15、guage version of EN 60335-1:1994 which was derived from the second impression, 1993, of IEC publication 60335-1 (third edition 1991). Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or re
16、vision of Part 1. Product approval. Attention is drawn to the fact that products conforming to this British Standard may be approved by the British Electrotechnical Approvals Board for the purposes of participation in the CENELEC Certification Agreement and in the CB Scheme of the IECEE. (Details of
17、 the BEAB Approval Scheme are given on the inside back cover.) A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity fr
18、om legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 23 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Licensed Copy: sheffieldun sheffiel
19、dun, na, Mon Nov 13 17:48:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60335-2-14 September 1996 + A11 October 1998 + A1 November 1998 + A2 January 2000 ICS 97.040.50Supersedes EN 60335-2-14:1988 and its amendments and EN 60335-2-33:1990 Includes
20、 Corrigendum November 1998 Descriptors: household electrical appliances, kitchen machines, safety requirements, protection against electric shock, fire protection, protection against mechanical hazard English version Safety of household and similar electrical appliances Part 2-14: Particular require
21、ments for kitchen machines (includes amendments A11:1998, A1:1998 and A2:2000) (IEC 60335-2-14:1994, modified + A1:1998 + A2:1999) Scurit des appareils lectrodomestiques et analogues Partie 2-14: Rgles particulires pour les machines de cuisine (inclut les amendements A11:1998, A1:1998 et A2:2000) (C
22、EI 60335-2-14:1994, modifie + A1:1998 + A2:1999) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-14: Besondere Anforderungen fr Kchenmaschinen (enthlt nderungen A11:1998, A1:1998 und A2:2000) (IEC 60335-2-14:1994, modifiziert + A1:1998 + A2:1999) This European Standard wa
23、s approved by CENELEC on 1996-07-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning suc
24、h national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own l
25、anguage and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portuga
26、l, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENEL
27、EC members Ref. No. EN 60335-2-14:1996 + A11:1998 + A1:1998 + A2:2000 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:48:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60335-2-14:1996 BSI 03-2001 2 Foreword The proposal to endorse IEC 335-2-14:1994, document CLC/TC 61 (SEC) 980, was ci
28、rculated under the enquiry procedure in September 1994. This proposal was discussed during the Dublin meeting in May 1995, when it was decided to submit a draft for EN 60335-2-14 to the formal vote. This draft was circulated in January 1996 and was ratified by CENELEC as EN 60335-2-14 on 1996-07-02.
29、 This European Standard has been prepared by the secretariat of CENELEC Technical Committee TC 61. The following dates are applicable: For products which have complied with EN 60335-2-14:1988 including its amendments A1:1990, A51:1991, A52:1992, A53:1993, A54:1995 and EN 60335-2-33:1990 before 1999-
30、01-01, as shown by the manufacturer or by a certification body, these previous standards may continue to apply for production until 2004-01-01. This standard has to be used in conjunction with EN 60335-1, Safety of household and similar electrical appliances Part 1: General requirements. It was esta
31、blished on the basis of the 1994 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This Part 2 supplements or modifies the corresponding cla
32、uses of EN 60335-1, so as to convert it into the European Standard; Safety requirements for electric kitchen machines. Where a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as far as is reasonable. Where this standard states “addition”, “modification” or “rep
33、lacement”, the relevant text of Part 1 is to be adapted accordingly. Subclauses and figures which are additional to those in Part 1 are numbered starting with 101. There are no special national conditions causing a deviation from this European Standard, other than those listed in annex ZA to EN 6033
34、5-1. There are no national deviations from this European Standard, other than those listed in annex ZB to EN 60335-1. NOTEThe following print types are used; requirements: in roman type; test specifications: in italic type; notes in small roman type. Words in bold in the text are defined in clause 2
35、. When a definition of Part 1 concerns an adjective, the adjective and the associated noun are also in bold. Foreword to amendment A11 A proposal to amend EN 60335-2-14:1996, document CLC/BT(IT)206, was discussed during the Fehraltorf meeting of TC 61 in October 1997, when it was decided to establis
36、h a working group to prepare a proposal for further consideration. The outcome of the working group was presented to the 94th CENELEC Technical Board meeting, when it was decided to submit the draft to a 3-month enquiry, document CLC/TC 61(SEC)1164. The results of the enquiry were discussed during t
37、he Brussels meeting of TC 61 in May 1998 when it was decided to submit a draft for an amendment to the formal vote (2MV) after further consideration by the working group. This draft was circulated in July 1998 and was ratified by CENELEC as amendment A11 on 1998-10-01. The following dates are applic
38、able: This amendment supplements or modifies the corresponding clauses of EN 60335-2-14:1996. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. latest date by which the EN has to be implemented at national level by
39、 publication of an identical national standard or by endorsement(dop) 1997-01-01 date on which national standards conflicting with the EN have to be withdrawn(dow) 1999-01-01 latest date by which the amendment has to be implemented at national level by publication of an identical national standard o
40、r by endorsement(dop) 1999-03-01 date on which national standards conflicting with the amendment have to be withdrawn(dow) 1999-06-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:48:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60335-2-14:1996 BSI 03-2001 3 Foreword to amendment A1 T
41、he text of document 61/1465/FDIS, future amendment to IEC 60335-2-14:1994 prepared by the IEC Technical Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-14 on 1998-10-01. The following dates are applicable: This amendment suppleme
42、nts or modifies the corresponding clauses of EN 60335-2-14:1996. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the sc
43、ope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. If the product has mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 89/392/EEC, has shown that the risks are mainly of electrical origin and consequently this directive is not applic
44、able. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. Foreword to amendment A2 The text of document 61/1647/FDIS, future amendment to IEC 60335-2-14:1994 prepared by the I
45、EC Technical Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60335-2-14 on 1999-12-01. The following dates are applicable: This amendment supplements or modifies the corresponding clauses of EN 60335-2-14:1996. There are no special natio
46、nal conditions causing a deviation from this amendment. There are no national deviations from this amendment. latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1999-07-01 date on which national standards
47、 conflicting with the amendment have to be withdrawn(dow) 2001-07-01 latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2000-09-01 date on which national standards conflicting with the amendment have to b
48、e withdrawn(dow) 2002-12-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:48:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60335-2-14:1996 4 BSI 03-2001 Contents Page Foreword2 1 Scope 5 2 Definitions 6 3 General requirement 8 4 General conditions for the tests 8 5 Void 9 6 Classifica
49、tion 9 7 Marking and instructions 9 8 Protection against access to live parts 9 9 Starting of motor-operated appliances 9 10 Power input and current 9 11 Heating 9 12 Void 11 13Leakage current and electric strength at operating temperature 11 14 Void 11 15 Moisture resistance 11 16 Leakage current and electric strength 11 17 Overload protection of transformers and associated circuits 11 18 Endurance 11 19 Abnormal operation 12 20 Stability and mechanical hazards 12 21 Mechanical strength 17 22 Construction 17