《BS-EN-61995-1-2008.pdf》由会员分享，可在线阅读，更多相关《BS-EN-61995-1-2008.pdf（66页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61995-1:2008 Devices for the connection of luminaires for household and similar purposes Part 1: General requirements ICS 29.120.20; 29.140.40 ? Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not
2、 for Resale, 08/14/2008 21:32:59 MDTNo reproduction or networking permitted without license from IHS -,-,- BS EN 61995-1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2008 BSI 2008 ISBN 978 0 580 54128 5 National foreword This
3、British Standard is the UK implementation of EN 61995-1:2008. It was derived by CENELEC from IEC 61995-1:2005. The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by tags (e.g. ). The UK participation in its preparation was entrusted to Tech
4、nical Committee PEL/23, Electrical accessories. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance wi
5、th a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:32:59 MDTNo
6、reproduction or networking permitted without license from IHS -,-,- EUROPEAN STANDARD EN 61995-1 NORME EUROPENNE EUROPISCHE NORM May 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung C
7、entral Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61995-1:2008 E ICS 29.120.20; 29.140.40 English version Devices for the connection of luminaires for household and simi
8、lar purposes - Part 1: General requirements (IEC 61995-1:2005, modified) Dispositifs de connexion pour luminaires pour usage domestique et analogue - Partie 1: Exigences gnrales (CEI 61995-1:2005, modifie) Betriebsmittel fr den Anschluss von Leuchten fr Haushalt und hnliche Zwecke - Teil 1: Allgemei
9、ne Anforderungen (IEC 61995-1:2005, modifiziert) This European Standard was approved by CENELEC on 2008-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
10、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made
11、by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Est
12、onia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright British Standards Institution Provided by IHS under lic
13、ense with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:32:59 MDTNo reproduction or networking permitted without license from IHS -,-,- BS EN 61995-1:2008 2 Foreword The text of the International Standard IEC 61995-1:2005, prepared by SC 23B, Plugs, socket-outle
14、ts and switches, of IEC TC 23, Electrical accessories, together with common modifications prepared by the Technical Committee CENELEC TC 23BX, D.C. plugs and socket outlets and switches for household and similar fixed electrical installations, was submitted to the Unique Acceptance Procedure and was
15、 approved by CENELEC as EN 61995-1 on 2008-04-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-04-01 latest date by which the national standards conflicting with the E
16、N have to be withdrawn (dow) 2013-04-01 Annexes ZA and ZB have been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61995-1:2005 was approved by CENELEC as a European Standard with agreed common modifications. _ Copyright British Standards Institution Provided by IH
17、S under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:32:59 MDTNo reproduction or networking permitted without license from IHS -,-,- CONTENTS 1 Scope 5 2 Normative references .5 3 Terms and definitions .6 4 General requirements .8 5 General notes o
18、n tests8 6 Ratings 9 7 Classification9 8 Marking10 9 Checking of dimensions12 10 Protection against electric shock.13 11 Provision for earthing15 12 Terminals and terminations.15 13 Construction of DCL outlets 27 14 Construction of DCL Plugs31 15 Resistance to ageing and to humidity33 16 Insulation
19、resistance and electric strength.34 17 Operation of earthing contacts 36 18 Making and breaking capacity.36 19 Temperature rise 37 20 Force necessary to insert and withdraw the plug .39 21 Flexible cables and their connection .39 22 Mechanical strength .42 23 Resistance to heat52 24 Screws, current-
20、carrying parts and connections.54 25 Creepage distances, clearances and distances through sealing compound 56 26 Resistance of insulating material to abnormal heat, to fire and to tracking58 27 Resistance to rusting60 28 EMC Requirements.60 Figure 1 Arrangement for checking damage to conductors 17 F
21、igure 2 Information for deflection test .26 Figure 3 Circuit diagram for temperature rise test .58 Figure 4 Apparatus for testing the flexible cable retention .40 Figure 5 Sequence of blows for parts A, B, C and D44 Figure 6 Arrangement for test on covers or cover-plates .46 3 BS EN 61995-1:2008 Ann
22、ex ZA (normative) Special national conditions.62 Annex ZB (normative) Normative references to international publications with their corresponding European publications63 Bibliography61 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing
23、Co/5910770001 Not for Resale, 08/14/2008 21:32:59 MDTNo reproduction or networking permitted without license from IHS -,-,- Figure 9 Examples of application of the gauge of Figure 7 in accordance with the requirements of 22.6.50 Figure 10 Gauge for verification of grooves, holes and reverse tapers.5
24、1 Figure 11 Sketch showing the direction of application of the gauge of Figure 1051 Figure 12 Ball pressure test apparatus 53 Table 1 Connection of copper conductors.16 Table 2 Values for checking damage to conductors .18 Table 3 Values for pull forces.19 Table 4 Core composition of conductors.19 Ta
25、ble 5 Screw torque values 20 Table 6 Test current for checking screwless terminals 23 Table 7 Conductors for deflection test 27 Table 8 Force for deflection test.27 Table 9 Forces to be applied to covers, cover-plates whose fixing is not dependent on screws29 Table 10 Test sequence for temperature r
26、ise test .39 Table 11 Cable dimensions for the flexible cable retention test .41 Table 12 Schedule of mechanical strength test.42 Table 13 Height of fall for impact test .43 Table 14 Creepage distances and clearances.58 4 BS EN 61995-1:2008 Figure 7 Gauge (thickness: about 2 mm) for the verification
27、 of the outline of covers or cover-plates48 Figure 8 Examples of application of the gauge of Figure 7 on covers fixed without screws on a mounting surface or supporting surface49 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/591
28、0770001 Not for Resale, 08/14/2008 21:32:59 MDTNo reproduction or networking permitted without license from IHS -,-,- DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES Part 1: General requirements 1 Scope NOTE 1 This standard does not cover integrated DCL-plugs (under consi
29、deration). This standard can also be applied to types other than those with standardised interface. NOTE 2 Void. DCL plugs and DCL outlets complying with this standard are suitable for use under the following conditions: an ambient temperature not normally exceeding 25 C, but occasionally reaching 3
30、5 C; NOTE 3 The effect of the heat generated by the luminaire may affect the ambient temperature local to the DCL. a temperature not exceeding 70 C at the terminals of the DCL outlet including the effect of heat generated by the luminaire and the passage of current. NOTE 4 The requirements and tests
31、 of this standard may also be used as a guide when testing DCLs which have different interface configurations or ratings. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undate
32、d references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-32:1975, Environmental testing Part 2: Tests Test Ed: Free fall IEC 60068-2-75:1997, Environmental testing Part 2: Tests Test Eh: Hammer test IEC 60112, Method for the determination of the pro
33、of and the comparative tracking indices of solid insulating materials 5 BS EN 61995-1:2008 This standard applies to devices for the connection of luminaires (DCL) intended for household and similar purposes, for the electrical connection of fixed luminaires of class I or class II to final circuits r
34、ated at not more than 16 A without providing a mechanical support for the luminaire. DCLs are intended for use according to their IP rating per EN 60529. Outlets have an earthing contact and a rated current of 6 A, plugs are rated at 6 A. The rated voltage is 250 V at 50 Hz. Copyright British Standa
35、rds Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:32:59 MDTNo reproduction or networking permitted without license from IHS -,-,- IEC 60227-5, Polyvinyl chloride insulated cables of rated voltages up to and includin
36、g 450/750V Part 5: Flexible cables (cords) IEC 60417-DB:1), Graphical symbols for use on equipment IEC 60529, Degrees of protection provided by enclosures IEC 60695-2-11, Fire hazard testing Part 2-11: Glowing/hot-wire based test methods Glow-wire flammability test method for end-products IEC 61032:
37、1997, Protection of persons and equipment by enclosures Probes for verification 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. Where the terms voltage and current are used, they imply r.m.s. values, unless otherwise specified. Throughout this st
38、andard the word “earthing“ is used for “protective earthing“. 3.1 device for connecting a luminaire DCL system comprising a DCL outlet and a DCL plug providing a fixed luminaire with electrical connection to and disconnection from a fixed installation NOTE The designations DCL, DCL outlet or DCL plu
39、g, are used when it is necessary to specify particular requirements and test specifications. 3.2 DCL outlet device for connecting a luminaire having socket-contacts designed to engage with the pins of a DCL plug and having terminals for the connection of cable 3.3 DCL plug device for connecting a lu
40、minaire having pins designed to engage with the contacts of a DCL outlet, also incorporating means for the electrical connection and mechanical retention of flexible cable 3.4 rewirable DCL plug DCL plug so constructed that the flexible cable can be replaced 3.5 non-rewirable DCL plug DCL plug so co
41、nstructed that it forms a complete unit with the flexible cable after connection and assembly by the manufacturer of the plug (see also 14.1) 1) “DB” refers to the IEC on-line database. 6 BS EN 61995-1:2008 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled
42、 Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:32:59 MDTNo reproduction or networking permitted without license from IHS -,-,- 3.6 moulded-on DCL plug non-rewirable DCL plug, the manufacture of which is completed by insulating material moulded around pre-assembled component parts
43、and the terminations of the flexible cable 3.7 rated voltage voltage assigned to the DCL plug or DCL outlet by the manufacturer 3.8 rated current current assigned to the DCL plug or DCL outlet by the manufacturer 3.9 mounting box box in or on a wall or ceiling, etc., for flush or surface application
44、, intended to house a DCL outlet 3.10 terminal insulated or non-insulated connecting device intended for reusable electrical connection of the external conductors 3.11 termination insulated or non-insulated connecting device intended for non-reusable electrical connection of the external conductors
45、3.12 clamping unit part or parts of a terminal necessary for the mechanical clamping and the electrical connection of the conductor(s) 3.13 screw-type terminal terminal for the connection and subsequent disconnection of a conductor or the interconnection of two or more conductors capable of being di
46、smantled, the connection being made, directly or indirectly, by means of screws or nuts of any kind 3.14 pillar terminal terminal with screw clamping in which the conductor is inserted into a hole or cavity, where it is clamped under the shank of the screw or screws. The clamping pressure may be app
47、lied directly by the shank of the screw or through an intermediate member to which pressure is applied by the shank of the screw NOTE Examples of pillar terminals are shown in IEC 60999-1. 3.15 screw terminal terminal with screw clamping in which the conductor is clamped under the head of the screw. The clamping pressure may be applied directly by the head of the screw or through an intermediate part, such as a washer, clamping plate or anti-spread device NOTE Examples of screw terminals are shown in IEC 60999-1. 7 BS EN 61995-1:2008 Copyright British Standards Institution Provide