《BS-EN-60335-2-6-1999 IEC-60335-2-6-1997.pdf》由会员分享，可在线阅读，更多相关《BS-EN-60335-2-6-1999 IEC-60335-2-6-1997.pdf（34页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60335-2-6:1999 IEC 60335-2-6:1997 Incorporating Amendment No. 1 Safety of household and similar electrical appliances Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances for household use The European Standard EN 60335-2-6:1999,
2、with the incorporation of amendment A1:2001, has the status of a British Standard ICS 97.040.20 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60335-2-6:1999 This British Standard, having been prepared under the direction of the Ele
3、ctrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 December 1999 BSI 02 August 2002 ISBN 0 580 28026 8 National foreword This British Standard is the English language version of EN 60335-2-6:1999, including amendment A1:2001. It w
4、as derived by CENELEC from IEC 60335-2-6:1997, including Corrigendum 1998 and amendment 1:2000. It supersedes BS EN 60335-2-6:1991 which will be withdrawn on 2006-04-01. The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by a sideline in th
5、e margin. The start and finish of text introduced or altered by amendment is indicated in the text by tags ?. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by ?. The UK participation in its preparation was entrust
6、ed by Technical Committee CPL/61, Safety of electrical appliances, to Subcommittee CPL/61/07, Safety of electrical appliances Heated appliance group, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on th
7、e interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Sta
8、ndards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. Th
9、is publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside fr
10、ont cover, pages i and ii, the EN title page, pages 2 to 29 and a back cover. The BSI copyright in this document indicates the most recent changes by amendment. Amendments issued since publication Amd. No.DateComments 1371702 August 2002 See national foreword Licensed Copy: sheffieldun sheffieldun,
11、na, Mon Nov 13 17:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60335-2-6:1999 BSI 02 August 2002 i Contents Page National forewordInside front cover Foreword2 Text of EN 60335-2-65 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii
12、 blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60335-2-6 June 1999 + A1 November 2001 ICS 13.120; 97.040.20Supersedes EN 60335-2-6:1990 and its amendments English version Safety of
13、 household and similar electrical appliances Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances for household use (includes amendment A1:2001) (IEC 60335-2-6:1997 + corrigendum 1998 + A1:2000, modified) Scurit des appareils lectrodomestiques et analog
14、ues Partie 2: Rgles particulires pour les cuisinires, les fours et appareils fixes analogues (inclut lamendement A1:2001) (CEI 60335-2 6:1997 + corrigendum 1998 + A1:2000, modifie) Sicherheit elecktrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2: Besondere Anforderungen fr ortsfeste Herd
15、e, Kochmulden, Backfen und hnliche Gerte enthlt nderung A1:2001) (IEC 60335-2-6:1997 + Berichtigung 1998 + A1:2000, modifiziert) This European Standard was approved by CENELEC on 1999-04-01. Amendment A1 was approved by CENELEC on 2001-09-01. CENELEC members are bound to comply with the CEN/CENELEC
16、Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENEL
17、EC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
18、CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechni
19、cal Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335
20、-2-6:1999 + A1:2001 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60335-2-6:1999 BSI 02 August 2002 2 Foreword The text of document 61/1073/FDIS, future fourth edition of IEC 60335-2-6 prepared by the IEC Technical Committee 61, was s
21、ubmitted to the IEC-CENELEC parallel vote in December 1996 but the draft did not receive sufficient support in CENELEC. The comments were discussed during the Edinburgh meeting in May 1997 and during the Fehraltorf meeting in october 1997, when it was decided to submit a new draft for EN 60335-2-6 t
22、o the formal vote. This draft was circulated in August 1998 and was ratified by CENELEC as EN 60335-2-6 on 1999-04-01. This European Standard replaces EN 60335-2-6:1990 + corrigendum June 1991 and its amendments A2:1992, A51:1993 + corrigendum May 1993, A3:1993, A52:1995, A53:1995 and A54:1997. The
23、following dates are applicable: This standard has to be used in conjunction with EN 60335-1, Safety of household and similar electrical appliances, Part 1: General requirements. It was established on the basis of the 1994 edition of that standard. Amendments and revisions of Part 1 have also to be t
24、aken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This Part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for stationary cooking
25、ranges, hobs, ovens and similar appliances. When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text of Part 1 is to be adapted accordingly. Subclaus
26、es, figures and tables which are additional to those in Part 1 are numbered starting with 101. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. National deviations from this European Standard are listed in An
27、nex ZB and are in addition to those in EN 60335-1. NOTEThe following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in clause 2. When a definition of Part 1 concerns an adjective, the adjective
28、 and the associated noun are also in bold. Foreword to amendment A1 The text of amendment 1:2000 to the International Standard IEC 60335-2-6:1997, prepared by the IEC Technical Committee 61, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment A1 to EN 60335-2-6:
29、1999 on 2001-09-01. The following dates are applicable: This amendment supplements or modifies the corresponding clauses of EN 60335-2-6:1999. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. latest date by which
30、the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2000-01-01 date on which national standards conflicting with the EN have to be withdrawn(dow) 2006-04-01 latest date by which the amendment has to be implemented at national level b
31、y publication of an identical national standard or by endorsement(dop) 2002-08-01 date on which national standards conflicting with the amendment have to be withdrawn(dow) 2006-04-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60335-2
32、-6:1999 BSI 02 August 2002 3 Contents Page Foreword2 Introduction5 1Scope5 2Definitions5 3General requirement8 4General conditions for the tests8 5Void9 6Classification9 7Marking and instructions9 8Protection against access to live parts10 9Starting of motor-operated appliances11 10Power input and c
33、urrent11 11Heating11 12Void14 13Leakage current and electric strength at operating temperature15 14Void16 15Moisture resistance16 16Leakage current and electric strength17 17Overload protection of transformers and associated circuits17 18Endurance17 19Abnormal operation18 20Stability and mechanical
34、hazards19 21Mechanical strength19 22Construction20 23Internal wiring23 24Components23 25Supply connection and external flexible cords24 26Terminals for external conductors24 27Provision for earthing24 28Screws and connections24 29Creepage distances, clearances and distances through insulation24 30Re
35、sistance to heat, fire and tracking25 31Resistance to rusting25 32Radiation, toxicity and similar hazards25 Figures26 Annexes29 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 4 blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17
36、:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60335-2-6:1999 BSI 02 August 2002 5 Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. If the product has mechanical mo
37、ving parts, a risk assessment in accordance with the Machinery Directive, 89/392/EEC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standar
38、d together with the principal objectives of the Low Voltage Directive. 1 Scope This clause of Part 1 is replaced by: This standard deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage being not more than 250 V for sing
39、le-phase appliances connected between one phase and neutral, and 480 V for other appliances. NOTE 1Examples of appliances which are within the scope of this standard: stationary grills; stationary griddles; pyrolytic self-cleaning ovens; induction hobs; steam ovens; the electrical part of appliances
40、 supplied with energy other than electricity. So far as practicable, this standard deals with the common hazards presented by appliances which are encountered by all persons in and around the home. This standard does not in general take into account the use of appliances by young children or infirm
41、persons without supervision.; playing with the appliance by young children. NOTE 2Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; for appliances intended to be used in tropical countries speci
42、al requirements may be necessary; in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. NOTE 3This standard does not apply to applia
43、nces intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); portable cooking appliances (IEC 60335-2-9); microwave cooking appliances (IEC 60335-2-2
44、5); commercial electric ranges, ovens and hob elements (IEC 60335-2-36); commercial electric griddles and griddle grills (IEC 60335-2-38); commercial electric forced convection ovens, steam cookers and steam convection ovens (IEC 60335-2-42). NOTE 4Requirements for combination microwave ovens are un
45、der consideration; meanwhile IEC 60335-2-25 may be used in conjunction with this standard. NOTE Z1For appliances which are supplied with gas, EN 30 is also applicable. 2 Definitions This clause of Part 1 is applicable except as follows 2.2.6 Addition: NOTEFor appliances having more than three heatin
46、g units per phase, a diversity factor is applied to the rated power input when determining the current used to establish the size of the terminals and the nominal cross-sectional area of the supply cord. The diversity factor F is calculated from the following formula, where N is the number of heatin
47、g units per phase which can be energized together: Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 17:51:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60335-2-6:1999 6 BSI 02 August 2002 2.2.9 Replacement: normal operation operation of the appliance as specified in 2.2.9.1 to 2.2.9.6. 2.2.
48、9.1 Hob elements other than induction hob elements, are operated with vessels containing cold water. The vessel is made of unpolished commercial quality aluminium, has a flat bottom and is covered with a lid. Thermal controls are adjusted to their highest setting until the water boils and then adjus
49、ted so that the water boils gently. Water is added to maintain the level during boiling. NOTE 1The lid is positioned so that steam does not affect the test. In case of doubt, vessels as specified in Figure 101 are used. Induction hob elements are operated with vessels as specified in Figure 102 which contain approximately half their capacity of cooking oil at room temperature. Thermal