《BS-EN-ISO-13628-3-2001.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-13628-3-2001.pdf（80页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 13628-3:2001 Incorporating Corrigenda Nos. 1 and 2 Petroleum and natural gas industries Design and operation of subsea production systems Part 3: Through flowline (TFL) systems The European Standard EN ISO 13628:2000 has the status of a British Standard ICS 75.180.10 ? Lic
2、ensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 13628-3:2001 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes i
3、nto effect on 15 March 2001 BSI 21 February 2003 ISBN 0 580 36917 X National foreword This British Standard is the official English language version of EN ISO 13628-3:2000. It is identical with ISO 13628-3:2000. The UK participation in its preparation was entrusted to Technical Committee PSE/17, Pet
4、roleum and natural gas industries, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be fou
5、nd in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are resp
6、onsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep
7、the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to vi, pages 1 to 67, the Ann
8、ex ZA page, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 14033 Corrigendum No. 1 13 August 2002 replaced EN ISO foreword and incorporated the Annex ZA pa
9、ge 14378 Corrigendum No. 2 21 February 2003 Corrected EN ISO foreword page Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13628-3 December 2000 ICS 07.018.10 English version Petroleum
10、 and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000) Industries du ptrole et du gaz naturel - Conception et exploitation des systmes de production sous-marins - Partie 3: Systmes dinjection TFL (ISO 13628-3:2000)
11、This European Standard was approved by CEN on 7 December 2000. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref
12、erences concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member in
13、to its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sp
14、ain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2000 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national
15、 Members. Ref. No. EN ISO 13628-3:2000 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CORRECTED 2003-02-05 Foreword This document (ISO 13628-3:2000) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore str
16、uctures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum and natural gas industries“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national sta
17、ndard, either by publication of an identical text or by endorsement, at the latest by June 2001, and conflicting national standards shall be withdrawn at the latest by June 2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bo
18、und to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 13628-3:2000 has been approv
19、ed by CEN as EN ISO 13628-3:2000 without any modifications. NOTE Normative references to International Standards are listed in Annex ZA (normative). EN ISO 136283:2000 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 1362
20、8-3:2000(E) INTERNATIONAL STANDARD ISO 13628-3 First edition 2000-12-15 Petroleum and natural gas industries Design and operation of subsea production systems Part 3: Through flowline (TFL) systems Industries du ptrole et du gaz naturel Conception et exploitation des systmes de production sous-marin
21、s Partie 3: Systmes dinjection TFL EN ISO 136283:2000 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii EN ISO 136283:2000 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -82631
22、3:(0002E) iii ContentsPage Forewordv Introductionvi 1Scope 1 2Normative references1 3Terms, definitions and abbreviated terms 1 3.1Terms and definitions .2 3.2Abbreviated terms .3 4TFL system.4 4.1Description of system .4 4.2TFL components4 4.3System/equipment design5 4.4Pressure rating.6 5TFL surfa
23、ce equipment .6 5.1General6 5.2Service pump .9 5.3TFL control manifold.9 5.4TFL control console and instrumentation.9 5.5Lubricator.11 5.6Fluid storage and working tank13 5.7Separator13 5.8Testing13 6TFL piping system.13 6.1General13 6.2Design.14 6.3Fabrication20 6.4Testing26 7Subsea tree, tubing ha
24、nger, diverters and selectors.26 7.1Subsea tree design26 7.2Subsea tree testing35 7.3Tubing hanger design .35 7.4Tubing hanger testing.36 7.5Diverters, deflectors and selectors36 7.6Diverter design.42 7.7Diverter testing.43 8Completion equipment and tools.43 8.1General43 8.2Completion design.44 8.3T
25、ubing.44 8.4Surface-controlled subsurface safety system44 8.5Packers.45 8.6Telescoping joints .45 8.7Landing nipples .46 8.8Circulation members.46 8.9Circulation controls.47 8.10Standing valves and isolation/production devices47 8.11TFL tool design48 9Operations48 EN ISO 136283:2000 Licensed Copy: s
26、heffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -826313:(0002E) iv 9.1General48 9.2Personnel and training48 9.3Completion equipment49 9.4Satellite well and template well control systems49 9.5Service planning and documentation49 9.6Fluid selection/well p
27、reparation.50 9.7Pumping operations50 9.8Returning well to production51 10Summary of capabilities51 Annex A (normative) TFL pipe.52 A.1Technical delivery conditions.52 A.2Dimension and grades 52 A.3Length.52 A.4Drift tests 52 A.5Hydrostatic tests52 A.6Marking .52 Annex B (informative) TFL operating
28、pressure53 B.1General53 B.2Example problem.53 Annex C (informative) TFL completions .58 C.1General58 C.2Single string, single zone, annular circulation completion.58 C.3Single string, single zone, side string circulation completion60 C.4Dual-string, single-zone completion62 C.5Dual-string, multi-zon
29、e completions62 Annex D (informative) TFL capabilities.65 D.1Flow controls65 D.2Service work.65 Bibliography67 EN ISO 136283:2000 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -826313:(0002E) v Foreword ISO (the International Organizat
30、ion for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established h
31、as the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Int
32、ernational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the
33、member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 13628 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 13628-3 was prepared by Technical C
34、ommittee ISO/TC 67, Materials, equipment and offshore structures for petroleum and natural gas industries, Subcommittee SC 4, Drilling and production equipment. ISO 13628 consists of the following parts, with the general title Petroleum and natural gas industries Design and operation of subsea produ
35、ction systems: ?Part 1: General requirements and recommendations ?Part 2: Flexible pipe systems for subsea and marine applications ?Part 3: Through flowline (TFL) systems ?Part 4: Subsea wellhead and tree equipment ?Part 5: Subsea control umbilicals ?Part 6: Subsea production control systems ?Part 7
36、: Workover/completion riser systems ?Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems ?Part 9: Remotely Operated Tool (ROT) intervention systems Annex A forms a normative part of this part of ISO 13628. Annexes B, C and D are for information only. EN ISO 136283:2000 Li
37、censed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -826313:(0002E) vi Introduction This part of ISO 13628 is based on API RP 17C:1991 5. The TFL systems and tools described herein permit both horizontal transport and vertical entry into the w
38、ellbore. Users of this part of ISO 13628 should be aware that further or differing requirements may be needed for individual applications. This part of ISO 13628 is not intended to inhibit a vendor from offering, or the purchaser from accepting, alternative equipment or engineering solutions for the
39、 individual application. This may be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the vendor should identify any variations from this part of ISO 13628 and provide details. EN ISO 136283:2000 Licensed Copy: sheffieldun sheffieldun, na,
40、Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTENRATIONAL TSANDADRISO -826313:(0002E) 1 Petroleum and natural gas industries Design and operation of subsea production systems Part 3: Through flowline (TFL) systems 1Scope This part of ISO 13628 specifies requirements and gives reco
41、mmendations for the design, fabrication and operation of TFL equipment and systems. The procedures and requirements presented are for the hydraulic servicing of downhole equipment, subsea tree and tubing hanger, and flowlines and equipment within the flowlines. This part of ISO 13628 primarily addre
42、sses TFL systems for offshore, subsea applications but it may also be used in other applications such as highly-deviated wells or horizontally-drilled wells. Subsea separation, boosting, metering and downhole pumps are outside the scope of this part of ISO 13628. 2Normative references The following
43、normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 13628. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 13628 are e
44、ncouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. IS
45、O 3183-1, Petroleum and natural gas industries Steel pipe for pipelines Technical delivery conditions Part 1: Pipes of requirement class A. ISO 11960, Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells. ISO 13628-4:1999, Petroleum and natural gas industries Design
46、 and operation of subsea production systems Part 4: Subsea wellhead and tree equipment. API RP 14E, Design and Installation of Offshore Production Platform Piping Systems. API Std 1104, Welding of Pipelines and Related Facilities. 3Terms, definitions and abbreviated terms For the purposes of this pa
47、rt of ISO 13628, the following terms, definitions and abbreviated terms apply. EN ISO 136283:2000 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:49:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -826313:(0002E) 2 3.1Terms and definitions 3.1.1 bend radius radius of curvature as measure
48、d to the centreline of a conduit 3.1.2 circulation control valve valve normally placed across the circulation point to allow isolation of the tubing strings or tubing/casing during production 3.1.3 circulation point location where communication is established between supply and return fluids for TFL
49、 servicing 3.1.4 diverter device used to direct tools at a branch connection NOTEUsed generically, it refers to that category of equipment which includes deflectors, diverters and selectors. 3.1.5 drift gauge used to check the minimum radius of curvature and minimum ID of loops, flowline and nipples 3.1.6 H-member nipple assembly that provides fluid communication and circulation between strings of tubing in the wellbore 3.1.7 loop curved section of pipe allowing change