《BS-EN-ISO-1483-1995.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-1483-1995.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 1483:1995 Slotted raised countersunk (oval) head tapping screws (common head style) The European Standard EN ISO 1483:1994 has the status of a British Standard UDC 621.882.215.082.8 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006, Uncontrolle
2、d Copy, (c) BSI BS EN ISO 1483:1995 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 January 1995 BSI 07-1999 The following BSI references relate to the work on this s
3、tandard: Committee reference GME/9 Draft for comment 82/70257 DC ISBN 0 580 23702 8 Cooperating organizations The European Committee for Standardization (CEN), under whose supervision this European Standard was prepared, comprises the national standards organizations of the following countries: Aust
4、riaOesterreichisches Normungsinstitut BelgiumInstitut belge de normalisation DenmarkDansk Standard FinlandSuomen Standardisoimisliito, r.y. FranceAssociation franaise de normalisation GermanyDeutsches Institut fr Normung e.V. GreeceHellenic Organization for Standardization IcelandTechnological Insti
5、tute of Iceland IrelandNational Standards Authority of Ireland ItalyEnte Nazionale Italiano di Unificazione LuxembourgInspection du Travail et des Mines NetherlandsNederlands Normalisatie-instituut NorwayNorges Standardiseringsforbund PortugalInstituto Portugus da Qualidade SpainAsociacin Espaola de
6、 Normalizacin y Certificacin SwedenStandardiseringskommissionen i Sverige SwitzerlandAssociation suisse de normalisation United KingdomBritish Standards Institution Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006
7、, Uncontrolled Copy, (c) BSI BS EN ISO 1483:1995 BSI 07-1999i Contents Page Cooperating organizationsInside front cover National forewordii Foreword2 Text of EN ISO 14833 National annex NA (informative) Committees responsibleInside back cover National annex NB (informative) Cross-referencesInside ba
8、ck cover Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 1483:1995 ii BSI 07-1999 National foreword This British Standard has been prepared under the direction of the Engineering Sector Board and is the English language version of
9、EN ISO 1483:1994 Slotted raised countersunk (oval) head tapping screws (common head style), published by the European Committee for Standardization (CEN). It is identical with ISO 1483:1983, published by the International Organization for Standardization (ISO). EN ISO 1483:1994 was produced as a res
10、ult of international discussions in which the United Kingdom took an active part. The References clause of EN ISO 1483 states that the International Standards ISO 3269 and ISO 4042 are at the stage of draft. These were subsequently published as follows: A British Standard does not purport to include
11、 all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. ISO 3269:1988,Fasteners Acceptance inspection. ISO 4042:1989,Threaded components Electr
12、oplated coatings. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indi
13、cated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1483 July 1994 UDC 621.882.215.082.8 Descriptors: Fasteners, screws, slotted hea
14、d screws, countersunk head screws, dimensions, designation English version Slotted raised countersunk (oval) head tapping screws (common head style) (ISO 1483:1983) Vis tle tte fraise bombe, fendue (ISO 1483:1983) Linsensenk-Blechschrauben mit Schlitz (Einheitskopf) (ISO 1483:1983) This European Sta
15、ndard was approved by CEN on 1994-06-20. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning suc
16、h national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language
17、and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and Unite
18、d Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1994 Copyright reserved to CEN members Ref. No. EN ISO 1483:1994 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25
19、:29 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 1483:1994 BSI 07-1999 2 Foreword This European Standard has been taken over by the Technical Committee CEN/TC 185, Threaded and non-threaded mechanical fasteners and accessories, from the work of ISO/TC2, Fasteners, of the International Organizat
20、ion for Standardization (ISO). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 1995, and conflicting national standards shall be withdrawn at the latest by January 1995. According to the C
21、EN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. NOTENormative refere
22、nces to international publications are listed in Annex ZA (normative). Contents Page Foreword2 1Scope and field of application3 2References3 3Dimensions4 4Specifications and reference International Standards5 5Designation5 Annex ZA (normative) Normative references to international publications with
23、their relevant European publications6 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 1483:1994 BSI 07-19993 1 Scope and field of application This International Standard specifies the characteristics of slotted raised countersunk (ova
24、l) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive. 2 References ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and designations of dimensions. ISO 1478, Tapping screws thread. ISO 2702, Heat-treated steel tapping screws Mechanical properties. ISO 3269, Fasteners Acce
25、ptance inspection1). ISO 4042, Threaded components Electroplated coatings components1). ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws and nuts with thread diameters W 1,6 and u 150 mm and product grades A, B and C. ISO 7721, Countersunk head screws Head configurations and gauging. 1) At
26、 present at the stage of draft Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 1483:1994 4 BSI 07-1999 3 Dimensions Dimensions in millimetres Thread sizeST 2,2ST 2,9ST 3,5ST 4,2ST 4,8ST 5,5ST 6,3ST 8ST 9,5 Pa0,81,11,31,41,61,81,82,12,
27、1 abmax. 0,81,11,31,41,61,81,82,12,1 theoreticalcmax. 4,46,38,29,410,411,512,617,320 dk actual max. 3,85,57,38,49,310,311,315,818,3 min. 3,55,26,988,99,910,915,417,8 f. 0,50,70,811,21,31,422,3 kmax. 1,11,72,352,62,833,154,655,25 nom. 0,50,811,21,21,61,622,5 nmin. 0,560,861,061,261,261,661,662,062,56
28、 max. 0,711,21,511,511,911,912,312,81 rmax. 0,81,21,41,622,22,43,24 rf. 468,59,59,5111216,519,5 t min. 0,81,21,41,622,22,43,23,8 max. 11,451,71,92,42,62,83,74,4 y ref.d Type C 22,63,23,74,3567,58 Type F 1,62,12,52,83,23,63,64,24,2 le Type CType F nom.min.max.min.max. 4,53,75,33,74,5 6,55,77,35,76,5
29、9,58,710,38,79,5 1312,213,812,213 1615,216,815,216Range 1918,219,818,219of 2221,222,820,722commercial 2524,225,823,725lengths 3230,733,330,732 3836,739,336,738 4543,746,343,545 5048,751,348,550 a P = pitch of the thread. b Distance from the underside of the head to the first major diameter of the th
30、read within specified limits. c See ISO 7721. d Length of incomplete thread. e Sizes with lengths marked with a dash () in the table shall not be manufactured. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 1483:1994 BSI 07-19995 4 S
31、pecifications and reference International Standards 5 Designation Example for the designation of a slotted raised countersunk (oval) head tapping screw with thread size ST 3,5, nominal length l = 16 mm and cone end type C. Tapping screw ISO 1483 ST 3,5 16 C MaterialSteel, according to ISO 2702 Threa
32、dAccording to ISO 1478 Mechanical propertiesAccording to ISO 2702 TolerancesProduct gradeA International StandardISO 4759-1 FinishPlain Requirements for electroplating are covered in ISO 4042. If different electroplating requirements are desired or if requirements are needed for other finishes, they
33、 should be negotiated between customer and supplier. AcceptabilityFor acceptance procedure see ISO 3269. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 1483:1994 6 BSI 07-1999 Annex ZA (normative) Normative references to internationa
34、l publications with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references,
35、subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). PublicationYearTitleEN/HDYear ISO 2251983
36、Fasteners Bolts, screws, studs and nuts Symbols and designations of dimensions EN 202251991 ISO 14781983Tapping screw threadsEN ISO 14781994 ISO 77211983Countersunk head screws Head configuration and gaugingEN 277211991 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006,
37、Uncontrolled Copy, (c) BSI BS EN ISO 1483:1995 BSI 07-1999 National annex NA (informative) Committees responsible The United Kingdom participation in the preparation of this European Standard was entrusted by the Engineering Sector Board to Technical Committee GME/9, upon which the following bodies
38、were represented: BEAMA Ltd. British Constructional Steelwork Association Ltd. British Industrial Fasteners Federation British Steel Industry British Steel Industry (Wire Section) Gauge and Tool Makers Association National Association of Fastener Stockholders Society of Motor Manufacturers and Trade
39、rs Ltd. Washer Manufacturers Association of Great Britain The following bodies were also represented in the drafting of the standard, through subcommittees and panels: British Plastics Federation Portable Electric Tool Manufacturers Association Small Electrical Appliances Marketing Association Timbe
40、r Trade Federation National annex NB (informative) Cross-references Publication referred toCorresponding British Standard ISO 225:1983BS EN 20225:1992 Fasteners Bolts, screws, studs and nuts Symbols and designations of dimensions ISO 1478:1983BS EN ISO 1478:1995 Tapping screw threads ISO 2702:1992BS
41、 EN ISO 2702:1995 Heat treated steel tapping screws Mechanical properties ISO 4759-1:1978BS 6322 Tolerances for fasteners Part 1:1982 Specification for tolerances of bolts, screws and nuts with thread diameters U 1.6 mm and k 150 mm and product grades A, B and C ISO 7721:1983BS EN 27721:1992 Counter
42、sunk head screws Head configuration and gauging Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 07:25:29 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 1483:1995 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible f
43、or preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or
44、 editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on t
45、he inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications sh
46、ould be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provid
47、es a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 0
48、20 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyri
49、ght Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the s