《BS-EN-60966-2-3-1999 IEC-60966-2-3-1996.pdf》由会员分享，可在线阅读，更多相关《BS-EN-60966-2-3-1999 IEC-60966-2-3-1996.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60966-2-3:1999 IEC 60966-2-3: 1996 Radio frequency and coaxial cable assemblies Part 2-3: Detail specification for flexible coaxial cable assemblies The European Standard EN 60966-2-3:1999 has the status of a British Standard ICS 33.120.10 Licensed Copy: sheffieldun sheffieldu
2、n, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60966-2-3:1999 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 May 1999 BSI 0
3、3-2000 ISBN 0 580 32152 5 National foreword This British Standard is the English language version of EN 60966-2-3:1999. It is identical with IEC 60966-2-3:1996. The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wires and waveguides, RF connectors, and acces
4、sories for communication and signalling, to Subcommittee EPL/46/1, Communication cables, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK in
5、terests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For
6、instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex
7、which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspond
8、ence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of
9、itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 5 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be i
10、ndicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60966-2-3:1999 BSI 03-2000i Contents Page National forewordInside front
11、 cover Foreword2 Text of EN 60966-2-33 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EURO
12、PISCHE NORM EN 60966-2-3 February 1999 ICS 33.120.10 English version Radio frequency and coaxial cable assemblies Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:1996) Ensemble de cordons coaxiaux et de cordons pour frquences radiolectriques Partie 2-3: Spcificati
13、on particulire pour cordons coaxiaux souples (CEI 60966-2-3:1996) Konfektionierte Koaxial- und Hochfrequenzkabel Teil 2-3: Bauartspezifikation fr flexible konfektionierte Koaxialkabel (IEC 60966-2-3:1996) This European Standard was approved by CENELEC on 1999-01-01. CENELEC members are bound to comp
14、ly with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Sec
15、retariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as
16、 the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Com
17、mittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC me
18、mbers. Ref. No. EN 60966-2-3:1999 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-3:1999 BSI 03-2000 2 Foreword The text of the International Standard IEC 60966-2-3:1996, prepared by SC 46A, Coaxial cables, of IEC TC 46, Cables,
19、 wires, waveguides, R.F. connectors, and accessories for communication and signalling, was submitted to the formal vote and was approved by CENELEC as EN 60966-2-3 on 1999-01-01 without any modification. The following dates were fixed: This standard is to be used in conjunction with EN 60966-1:1993
20、and EN 60966-2-1:1995. Endorsement notice The text of the International Standard IEC 60966-2-3:1996 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 Introduction3 latest date by which the EN has to be implemented at national level by publication of an
21、identical national standard or by endorsement(dop) 2000-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2000-01-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-3:1999 BSI 03-2
22、0003 Introduction This detail specification relates to the subfamily of flexible coaxial cables and BNC connector assemblies. This detail specification should be used together with IEC 966-2-1 and IEC 966-1. It gives subfamily requirements and severities to apply. Under Qualification Approval, the q
23、ualification will be conducted in accordance with 13.3 of IEC 966-2-1 taking into account the specified variants. Only the tests whose results might depend on the variants will be repeated Under Capability Approval, the Qualification will be conducted on the relating CQCs as defined in 13.4 of IEC 9
24、66-2-1 and described in the CM. Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in 13.4 of IEC 966-2-1 and described in the CM. Reference document: IEC 169-8:1978, Radio-fr
25、equency connectors Part 8: R.F. coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock Characteristic impedance 50 ohms (type BNC) Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-3:1999 4 BSI
26、 03-2000 1Prepared by IEC SC 46A 2Document n Issue: Date: 966-2-3 First Issue 30/07/96 3Available from: IEC 3 rue de Varemb Genve Suisse 4Generic specification: Sectional specification Blank detail specification: IEC 966-1 IEC 966-2-1 IEC 966-2-2 5Additional references: IEC 169-8 Detail specificatio
27、n for flexible coaxial cable assemblies 6 7Characteristic impedance: 50 78Frequency range: 0 to 1 GHz 9Weight: 40 g/m + 37 g/m10Minimum inside radius: for static bending for dynamic bending 25 mm 75 mm 11 Climatic category:40/70/2112Applicable test group: Ba, Eb, Ez, Mn, ab 13 Connector typeIEC 169-
28、8(BNC)IEC 169-8(BNC) Straight plugRight angle plug Cable type96 IEC -50-3-1 or equivalent96 IEC -50-3-1 or equivalent Marking:Optional Taper sleeves:On both ends (colour optional) 14 variants1 2 3 a-a a-b b-b 15 Page 1 of 3 pages Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00
29、:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-3:1999 BSI 03-20005 16Inspection values, ratings or characteristics 17 Subclause 18 Value 19 Remarks Electrical Uniformity of impedance Voltage proof Insulation resistance Inner and outer conductor continuity 9.2 9.10 9.11 9.12 50 7 2 7 1,0 kV 105M7 OK
30、/no k 200 ps rise time Peak value Test voltage Low voltage d.c. 50 Hz 500 V, 1 min Mechanical Tensile Cable crushing Flexing Flexing endurance 10.1 10.4 10.2 10.3 interface OK/no interface OK/no OK/no OK/no 30 N Test 9.12 600 N Test 9.12 500 cycles Test 9.12 500 cycles Force 5 N 20/min Test 9.12 Rec
31、ommended grouping of testsRecommended severity 20 GroupTests 21 Subclause 22 Periodicity 23 NC IL 24 NQA AQL 25 n 26 c 27 Specimen BaVisual inspection Dimensional inspection 8.2 8.3 Lot by lot Lot by lot S3 S3 4,0 4,0 EzUniformity of impedance9.2Lot by lotII1,0 EbVoltage proof Insulation resistance
32、Inner and outer conductor continuity 9.10 9.11 9.12 Lot by lot Lot by lot Lot by lot II II II 1,0 1,0 1,0 MnTensile Cable crushing Flexing Flexing endurance 10.1 10.4 10.2 10.3 3 years 3 years 3 years 3 years 3 3 3 3 0 0 0 0 CQC variant(e) 1 l = 300 mm CQC variant(e) 1 l = 300 mm CQC variant(e) 1| l
33、 = 300 mm CQC variant(e) 1| l = 300 mm Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60966-2-3:1999 IEC 60966-2-3: 1996 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body r
34、esponsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest a
35、mendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can b
36、e found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards pub
37、lications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standard
38、s BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Ce
39、ntre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996
40、7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or tr
41、ansmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these deta
42、ils are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:23:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI