《BS-EN-700-1995.pdf》由会员分享，可在线阅读，更多相关《BS-EN-700-1995.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 700: 1995 Fibre ropes for general service Polyethylene The European Standard EN 700:1995 has the status of a British Standard ICS:59.080.50 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 700:1995 This British St
2、andard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 November 1995 BSI 03-1999 The following BSI references relate to the work on this standard: Committee reference TCI/6
3、8 Draft for comment 92/40334 DC ISBN 0 580 24649 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/68, Industrial textiles, upon which the following bodies were represented: Anglo-Scottish Fish Producers Organization
4、Limited British Apparel and Textile Confederation British Marine Equipment Council British Paediatric Association British Polyolefin Textiles Association Camping and Caravanning Club Limited Camping and Outdoor Leisure Association Confederation of British Wool Textiles Limited Consumer Policy Commit
5、tee of BSI Department of Trade and Industry Federation of Wire Rope Manufacturers of Great Britain Home Office Institute of Standards Administration Institution of Fire Engineers Made-up Textiles Association National Federation of Master Steeplejacks and Lighting Conductor Engineers Oldham and Rochd
6、ale Textile Employers Association Road Haulage Association Limited SATRA Footwear Technology Centre Scottish Office (Agriculture and Fisheries Department) Textile Finishers Association The following body was also represented in the drafting of the standard through a subcommittee and working group: A
7、ssociation of Load Restraint Equipment Manufacturers Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 700:1995 BSI 03-1999i Contents Page Committees responsibleInside front cover
8、National forewordii Foreword2 Text of EN 7003 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 700:1995 ii BSI 03-1999 National foreword This British Standard has been prepared by Technical Committee
9、TCI/68 and is the English language version of EN 700:1995 Fibre ropes for general service Polyethylene, published by the European Committee for Standardization (CEN). This British Standard partly supersedes BS 4928:1985 which is withdrawn. A British Standard does not purport to include all the neces
10、sary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding British Standard EN 701:1995BS EN 701:1995 Fibr
11、e ropes for general service General specification EN 919:1995BS EN 919:1995 Fibre ropes for general service Determination of certain physical and mechanical properties Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6, an i
12、nside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy,
13、 (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 700 August 1995 ICS 59.080.50 Descriptors: Textiles, cordages, specifications, textile fibres, natural fibres, synthetic fibres, manufacturing, characeristics, rope pitch, marking, labelling, delivery English version Fibre ropes for gener
14、al service Polyethylene Cordages en fibres pour usages divers Polythylne Faserseile fr allgemeine Verwendung Polyethylen This European Standard was approved by CEN on 19950702. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu
15、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (Engli
16、sh, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Fi
17、nland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050
18、Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 700:1995 E Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 700:1995 2 BSI 03-1999 Forewo
19、rd This European standard has been prepared by Technical Committee CEN/TC 248, Textiles and textile products, of which the secretariat is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest
20、by February 1996, and conflicting national standard shall be withdrawn at the latest by February 1996. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, Frnace, Germany, Greece, Iceland, Irela
21、nd, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. This standard is based on ISO 1969 Ropes Polyethylene Specification. Contents Page Foreword2 1Scope3 2Normative references3 3Definitions3 4Designation3 5Construction3 6Marking3 Figure 1 Shape of
22、a 3-strand hawser-laid rope (type A)3 Figure 2 Shape of a 4-strand shroud-laid rope(type B)4 Table 1 3-strand hawser-laid polyethylene ropes (type A)4 Table 2 4-strand shroud-laid polyethylene ropes (type B)5 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolle
23、d Copy, (c) BSI EN 700:1995 BSI 03-19993 1 Scope This European standard specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes for general service made of polyethylene and gives rules for their designation. 2 Normative references This European Standard incorporates by dated o
24、r undated references, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard onl
25、y when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 701:1995, Fibre ropes for general service General specification. EN 919, Fibre ropes for general service Determination of certain physical and mechanical propertie
26、s. ISO 1968, Ropes and cordage Vocabulary. 3 Definitions For the purposes of this standard, the definitions given in ISO 1968 apply. 4 Designation Fibre ropes shall be designated by: the words “fibre rope”; the number of this European Standard; the construction or type of rope (see clause 5); the re
27、ference number of the rope; the material from which the rope is made. NOTEThe material from which the rope is made may be indicated either by its full name “polyethylene” or by means of its abbreviation “PE”. Example: Designation of a 4-strand shroud-laid rope with a linear mass of 706 ktex correspo
28、nding to reference number 40 made of polyethylene: Fibre rope EN 700-B-40-polyethylene. 5 Construction Polyethylene ropes produced to this European Standard shall be made in one of the following constructions: type A: 3-strand hawser-laid rope (see Figure 1); type B: 4-strand shroud-laid rope (see F
29、igure 2). Linear density and minimum breaking force shall conform to Table 1, and Table 2 (see also Table 1 and Table 2 of EN 701:1995). Construction, manufacture, lay, labelling, packaging, invoicing and delivery lengths, shall conform to EN 701. 6 Marking The marking shall be carried out in accord
30、ance with clause 7 of EN 701:1995. Figure 1 Shape of a 3-strand hawser-laid rope (type A) Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 700:1995 4 BSI 03-1999 Table 1 3-strand hawser-laid polyethylene ropes (type A) Reference numbera Li
31、near densitybcMinimum breaking force NominalTolerance ktexdaN 48196 618 10 %392 833686 10491 070 1272 8 %1 510 14952 050 161282 750 181613 400 202004 190 222434 980 242955 980 263286 800 283938 050 304609 300 3252510 500 3666013 200 40785 5 %16 000 4495019 250 481 15022 400 521 35025 900 561 57029 8
32、00 601 80033 800 642 05038 300 722 59048 100 803 21059 200 883 88071 100 964 61083 800 a The reference number corresponds to the approximate diameter in millimetres. b The linear density (in kilotex) corresponds to the net mass per length (in grams per metre) or to the mass of rope per length (in ki
33、lograms per thousand metres). c The linear density is measured under tensile loading for measurement FC as given in EN 919. Figure 2 Shape of a 4-strand shroud-laid rope (type B) Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 700:1995 BS
34、I 03-19995 Table 2 4-strand shroud-laid polyethylene ropes (type B) Reference numbera Linear densitybcMinimum breaking force nominaltolerance ktexdaN 104463 1265 8 %1 360 14861 840 161152 480 181453 060 201803 770 222194 480 242665 380 262956 120 283547 240 304148 370 324729 450 3659411 900 40706 5
35、%14 400 4485517 300 481 04020 200 521 22023 300 561 41026 800 601 62030 400 641 84034 500 722 33043 300 802 89053 300 883 49064 000 964 15075 400 a The reference number corresponds to the approximate diameter in millimetres. b The linear density (in kilotex) corresponds to the net mass per length (i
36、n grams per metre) or to the mass of rope per length (in kilograms per thousand metres). c The linear density is measured under tensile loading for measurement FC as given in EN 919. Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 6 blank Li
37、censed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 700:1995 BSI 03-1999 List of references See national foreword. Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 389 Chiswick Hi
38、gh Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards In
39、stitution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards
40、 should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical co
41、mmittee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for
42、all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unl
43、ess otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its p
44、roducts and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Ad
45、ministration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may b
46、e reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and
47、 size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 05:42:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI