《BS-EN-62053-22-2003.pdf》由会员分享，可在线阅读，更多相关《BS-EN-62053-22-2003.pdf（20页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 62053-22:2003 Incorporating Corrigendum No. 1 Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) The European Standard EN 62053-22:2003 has the status of a British Standard ICS 17.220.20 ? Licensed C
2、opy: sheffieldun sheffieldun, na, Thu Nov 09 04:48:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 62053-22:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 June 2003 BSI 24 February 2004 ISBN 0 580 42127 9 National foreword This B
3、ritish Standard is the official English language version of EN 62053-22:2003. It is identical with IEC 62053-22:2003. It supersedes BS EN 60687:1993 which is obsolescent and will be withdrawn on 1 March 2006. The UK participation in its preparation was entrusted to Technical Committee PEL/13, Electr
4、icity meters, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalog
5、ue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corre
6、ct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests info
7、rmed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover. The BSI copyright date displayed in this document indicates when the document
8、 was last issued. Amendments issued since publication Amd. No. DateComments 15027 Corrigendum No. 1 24 February 2004Correction to supersession information Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 04:48:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 62053-22 NORME EU
9、ROPENNE EUROPISCHE NORM March 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in
10、any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62053-22:2003 E ICS 17.220.20 Supersedes EN 60687:1992 English version Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) (IEC 62053-22:2003) Eq
11、uipement de comptage de llectricit (c.a.) Prescriptions particulires Partie 22: Compteurs statiques dnergie active (classes 0,2 S et 0,5 S) (CEI 62053-22:2003) Wechselstrom-Elektrizittszhler - Besondere Anforderungen Teil 22: Elektronische Wirkverbrauchszhler der Genauigkeitsklassen 0,2 S und 0,5 S
12、(IEC 62053-22:2003) This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
13、and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp
14、onsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ir
15、eland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 04:48:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of document 13/1283/FDIS, future edition 1 of IEC 6205
16、3-22, prepared by IEC TC 13, Equipment for electrical energy measurement and load control, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62053-22 on 2003-03-01. This European Standard supersedes EN 60687:1992 + corrigendum March 1993. The following dates were fixed
17、: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-03-01 Annexes designated “normative“ are part
18、of the body of the standard. In this standard, annexes A, B and ZA are normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62053-22:2003 was approved by CENELEC as a European Standard without any modification. _ Page 2 EN 6205322:2003 Licens
19、ed Copy: sheffieldun sheffieldun, na, Thu Nov 09 04:48:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION.4 1 Scope.5 2 Normative references .5 3 Terms and definitions .6 4 Standard electrical values 6 5 Mechanical requirements6 6 Climatic conditions .6 7 Electrical requirements.6 7
20、.1 Power consumption.6 7.2 Influence of short-time overcurrents 7 7.3 Influence of self-heating 7 7.4 AC voltage test7 8 Accuracy requirements.8 8.1 Limits of error due to variation of the current .8 8.2 Limits of error due to influence quantities 9 8.3 Test of starting and no-load condition11 8.4 M
21、eter constant 12 8.5 Accuracy test conditions12 8.6 Interpretation of test results.13 Annex A (normative) Test circuit diagram for sub-harmonics14 Annex B (normative) Electromagnet for testing the influence of externally produced magnetic fields .16 Annex ZA (normative) Normative references to inter
22、national publications with their corresponding European publications .17 Figure A.1 Test circuit diagram (informative)14 Figure A.2 Burst fired wave-form15 Figure A.3 Informative distribution of harmonics (the Fourier analysis is not complete) 15 Figure B.1 Electromagnet for testing the influence of
23、 externally produced magnetic fields 16 Table 1 Power consumption including the power supply.6 Table 2 Variations due to self-heating7 Table 3 AC voltage tests8 Table 4 Percentage error limits (single-phase meters and polyphase meters with balanced loads) 8 Table 5 Percentage error limits (polyphase
24、 meters carrying a single-phase load, but with balanced polyphase voltages applied to voltage circuits) .9 Table 6 Influence quantities .9 Table 7 Voltage and current balance12 Table 8 Reference conditions.13 Table 9 Interpretation of test results.13 Page 3 EN 6205322:2003 Licensed Copy: sheffieldun
25、 sheffieldun, na, Thu Nov 09 04:48:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTRODUCTION This part of IEC 62053 is to be used with the following relevant parts of the IEC 62052, IEC 62053 and IEC 62059 series, Electricity metering equipment: IEC 62052-11:2003, Electricity metering equipment (a.
26、c.) General requirements, tests and test conditions Part 11: Metering equipment IEC 62053-11:2003, Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) Replaces particular requirements of IEC 60521: 1988 (2nd edition
27、) IEC 62053-21:2003, Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) Replaces particular requirements of IEC 61036: 2000 (2nd edition) IEC 62053-22:2003, Electricity metering equipment (a.c.) Particular requirements Part 22: St
28、atic meters for active energy (classes 0,2 S and 0,5 S) Replaces particular requirements of IEC 60687: 1992 (2nd edition) IEC 62053-31:1998, Electricity metering equipment (a.c.) Particular requirements Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) IEC 62
29、053-61:1998, Electricity metering equipment (a.c.) Particular requirements Part 61: Power consumption and voltage requirements IEC 62059-11:2002, Electricity metering equipment (a.c.) Dependability Part 11: General concepts IEC 62059-21:2002, Electricity metering equipment (a.c.) Dependability Part
30、21: Collection of meter dependability data from the field This part is a standard for type testing electricity meters. It covers the particular requirements for meters, being used indoors. It does not deal with special implementations (such as metering-part and/or displays in separate housings). Thi
31、s standard is intended to be used in conjunction with IEC 62052-11. When any requirement in this standard concerns an item already covered in IEC 62052-11, the requirements of this standard take precedence over the requirements of IEC 62052-11. This standard distinguishes: between accuracy class ind
32、ex 0,2 S and accuracy class index 0,5 S meters; between protective class I and protective class II meters; between meters for use in networks equipped with or without earth fault neutralizers. The test levels are regarded as minimum values that provide for the proper functioning of the meter under n
33、ormal working conditions. For special application, other test levels might be necessary and should be agreed on between the user and the manufacturer. Page 4 EN 6205322:2003 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 04:48:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ELECTRICITY METERIN
34、G EQUIPMENT (AC) PARTICULAR REQUIREMENTS Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) 1 Scope This part of IEC 62053 applies only to newly manufactured static watt-hour meters of accuracy classes 0,2 S and 0,5 S, for the measurement of alternating current electrical active ener
35、gy in 50 Hz or 60 Hz networks and it applies to their type tests only. It applies only to transformer-operated static watt-hour meters for indoor application consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output
36、(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter cas
37、e, then the relevant standards for these elements also apply. NOTE IEC 60044-1 describes transformers having a measuring range of 0,01 In to 1,2 In, or of 0,05 In to 1,5 In, or of 0,05 In to 2 In and transformers having a measuring range of 0,01 In to 1,2 In for accuracy classes 0,2 S and 0,5 S. As
38、the measuring ranges of a meter and its associated transformers have to be matched and as only transformers of classes 0,2 S and 0,5 S have the accuracy required to operate the meters of this standard, the measuring range of the meter will be 0,01 In to 1,2 In. It does not apply to: watt-hour meters
39、 where the voltage across the connection terminals exceeds 600 V (line- to-line voltage for meters for polyphase systems); portable meters and meters for outdoor use; data interfaces to the register of the meter; reference meters. The dependability aspect is covered by the documents of the IEC 62059
40、 series. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60044-1:1996,
41、 Instrument transformers Part 1: Current transformers IEC 60736:1982, Testing equipment for electrical energy meters IEC 62052-11:2002, Electricity metering equipment (a.c.) General requirements, tests and test conditions Part 11: Metering equipment IEC 62053-61:1998, Electricity metering equipment
42、(a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements Page 5 EN 6205322:2003 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 04:48:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 3 Terms and definitions For the purposes of this document, the terms and definition
43、s given in IEC 62052-11 apply. 4 Standard electrical values The values given in IEC 62052-11 apply. 5 Mechanical requirements The requirements of IEC 62052-11 apply. 6 Climatic conditions The conditions given in IEC 62052-11 apply. 7 Electrical requirements In addition to the electrical requirements
44、 in IEC 62052-11, meters shall fulfil the following requirements. 7.1 Power consumption The power consumption in the voltage and current circuits shall be determined at reference conditions given in 8.5 by any suitable method. The overall maximum error of the measure- ment of the power consumption s
45、hall not exceed 5 %. The active and apparent power consumption taken at reference temperature and reference frequency, by each voltage circuit at reference voltage and by each current circuit at rated current, shall not exceed the values shown in Table 1. Table 1 Power consumption including the powe
46、r supply Power supply connected to the voltage circuits Power supply not connected to the voltage circuits Voltage circuit 2 W and 10 VA 0,5 VA Current circuit 1 VA 1 VA Auxiliary power supply 10 VA NOTE 1 In order to match voltage and current transformers to meters, the meter manufacturer should st
47、ate whether the burden is inductive or capacitive. NOTE 2 The above figures are mean values. Switching power supplies with peak power values in excess of these specified values are permitted, but it should be ensured that the rating of associated voltage transformers is adequate. NOTE 3 For multifun
48、ctional meters see IEC 62053-61. Page 6 EN 6205322:2003 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 04:48:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 7.2 Influence of short-time overcurrents Short-time overcurrents shall not damage the meter. The meter shall perform correctly when back
49、to its initial working condition and the variation of error at rated current and unity power factor shall not exceed 0,05 %. The test circuit shall be practically non-inductive and the test shall be performed for polyphase meters phase-by-phase. After the application of the short-time overcurrent with the voltage maintained at the terminals, the met