《BS-EN-ISO-13533-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-13533-2002.pdf（118页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 13533:2002 Incorporating Corrigenda Nos. 1 and 2 Petroleum and natural gas industries Drilling and production equipment Drill-through equipment The European Standard EN ISO 13533:2001 has the status of a British Standard ICS 75.180.10 ? Licensed Copy: sheffieldun sheffield
2、un, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 13533:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 1 M
3、arch 2002 National foreword This British Standard is the official English language version of EN13533:2001, including Corrigendum March 2006. It is identical with ISO 13533:2001, including Corrigendum January 2005. The UK participation in its preparation was entrusted by Technical Committee PSE/17,
4、Materials and equipment for petroleum and natural gas industries, to Subcommittee PSE/17/-/4, Drilling and production equipment for petroleum and natural gas industries, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secret
5、ary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalog
6、ue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the
7、 text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front
8、 cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to vi, pages 1 to 106, the Annex ZA page and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication
9、 Amd. No.DateComments 14176 Corrigendum No. 1 17 October 2002 Correction to EN ISO foreword page and addition of the Annex ZA page 16372 Corrigendum No. 2 August 2006Replaced Figure 6, Corrected Tables 8, 12, 16, 18 ISBN 0 580 39041 1 BSI August 2006 Licensed Copy: sheffieldun sheffieldun, na, Sun N
10、ov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13533 December 2001 ICS 75.180.10 Incorporating Corrigendum January 2005 English version Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipme
11、nt (ISO 13533:2001) Industries du ptrole et du gaz naturel - Equipements de forage et de production - Equipements travers lesquels seffectue le forage (ISO 13533:2001) This European Standard was approved by CEN on 17 November 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regula
12、tions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This Europ
13、ean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the nationa
14、l standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMI
15、TEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13533:2001 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled
16、 Copy, (c) BSI CORRECTED 2002-09-25 Foreword This document (EN ISO 13533:2001) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offs
17、hore structures for petroleum and natural gas industries“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2002, and conflicting national standards
18、shall be withdrawn at the latest by June 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Irela
19、nd, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 13533:2001/Cor.1:2005 has been approved by CEN as a European Corrigendum without any modifications. NOTE Normative references to International Standards are lis
20、ted in Annex ZA (normative). EN ISO 13533:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 13533:2001(E) OSI1002 INTERNATIONAL STANDARD ISO 13533 First edition 2001-12-01 Petroleum and natural gas industries Drilling
21、 and production equipment Drill- through equipment Industries du ptrole et du gas naturel quipements de forage et de production quipements travers lesquels seffectue le forage EN ISO 13533:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
22、 ii EN ISO 13533:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iii Contents Page Forewordv Introductionvi 1Scope1 2Normative references4 3Terms and definitions .5 4Abbreviated terms.12 5Design requirements.13 5.1Size designation 13 5.
23、2Service conditions.13 5.3Equipment-specific design requirements.14 5.4Design methods.31 5.5Design verification testing33 5.6Documentation.33 5.7Tests for BOP and hydraulic connector operational characteristics.34 5.8Design temperature verification testing for non-metallic sealing materials and moul
24、ded sealing assemblies38 5.9Operating manual requirements 39 6Material requirements .40 6.1General40 6.2Written specifications .40 6.3Pressure-containing members.41 7Welding requirements.47 7.1General47 7.2Weldment design and configuration .47 7.3Welding controls51 7.4Welding procedure and performan
25、ce qualifications .52 7.5Other requirements .53 8Quality control requirements .56 8.1General56 8.2Measuring and testing equipment.57 8.3Quality control personnel qualifications.57 8.4Quality control requirements for equipment and parts.57 8.5Quality control requirements for specific equipment and pa
26、rts 58 8.6Requirements for quality control records.70 9Marking requirements.72 9.1General72 9.2Types of identification stamping .72 9.3Specific codification requirements of equipment72 9.4Product description code (PDC) 75 10Storing and shipping.77 10.1Storing for periods greater than 30 days77 10.2S
27、hipping77 Annex A (normative) Qualification of heat-treating equipment78 Annex B (normative) Requirements for repair and remanufacture81 Annex C (informative) Operational characteristics test procedure .86 EN ISO 13533:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 20
28、06, Uncontrolled Copy, (c) BSI iv Annex D (informative) Procedure for design temperature verification testing.94 Annex E (informative) Purchasing guidelines98 Annex F (informative) Failure reporting100 Annex G (informative) Conversion of US Customary units to the SI system (metric) .101 Annex H (inf
29、ormative) List of national/regional standards applicable in context.105 Bibliography106 EN ISO 13533:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI v Foreword ISO (the International Organization for Standardization) is a worldwide fede
30、ration of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that commi
31、ttee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordan
32、ce with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires
33、approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 13533 was prepared b
34、y Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum and natural gas industries, Subcommittee SC 4, Drilling and production equipment. Annexes A and B form a normative part of this International Standard. Annexes C, D, E, F, G and H are for information only. EN
35、 ISO 13533:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI vi Introduction This International Standard is based on API Specification 16A, second edition, 1 June 1998. This International Standard is intended to provide for the availabili
36、ty of safe and functionally interchangeable drill- through equipment utilized in the petroleum and natural gas industry. Users of this International Standard should be aware that further or differing requirements may be needed for individual applications. This International Standard is not intended
37、to inhibit a vendor from offering, or the purchaser from accepting, alternative equipment or engineering solutions for the individual application. This may be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the vendor should identify any v
38、ariations from this International Standard and provide details. For the convenience of users of this International Standard, annex H provides a list of those normative International Standards cited in clause 2 with national or regional standards which have been found mutually applicable in the conte
39、xt of the requirements in the text. The user may optionally apply the national or regional standard in the context of the requirement for which the International Standard is cited. EN ISO 13533:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c
40、) BSI Petroleum and natural gas industries Drilling and production equipment Drill-through equipment 1 Scope This International Standard specifies requirements for performance, design, materials, testing and inspection, welding, marking, handling, storing and shipping of drill-through equipment used
41、 for drilling for oil and gas. It also defines service conditions in terms of pressure, temperature and wellbore fluids for which the equipment will be designed. This International Standard is applicable to and establishes requirements for the following specific equipment: a) ram blowout preventers;
42、 b) ram blocks, packers and top seals; c) annular blowout preventers; d) annular packing units; e) hydraulic connectors; f) drilling spools; g) adapters; h) loose connections; i) clamps. Dimensional interchangeability is limited to end and outlet connections. Typical equipment defined by this Intern
43、ational Standard is shown in Figures 1 and 2; recommendations for failure reporting are outlined in annex F. This International Standard does not apply to field use or field testing of drill-through equipment. EN ISO 13533:2002 1 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00
44、:00 2006, Uncontrolled Copy, (c) BSI Key 1 Ring gaskets ISO 10423 2 Annular BOP 3 Clamp 4 Ram BOP 5 Drilling spool 6 Valve ISO 10423 7 Wellhead 8 Casing 9 End and outlet connections 10 Drill-through equipment ISO 13533 11 Wellhead equipment ISO 10423 Figure 1 Typical surface drill-through equipment
45、EN ISO 13533:2002 2 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Key 1 Riser connector 2 Flex/ball joint 3 Annular BOP 4 Hydraulic connector 5 Adapter 6 Ram BOP 7 Valve ISO 10423 8 Hydraulic connector 9 Wellhead 10 Riser equipment 11 Dril
46、l-through equipment ISO 13533 12 Wellhead equipment ISO 10423 Figure 2 Typical subsea drill-through equipment EN ISO 13533:2002 3 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 Normative references The following normative documents contai
47、n provisions, which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to in
48、vestigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 2859-1:1989,
49、Sampling procedures for inspection by attributes Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection ISO 6506-1, Metallic materials Brinell hardness test Part 1: Test method ISO 6507-1, Metallic materials Vickers hardness test Part 1: Test method ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) ISO 6892, Metallic mater