《BS-EN-61076-4-001-1997 IEC-61076-4-001-1996 QC-480301-1996.pdf》由会员分享，可在线阅读，更多相关《BS-EN-61076-4-001-1997 IEC-61076-4-001-1996 QC-480301-1996.pdf（70页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61076-4-001: 1997 IEC 1076-4-001: 1996 QC 480301: 1996Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications Part 4: Printed board connectors Section 001: Blank detail specification The European Standard EN 61076-4
2、-001:1996 has the status of a British Standard ICS 31.220.10 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61076-4-001:1997 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was pub
3、lished under the authority of the Standards Board and comes into effect on 15 May 1997 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference EPL/48/2 Announced in BSI Update March 1997 ISBN 0 580 27355 5 Committees responsible for this British Standard The
4、 preparation of this British Standard was entrusted by Technical Committee EPL/48, Electromechanical components for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, upon which the following bodies were represented: Association of Manufacturers Allied to the Electr
5、ical and Electronic Industry (BEAMA Ltd.) British Telecommunications plc BSI Quality Assurance Federation of the Electronics Industry Ministry of Defence Premises Cabling Association Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21
6、:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61076-4-001:1997 BSI 10-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 61076-4-0015 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:0
7、0 2006, Uncontrolled Copy, (c) BSI BS EN 61076-4-001:1997 ii BSI 10-1999 National foreword This Section of BS EN 61076 has been prepared by Subcommittee EPL/48/2, and is the English language version of EN 61076-4-001:1996 Connectors with assessed quality, for use in d.c., low-frequency analogue and
8、in digital high-speed data applications Part 4: Printed board connectors Section 001: Blank detail specification, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC 1076-4-001:1996, published by the International Electrotechnical Commission (
9、IEC). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referr
10、ed toCorresponding British Standard EN 60068-2-60:1996 (IEC 68-2-60:1995) BS EN 60068 Environmental testing- BS EN 60068-2-60:1996 Test Ke. Flowing mixed gas corrosion test BS EN 61076 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applicatio
11、ns EN 61076-1:1995 (IEC 1076-1:1995) BS EN 61076-1:1996 Generic specification EN 61076-4:1996 (IEC 1076-4:1995) BS EN 61076-4:1997 Sectional specification Printed board connectors Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages
12、2 to 64, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncon
13、trolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-4-001 November 1996 ICS 31.220.10 Descriptors: Printed board connectors with assessed quality, blank detail specification English version Connectors with assessed quality, for use in d.c., low-frequency analogue and in
14、digital high-speed data applications Part 4: Printed board connectors Section 001: Blank detail specification (IEC 1076-4-001:1996) Connecteurs sous assurance de la qualit, pour utilisation dans le cadre dapplications analogiques en courant continu et basse frquence et dans le cadre dapplications nu
15、mriques utilisant des dbits levs pour le transfert des donnes Partie 4: Connecteurs pour cartes imprimes Section 001: Spcification particulire cadre (CEI 1076-4-001:1996) Steckverbinder mit bewerteter Qualitt fr Gleichspannungs- und Niederfrequenzanwendungen sowie digitale Anwendungen mit hoher bert
16、ragungsrate Teil 4: Steckverbinder fr gedruckte Schaltungen Hauptabschnitt 001: Vordruck fr Bauartspezifikation (IEC 1076-4-001:1996) This European Standard was approved by CENELEC on 1996-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condit
17、ions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in thr
18、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnic
19、al committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechn
20、ique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No. EN 61076-4-001:1996 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076
21、-4-001:1996 BSI 10-1999 2 Foreword The text of document 48B/465/FDIS, future edition 1 of IEC 1076-4-001, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
22、CENELEC as EN 61076-4-001 on 1996-10-01. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex A, Annex B and Annex ZA are normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard I
23、EC 1076-4-001:1996 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 Introduction5 1General data7 1.1Recommended method of mounting7 1.1.1Number of contacts or contact cavities7 1.2Ratings and characteristics7 1.3Normative references8 1.4Marking8 1.5IEC
24、 type designation10 1.6Ordering information10 2Technical information12 2.1Definitions12 2.2Survey of styles and variants12 2.3Information on application12 2.3.1Complete connectors (pairs)12 2.3.2Fixed board connectors12 2.3.3Free board connectors12 2.3.4Accessories14 2.3.4.1Special contacts14 2.3.4.
25、2Coding devices14 2.3.4.3Mounting devices14 2.3.5Shielding/grounding14 2.3.6Basic type of terminations14 2.4Contact arrangements14 3Dimensional information16 3.1General16 3.2Isometric view and common features16 3.2.1Common features18 3.2.2Reference system18 3.2.3Height dimensions18 3.2.4Width dimens
26、ions18 3.2.5Depth dimensions18 3.3Engagement (mating) information20 3.3.1Electrical engagement length20 3.3.1.1Contact levels and sequencing20 3.3.2Perpendicular to the engaging (mating) direction20 3.3.3Inclination20 3.4Fixed board connectors20 3.4.1Dimensions20 3.4.2Terminations20 3.5Free board co
27、nnectors22 3.5.1Dimensions22 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1997-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 1997-07-01 Licensed Copy:
28、sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-4-001:1996 BSI 10-19993 Page 3.5.2Terminations22 3.6Accessories22 3.7Mounting information for fixed board connectors22 3.7.1Hole pattern on printed boards22 3.7.2Mounting on panels24 3.8Mounting info
29、rmation for free board connectors24 3.9Gauges24 3.9.1Sizing gauges and retention force gauges24 3.9.2Mechanical operation, engaging/separating force, insertion/withdrawal force gauges26 3.9.3Probes26 3.9.4Contact resistance gauge26 3.9.5Test panel (for voltage proof test)26 4Characteristics28 4.1Cli
30、matic category28 4.2Electrical28 4.2.1Creepage and clearance distances28 4.2.2Voltage proof28 4.2.3Current-carrying capacity30 4.2.4Contact resistance30 4.2.5Insulation resistance30 4.3Mechanical30 4.3.1Mechanical operation30 4.3.2Engaging and separating forces (or insertion and withdrawal forces)32
31、 4.3.3Contact retention in insert32 4.3.4Polarizing method32 5Test schedule34 5.1General34 5.1.1Arrangement for contact resistance measurements34 5.1.2Arrangement for dynamic stress tests34 5.1.3Arrangement for testing static load, axial34 5.1.4Wiring of specimens34 5.2Test schedules36 5.2.1Basic te
32、st schedule36 5.2.2Full test schedule38 5.2.2.1Test group P Preliminary38 5.2.2.2Test group AP Dynamic/climatic40 5.2.2.3Test group BP Mechanical endurance44 5.2.2.4Test group CP Moisture48 Page 5.2.2.5Test group DP Electrical load48 5.2.2.6Test group EP Mechanical resistivity50 5.2.2.7Test group FP
33、 Chemical resistivity52 5.2.2.8Test group GP Connections52 5.2.2.9Test group HP Additional52 6Quality assessment procedures54 6.1Qualification approval testing54 6.1.1Method 154 6.1.2Method 254 6.2Quality conformance inspection56 6.2.1Lot-by-lot tests56 6.2.2Periodic tests58 6.3Delayed delivery, re-
34、inspection60 Annex A (normative) Requirements for application to mechanical structures62 Annex B (normative) New tests and additional test phases63 Annex ZA (normative) Normative references to international publications with their corresponding European publications64 Figure A.1 Plug-in unit dimensi
35、ons63 Table 1 Styles and variants13 Table 2 Isometric view and common features17 Table 3 Performance levels28 Table 4 Creepage and clearance distances29 Table 5 Basic tests37 Table 6 Test group P39 Table 7 Test group AP41 Table 8 Test group BP45 Table 9 Test group CP49 Table 10 Test group DP49 Table
36、 11 Test group EP51 Table 12 Test group FP53 Table 13 Test group GP53 Table 14 Test group HP53 Table 15 Qualification approval tests55 Table 16 Lot-by-lot tests57 Table 17 Periodic tests59 Table 18 Re-inspection61 Table A.1 Dimensions required in accordance with IEC 917-2-262 Licensed Copy: sheffiel
37、dun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 4 blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-4-001:1996 BSI 10-19995 Introduction In prior years, IEC subcommittee 48B had prepared detai
38、l specifications as part of a two-level document system. When the IECQ system was introduced, SC48B was urged to consider changing to the four-level specification system as described in IEC Guide 102. This blank detail specification is part of that four-level document system. This blank detail speci
39、fication is a supplementary document to the sectional specification IEC 1076-4 and contains requirements for style, lay-out and minimum content of detail specifications. For the scope and definition of this blank detail specification, see 1.2.2 of IEC 1076-1 and 1.1 of IEC 1076-4. Detail specificati
40、ons not complying with these requirements shall not be considered as being in accordance with the IECQ system, nor shall they be so described. The complete requirements for the printed board connectors described herein should correspond to this blank detail specification and the current issues of IE
41、C 1076-1 and IEC 1076-4. In the preparation of detail specifications, the contents of 1.2.3 of IEC 1076-1 should be taken into account. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-4-001:1996 6 BSI 10-1999 Guidance notes The foll
42、owing pages give a recommended layout of a detail specification. The contents of this page give guidance on the information which should, wherever possible, be given on the first page of a detail specification (see IEC Guide 102). The numbers between brackets on the first page of the detail specific
43、ation correspond to the following information: Identification of the detail specification 1The International Electrotechnical Commission or the national standards organisation under whose authority the detail specification is drafted. 2The IEC or national standards number of the detail specification
44、, date of issue, and any further information required by the national system. 3The number and issue of the IEC or national generic specification. 4The number and issue of the IEC blank detail specification. Identification of the connector 5A short description of the type of connector. 6Information o
45、n typical construction of the connector; for example it should be stated whether the connector is suitable for mounting on printed boards. 7Outline drawing, preferably of isometric or similar projection, from which the connector may be clearly identified. 8Information on performance level(s) and ass
46、essment level(s) specified in the document. 9Reference data on the most important properties, to allow comparison between the various connector types. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-4-001:1996 BSI 10-19997 1 General
47、 data 1.1 Recommended method of mounting See Annex A for guide on the application of these connectors in mechanical structures according to IEC 917. 1.1.1 Number of contacts or contact cavities 1.2 Ratings and characteristics 1Detail specification number 2 Generic specification number Electronic com
48、ponents of assessed quality in accordance with: 3 Blank detail specification number 4 Outline drawing 7 Product description 5 6 8 Performance level(s): Assessment level(s): Combination of performance levels and assessment levels: 9 Information on the availability of components qualified to this deta
49、il specification is given in the qualified products list. Rated voltageCurrent rating at 70 C Insulation resistanceClimatic category Printed board thicknessContact spacing Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 02:21:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-4-001:1996 8 BSI 10-1999 Guidance notes 1.3 Normative references 1.4 Marking The marking of the connector and the package shall be in accordance with 2.6 of I