《BS-EN-ISO-9902-6-2001.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-9902-6-2001.pdf（26页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 9902-6:2001 Textile machinery Determination of noise emission Part 6: Fabric manufacturing machines The European Standard EN ISO 9902-6:2001 has the status of a British Standard ICS 17.140.20; 59.120.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
2、 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 06:40:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 9902-6:2001 This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Co
3、mmittee and comes into effect on 15 July 2001 BSI 07-2001 ISBN 0 580 37354 1 National foreword This British Standard is the official English language version of EN ISO 9902-6:2001. It is identical with ISO 9902-6:2001. This standard, together with BS EN ISO 9902-1 to -5 and -7, supersedes BS ISO 990
4、2:1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn t
5、o the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Cata
6、logue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their
7、correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests
8、 informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 14, the Annex ZA page (x2),
9、 the Annex ZB page, and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 06:40:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
10、EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9902-6 March 2001 ICS 17.140.20; 59.120.01 English version Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) Matriel pour lindustrie textile - Code dessai acoustique - Partie 6: Machines de producti
11、on des toffes (ISO 9902- 6:2001) Textilmaschinen - Geruschmessverfahren - Teil 6: Maschinen zur Herstellung textiler Flchengebilde (ISO 9902-6:2001) This European Standard was approved by CEN on 15 March 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
12、the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in
13、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of
14、Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Managem
15、ent Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9902-6:2001 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 06:40:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI gaPe 2
16、 I NESO 99-20:60021 Foreword The text of the International Standard ISO 9902-6:2001 has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering“ in collaboration with Technical Committee CEN/TC 214 “Textile machinery and machinery fo
17、r dry-cleaning and industrial laundry“, the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2001, and conflicting national standards shall be withdra
18、wn at the latest by September 2001. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which
19、 is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Ital
20、y, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 9902-6:2001 was approved by CEN as a European Standard without any modification. NOTE: Normative references to International Standards are li
21、sted in annex ZA (normative). Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. This first edition of ISO 9902-6, together with ISO 9902-
22、1, ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-7, cancels and replaces ISO 9902:1993, which has been technically revised. ISO 9902 consists of the following parts, under the general title Textile machinery - Noise test code: - Part 1: Common requirements - Part 2: Spinning preparator
23、y and spinning machinery - Part 3: Nonwoven machinery - Part 4: Yarn processing, cordage and rope manufacturing machinery - Part 5: Weaving and knitting preparatory machinery - Part 6: Fabric manufacturing machinery - Part 7: Dyeing and finishing machinery Annex ZA of this part of ISO 9902 is for in
24、formation only. EN ISO 99026:2001 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 06:40:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 9902-6:2001(E) INTERNATIONAL STANDARD ISO 9902-6 First edition 2001-03-15 Textile machinery Noise test code Part 6: Fabric manufacturing m
25、achinery Matriel pour lindustrie textile Code dessai acoustique Partie 6: Machines de production des toffes EN ISO 99026:2001 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 06:40:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -20996:(1002)E ii EN ISO 99026:2001 Licensed Copy: sheffieldun
26、sheffieldun, na, Sat Nov 18 06:40:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -20996:(1002)E iii ContentsPage Foreword.iv 1Scope 1 2Normative references1 3Terms and definitions .2 4Defining the test object.2 5Sound power level determination2 6Emission sound pressure level determination.3 7Inst
27、allation and mounting conditions6 8Operating conditions.6 9Measurement uncertainties6 10Information to be recorded.6 11Information to be reported6 12Declaration and verification of noise emission values6 Bibliography14 EN ISO 99026:2001 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 06:40:55
28、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -20996:(1002)E iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical
29、committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with
30、the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the me
31、mber bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 9902 may be the subject of patent rights. ISO shall not be held responsible for
32、 identifying any or all such patent rights. International Standard ISO 9902-6 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry-cleaning and industrial laundering, Subcommittee SC 8, Safety requirements for textile machinery. This first edition of ISO 9902-6, tog
33、ether with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-7, cancels and replaces ISO 9902:1993, which has been technically revised. ISO 9902 consists of the following parts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinn
34、ing preparatory and spinning machinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery EN ISO 99026:2001 Licensed Copy: sheffi
35、eldun sheffieldun, na, Sat Nov 18 06:40:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTENRATIONAL TSANDADRISO -20996:(1002)E 1 Textile machinery Noise test code Part 6: Fabric manufacturing machinery 1Scope This part of ISO 9902, taken together with ISO 9902-1, specifies the mounting, operating an
36、d measuring conditions required for the measurement, declaration and verification of noise emitted by fabric manufacturing machinery. It is applicable to engineering (grade 2) and survey (grade 3) methods, in accordance with the International Standards to which it makes normative reference. This par
37、t of ISO 9902 covers the different types of weaving and knitting machines defined in ISO 5247 and ISO 7839, respectively. It is applicable to full-width weaving machines with shuttles, with rigid, telescopic or flexible rapiers, with projectiles, and to those with weft insertion by hydraulic (waterj
38、et) or by pneumatic (airjet) nozzle. It is also applicable to narrow fabric weaving machines with weft insertion by shuttles or needles, to other weaving machines of the multi-phase and circular weaving types, and to Jacquard machines. This part of ISO 9902 is applicable to knitting machinery includ
39、ing circular knitting, flat bed knitting, warp knitting, Raschel, cotton (flat weft weaving) and stitch bonding machines. 2Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 9902. For dated refere
40、nces, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 9902 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references
41、, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 3743-1:1994, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverberant fiel
42、ds Part 1: Comparison method in hard-walled test rooms. ISO 3744:1994, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane. ISO 3746:1995, Acoustics Determination of sound power levels of noise so
43、urces using sound pressure Survey method using an enveloping measurement surface over a reflecting plane. ISO 3747:2000, Acoustics Determination of sound power levels of noise sources using sound pressure Comparison method in situ. ISO 5247:1983, Textile machinery and accessories Weaving machines Cl
44、assification and vocabulary. ISO 7839:1984, Textile machinery and accessories Knitting machines Classification and vocabulary. ISO 9614-1:1993, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points. 1002:62099 OSI NEEN ISO 99026:2
45、001 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 18 06:40:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO -20996:(1002)E 2 ISO 9614-2:1996, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning. ISO 9902-1:2001, Textile machiner
46、y Noise test code Part 1: Common requirements. ISO 11201:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane. ISO 11202:1995,
47、Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Survey method in situ. ISO 11203:1995, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work stat
48、ion and at other specified positions from the sound power level. ISO 11204:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Method requiring environmental corrections. 3Terms and definitions For
49、the purposes of this part of ISO 9902, the terms and definitions given in ISO 9902-1 apply. 4Defining the test object See Tables 1 to 3 of this part of ISO 9902 and clause 4 of ISO 9902-1:2001. 5Sound power level determination 5.1International Standards required for basic measurements 5.1.1General See 5.1 of ISO 9902-1:2001. 5.1.2Determination by measuring sound intensity Determination of the A-weighted sound power level, LWA, using sound intensity measurements shall be in accor