《BS-EN-60264-3-5-1998 IEC-60264-3-5-1996.pdf》由会员分享，可在线阅读，更多相关《BS-EN-60264-3-5-1998 IEC-60264-3-5-1996.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60264-3-5:1998 IEC 60264-3-5: 1996 Including Corrigendum Nov. 1996 Packaging of winding wires Part 3: Taper barrelled delivery spools Section 5: Specification for spool containers made from thermoplastic material The European Standard EN 60264-3-5:1996 has the status of a Brit
2、ish Standard ICS 55.060 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60264-3-5:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the S
3、tandards Committee and comes into effect on 15 November 1998 BSI 04-1999 ISBN 0 580 30484 1 National foreword This British Standard is the English language version of EN 60264-3-5:1996. It is identical with IEC 60264-3-5:1996, including the Corrigendum issued in November 1996. The UK participation i
4、n its preparation was entrusted to Technical Committee GEL/55, Winding wires, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests inf
5、ormed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC
6、27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which lists no
7、rmative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards C
8、orrespondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard doe
9、s not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendmen
10、ts incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60264-3-5:1998 BSI 04-1999i Contents Pag
11、e National forewordInside front cover Foreword2 Text of EN 60264-3-53 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEA
12、N STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60264-3-5 December 1996 ICS 55.060 Descriptors: Winding, electric wire, insulated wire, delivery, spool, packaging, thermoplastic, designation, specification, dimension, test English version Packaging of winding wires Part 3: Taper barrelled delivery spo
13、ols Section 5: Specification for spool containers made from thermoplastic material (IEC 264-3-5:1996 + corrigendum 1996) Conditionnement des fils de bobinage Partie 3: Bobines de livraison ft de forme conique Section 5: Spcification pour les conteneurs de bobine faits de matriau thermoplastique (CEI
14、 264-3-5:1996 + corrigendum 1996) Verpackung von Wickeldrhten Teil 3: Lieferspulen mit konischem Kern Hauptabschnitt 5: Spezifikationen fr Behlter aus thermoplastischem Werkstoff (IEC 264-3-5:1996 + Corrigendum 1996) This European Standard was approved by CENELEC on 1996-10-01. CENELEC members are b
15、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the
16、 Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the sa
17、me status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committ
18、ee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No. EN 60264-3-5:1996 E Licensed Copy: sheffieldun sheffie
19、ldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-5:1996 BSI 04-1999 2 Foreword The text of document 55/493/FDIS, future edition 1 of IEC 264-3-5, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN
20、60264-3-5 on 1996-10-01. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 264-3-5:1996 and its corrigendum No
21、vember 1996 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 Introduction3 1Scope3 2Normative references3 3Material 3 4Type designation3 5Requirements3 Annex ZA (normative) Normative references to international publications with their corresponding Eur
22、opean publicationsInside back cover Table 1 Mass3 Table 2 Loads4 Table 3 Loads and distance “a”4 Table 4 Impact data4 Table 5 Lifting data4 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1997-07-01 latest da
23、te by which the national standards conflicting with the EN have to be withdrawn(dow) 1997-07-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-5:1996 BSI 04-19993 Introduction This International Standard is one of a series which
24、deals with insulated wires used for windings in electrical equipment. The series comprises three groups describing: 1) Methods of test (IEC 851); 2) Specifications (IEC 317); 3) Packaging (IEC 264). 1 Scope This section of IEC 264-3 specifies the requirements for spool containers made from thermopla
25、stic material and used for taper barrelled delivery spools. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this section of IEC 264-3. At the time of publication, the editions indicated were valid. All normat
26、ive documents are subject to revision, and parties to agreement based on this section of IEC 264-3 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International
27、 Standards. IEC 264-3-4:1990, Packaging of winding wires Part 3: Taper barrelled delivery spools Section 4: Basic dimensions of containers for taper barrelled delivery spools. IEC 264-4-2:1992, Packaging of winding wires Part 4: Methods of test Section 2: Containers made from thermoplastic material
28、for taper barrelled delivery spools. 3 Material The spool containers shall be made from thermoplastic material (for example modified polystyrene) that satisfies the requirements given in this standard. 4 Type designation Spool containers according to this standard shall be identified by the spool ty
29、pe specified in IEC 264-3-4, for example as follows: Spool container 264-3-5/IEC 250/400. 5 Requirements For methods of test, see IEC 264-4-2. 5.1 Surface, markings, colour 5.1.1 Surface The inner surface of the spool container and the wire take-off opening shall be smooth and free from protruding m
30、aterial. 5.1.2 Markings Each spool container shall have embossed and/or engraved markings, located on the container outer surface, containing the following information: a) the type designation of the spool container (for example 264-3-5/IEC 250/400); b) name and/or trademark of the container manufac
31、turer; c) year of manufacture; d) the nominal mass of the spool container, in grams. 5.2 Mass The mass of the spool container shall comply with the value given in Table 1. Table 1 Mass 5.3 Dimensions The spool container dimensions and tolerances shall comply with the dimensions and tolerances given
32、in IEC 264-3-4. 5.4 Behaviour after high temperature test The spool container dimensions and tolerances shall comply with dimensions and tolerances given in IEC 264-3-4. 5.5 Behaviour after moisture test The spool container dimensions and tolerances shall comply with the dimensions and tolerances gi
33、ven in IEC 264-3-4. 5.6 Load resistance test 5.6.1 At room temperature The spool container dimensions shall comply with the dimensions and tolerances given in IEC 264-3-4 after the application of the load given in Table 2. Mass Container for spool typeNominalTolerance g% 250/400 315/500 400/630 500/
34、800 2 450 4 750 9 000 15 000 3 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-5:1996 4 BSI 04-1999 Table 2 Loads 5.6.2 After elevated temperature The spool container shall be loaded with a load given in Table 3 and conditioned at
35、 a temperature of (70 3) C. The angle ! shall be 30 and the distance “a” shall be as given in Table 3. The maximum deformations of the dimensions and tolerances given in IEC 264-3-4 shall be agreed upon between manufacturer and user. Table 3 Loads and distance “a” 5.7 Impact test 5.7.1 At room tempe
36、rature The function of the spool container shall not be destroyed after testing the container with the values given in Table 4. Table 4 Impact data 5.7.2 At low temperature Under consideration 5.8 Lifting capability After testing the container with the mass and the lifting height given in Table 5, t
37、he parts of the container shall not become loose or detached. The rope or lifting device and securing of these shall not be broken. Table 5 Lifting data Container for spool type Load kg 250/400 315/500 400/630 500/800 315 500 630 900 Container for spool type LoadDistance “a” kgmm 250/400 315/500 400
38、/630 500/800 315 500 630 900 1 800 1 600 1 250 700 Container for spool type Strike heightsaMass of the hammer h1 mm h2 mm h3 mmkg 250/40050012,5 315/5002 35080015022,5 400/6301 00032,5 500/8001 25042,5 a See Figure 2 of IEC 264-4-2 Container for spool type Mass kg Lifting height mm 250/400 315/500 4
39、00/630 50 100 200 500 500 500 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-5:1996 BSI 04-1999 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European
40、Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications appl
41、y to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevan
42、t EN/HD applies. PublicationYearTitleEN/HDYear IEC 264-3-41990Packaging of winding wires Part 3: Taper barrelled delivery spools Section 4: Basic dimensions of containers for taper barrelled delivery spools EN 60264-3-41994 IEC 264-4-21992Part 4: Methods of test Section 2: Containers made from therm
43、oplastic material for taper barelled delivery spools EN 60264-4-21994 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60264-3-5:1998 IEC 60264-3-5: 1996 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is
44、the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure
45、 that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsib
46、le, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, internat
47、ional and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise req
48、uested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and servi
49、ces. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under