《BS-EN-ISO-IEC-7812-1-1995.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-IEC-7812-1-1995.pdf（16页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO/IEC 7812-1:1995 Implementation of EN ISO/IEC 7812-1:1995 Identification cards Identification of issuers Part 1: Numbering system The European Standard EN ISO/IEC 7812-1:1995 has the status of a British Standard Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:1
2、1 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO/IEC 7812-1:1995 This British Standard, having been prepared under the direction of the Information Systems Technology Assembly, was published under the authority of the Standards Board and comes into effect on 15 August 1995 BSI 03-1999 The foll
3、owing BSI references relate to the work on this standard: Committee reference IST/17 Draft for comment 94/645105 DC ISBN 0 580 24366 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/17, Identification cards and relat
4、ed devices, upon which the following bodies were represented: Ailec Associates APACS (Barclaycard) APACS (Barclays Bank) APACS (Girobank) APACS (Lloyds Bank) APACS (Midland Bank) APACS (Nat West Bank) Association for Payment Clearing Services (APACS) BT Laboratories Cellnet Consumer Policy Committee
5、 of BSI Electricity Association GEC Card Technology HMSO News Datacom Ltd. Rochford Thompson Equipment Shell UK Thorn transit systems international Vodafone Ltd. Westinghouse Cubic Ltd. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05
6、:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO/IEC 7812-1:1995 BSI 03-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Foreword iii Text of EN ISO/IEC 7812-11 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncont
7、rolled Copy, (c) BSI BS EN ISO/IEC 7812-1:1995 ii BSI 03-1999 National foreword This British Standard is the English language version of EN ISO/IEC 7812-1:1995 and implements it as the UK national standard. This British Standard supersedes BS 7107:1990 which is withdrawn. This British Standard is pu
8、blished under the direction of the Information Systems Technology Assembly whose Technical Committee IST/17 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK intere
9、sts informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard does not purport to inclu
10、de all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages
11、i and ii, the EN title page, page 2, the ISO title page, pages ii to iv, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. License
12、d Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO/IEC 7812-1 February 1995 ICS 35.240.40Supersedes EN 27812:1989 (In conjunction with EN ISO/IEC 7812-2:1995) Descriptors: Data processing, data
13、storage devices, identification cards, identification methods, numbering, international identification number English version Identification cards Identification of issuers Part 1: Numbering system (ISO/IEC 7812-1:1993) Cartes didentification Identification des metteurs Partie 1: Systme de numration
14、 (ISO/IEC 7812-1:1993) Identifikationskarten Kennzeichnung eines Kartenausgebers Teil 1: Numerierungskarten (ISO/IEC 7812-1:1993) This European Standard was approved by CEN on 1995-01-11. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giv
15、ing this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official vers
16、ions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,
17、Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart
18、36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN ISO/IEC 7812-1:1995 E Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC
19、 7812-1:1995 BSI 03-1999 -4 Foreword This European Standard has been taken over by the Technical Committee CEN/TC 224, Machine-readable cards, related device interfaces and operations, from the work of the International Technical Committee ISO/IEC JTC 1, Information technology. This European Standar
20、d, in conjunction with EN ISO/IEC 7812-2:1995 supersedes EN 27812:1989. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 1995, and conflicting national standards shall be withdrawn at the la
21、test by August 1995. According to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, Unit
22、ed Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO/IEC 7812-1:1993 (E) ii BSI 03-1999 Contents Page Forewordiii 1Scope1 2
23、Normative references1 3Definitions1 4Numbering system2 4.1General2 4.2IIN2 4.3Individual account identification2 4.4Check digit2 Annex A (informative) National numbering systems for identification cards4 Annex B (normative) Luhn formula for computing modulus 10 “double-add-double” check digitInside
24、back cover Figure 1 Composition of the identification number on identification cards3 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO/IEC 7812-1:1993 (E) BSI 03-1999ii Foreword ISO (the International Organization for Standardization) and
25、 IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal wit
26、h particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC hav
27、e established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Internatio
28、nal Standard ISO/IEC 7812-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Identification cards and related devices. This third edition cancels and replaces the second edition (ISO 7812:1987), which has been technically revised. ISO/IEC 7812 cons
29、ists of the following parts, under the general title Identification cards Identification of issuers: Part 1: Numbering system; Part 2: Application and registration procedures. Annex B forms an integral part of this part of ISO/IEC 7812. Annex A is for information only. Licensed Copy: sheffieldun she
30、ffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO/IEC 7812-1:1993 (E) BSI 03-19991 Introduction This International Standard is one of a series of standar
31、ds describing the parameters for identification cards and the use of such cards for international interchange. 1 Scope This part of ISO/IEC 7812 specifies a numbering system for the identification of issuers of identification cards used in international interchange. 2 Normative references The follow
32、ing standards contain provisions which, through reference in this text, constitute provisions of ISO/IEC 7812. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO/IEC 7812 are encouraged to investig
33、ate the possibility of applying the most recent editions of the standards listed below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 3166:1988, Codes for the representation of names of countries. ISO 4909:1987, Bank cards Magnetic stripe data content for
34、track 3. ISO 7810:1985, Identification cards Physical characteristics. ISO 7811-3:1985, Identification cards Recording technique Part 3: Location of embossed characters on ID-1cards. ISO/IEC 7812-2:1993, Identification cards Identification of issuers Part 2: Application and registration procedures.
35、ISO 8583:1987, Bank card originated messages Interchange message specifications Content for financial transactions. International Telegraph and Telephone Consultative Committee (CCITT) Recommendation E.118. The international telecommunication charge card. 3 Definitions For the purposes of this part
36、of ISO/IEC 7812, the definitions given in ISO 7810 and the following definitions apply. 3.1 card issuer institution (or its agent) that issues the identification card to the cardholder 3.2 cardholder customer associated with the identification number 3.3 identification number the number that identif
37、ies the cardholder and card issuer NOTE 1Equivalent to Primary Account Number (PAN) as defined in ISO 4909. 3.4 individual account identification the number assigned by the card issuing institution for the purpose of identifying an individual account 3.5 interchange the exchange of (card originated/
38、activated) transaction data between two or more different entities/institutions based on an agreement between the participants 3.6 issuer identification number (IIN) the number that identifies the major industry and the card issuer and that forms the first part of the identification number 3.7 issue
39、r identifier together with the Major industry identifier the number that identifies the card issuing institution 3.8 major industry identifier (MII) the first digit of the IIN. It identifies the major industry of the card issuer 3.9 registration authority the Registration Authority is appointed by t
40、he ISO Council and is a qualified and internationally responsible organization. The Registration Authority is responsible for assigning IINs and maintaining the ISO register of card issuer identification numbers 3.10 registration management group (RMG) a group established by ISO/IEC JTC1/SC17 to act
41、 on its behalf in managing the administration of the register of card issuer identification numbers Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:26:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO/IEC 7812-1:1993 (E) 2 BSI 03-1999 4 Numbering system 4.1 General The identification numbe
42、r on an identification card, (the maximum length of which is defined in ISO 7811-3), is made up of two main components. These are: a) the IIN (see 4.2); and b) the individual account identification (see 4.3). (See Figure 1 for number format.) This International Standard is concerned primarily with t
43、he first of these components, the IIN. 4.2 IIN All Issuer Identification Numbers (IINs) issued in accordance with this part of ISO/IEC 7812 shall be applied for and registered as described in ISO/IEC 7812-2. The IIN is made up of 2 elements (see Figure 1) a) the MII (see 4.2.1); and b) the issuer id
44、entifier (see 4.2.6). Applicants whose applications fulfill the criteria for approval described in ISO/IEC 7812-2 will be assigned a six digit IIN or, in the case of a block assignment, a block of 6 digit IINs. 4.2.1 MII There are ten single-digit MIIs as follows: 0 for assignment by ISO/TC 68 and f
45、or other future industry assignments 1 airlines 2 airlines and other future industry assignments 3 travel and entertainment 4 banking/financial 5 banking/financial 6 merchandizing and banking 7 petroleum 8 telecommunications and other future industry assignments 9 for assignment by national standard
46、s bodies New industry assignments shall be approved by the RMG. The MII does not in any way reflect or limit the application in which the card is usable. Single digit MIIs are assigned using the applicants description of their main area of business on the application form (see Annex A of ISO/IEC 781
47、2-2). 4.2.2 Numbers beginning with “00” Ten thousand numbers in the range “00” have been allocated to ISO/TC 68 for assignment to institutions other than card issuers in order to accommodate requirements in ISO 8583. 4.2.3 Numbers beginning with “59” IINs beginning with “59” are issued by financial
48、institutions and not by the Registration Authority under ISO/IEC 7812. Numbers prefixed by “59” are used with, and identify the presence of, a national system of financial institution identification. They have no fixed length and do not appear on the ISO register of card issuer identification number
49、s. 4.2.4 Numbers beginning with “89” IINs beginning with “89” are used on cards issued by telecommunications administrations and recognized private operating agencies in accordance with CCITT Recommendation E.118. These IINs are maintained by the International Telecommunication Union. 4.2.5 Major Industry Identifier 9 (MII 9) MII 9 has been assigned to national standards bodies for national use; it shall be presented as the primary or first digit followed by the three digit numeric country code as sp