《BS-EN-ISO-9100-10-2005.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-9100-10-2005.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 9100-10:2005 Glass containers Vacuum lug finishes Part 10: 77 regular The European Standard EN ISO 9100-10:2005 has the status of a British Standard ICS 55.100 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS E
2、N ISO 9100-10:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 11 February 2005 BSI 11 February 2005 ISBN 0 580 45439 8 National foreword This British Standard is the official English language version of EN ISO 9100-10:2005. It is identic
3、al with ISO 9100-10:2005. The UK participation in its preparation was entrusted to Technical Committee PKW/0, Packaging, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which im
4、plement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication
5、does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/Euro
6、pean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page
7、, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontroll
8、ed Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9100-10 January 2005 ICS 55.100 English version Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005) Rcipients en verre - Bagues crans pour bouchage sous vide - Partie 10: 77 regular (ISO 9100-10:200
9、5) Glasbehlter - Vakuum-Nockenverschluss-Mndungen - Teil 10: 77 regular (ISO 9100-10:2005) This European Standard was approved by CEN on 23 September 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s
10、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German).
11、A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark,
12、 Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISC
13、HES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9100-10:2005: E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, U
14、ncontrolled Copy, (c) BSI EN ISO 9100-10:2005 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Dimensions.4 Bibliography8 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 9100-10:2005 (E) 3 Foreword This document (EN I
15、SO 9100-10:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 63 “Glass containers”. This European Standard shall be given the status of a national standard, either by publication of an id
16、entical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. Efficient packaging is of great importance for the distribution and the protection of goods. Insufficient or inappropriate packaging can lead to damage or was
17、tage of the contents of the pack. It is based on CE.T.I.E (International Technical Centre for Bottling and Packaging) 1 ) data sheet GME 20-08 : 1995. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe
18、an Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 1) Centre Techn
19、ique International de lEmbouteillage (CETIE), 3, rue La Botie, 75008 Paris, France, www.cetie.org Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 9100-10:2005 (E) 4 1 Scope This document specifies the dimensions of a vacuum lug finish
20、 with a nominal size of 77 mm regular for wide- mouth glass containers. 2 Normative references Not applicable. 3 Dimensions 3.1 The design and dimension of the finish shall be as shown in Figures 1 to 3 and Table 1. 3.2 Details which are not specified shall be selected in accordance with the applica
21、tion. For general tolerances see EN 22768-1. Dimensions in millimetres Figure 1 Cutter profile Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 9100-10:2005 (E) 5 Dimensions in millimetres Key a) Parting line b) See Figure 3 Figure 2 T
22、hread construction Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 9100-10:2005 (E) 6 Dimensions in millimetres Key a) The sealing surface shall be free of checks, dips, crizzles and other defects which may affect proper functioning.
23、b) Proper system functioning calls for keeping the ovality in the finish diameters to a minimum. E and T diameters should be concentric in relation to one another. c) Cross-hatched areas of C diameter and H height show the closure position. Glass shall clear cap limits shown. The contour below the H
24、 dimension as well as the design of a possible bead are optional. Sufficient free space shall be provided between the bead and the cross-hatched area. Figure 3 Enlarged view section A-A Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO
25、9100-10:2005 (E) 7 Table 1 Dimensions Thread parameters Thread parameters Type Diameter E (mm) Diameter T (mm) Diameter C (mm) Cutter a) Leads Pitch (mm) T.P.I.b) 1 Pitch (mm) T.P.I.b) 77 72,50 0,45 75,65 0,45 65,95 459 6 459 20,30 1 817 33,90 a) The cutter inclination at -angle shall be maintained
26、for all cuts. The start and end of the leads correspond to the cut-in profile as defined by the cutter diameter, except where riffles are required to permit mould opening. b) Threads per inch Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI E
27、N ISO 9100-10:2005 (E) 8 Bibliography EN 22768-1, General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI blank Licensed Cop
28、y: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 9100-10:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view o
29、n standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the q
30、uality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44
31、 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:
32、+44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless o
33、therwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its produc
34、ts and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefi
35、ts contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:
36、/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system
37、or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these
38、 details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:20:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI