《BS-EN-ISO-1140-2004.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-1140-2004.pdf（16页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 1140:2004 Fibre ropes Polyamide 3-, 4- and 8-strand ropes The European Standard EN ISO 1140:2004 has the status of a British Standard ICS 59.080.50 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 1140:2
2、004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 7 December 2004 BSI 7 December 2004 ISBN 0 580 44967 X National foreword This British Standard is the official English language version of EN ISO 1140:2004. It is identical with ISO 1140:200
3、4. It supersedes BS EN 696:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/77, Ropes and cordage and fishing nets, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secret
4、ary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalog
5、ue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the
6、 text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front
7、 cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publicatio
8、n Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1140 November 2004 ICS 59.080.50 Supersedes EN 696:1995 English version Fibre ropes - Polyamide - 3-, 4- and 8-s
9、trand ropes (ISO 1140:2004) Cordages en fibres - Polyamide - Cordages 3, 4 et 8 torons (ISO 1140:2004) Faserseile - Polyamid - 3-, 4- und 8-litzige Seile (ISO 1140:2004) This European Standard was approved by CEN on 4 November 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regul
10、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Eu
11、ropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the na
12、tional standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. E
13、UROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1140:2004: E Licens
14、ed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI NE ISO 411)E( 4002:0 2 Foreword This document (EN ISO 1140:2004) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products“, the secretariat of which is held by BSI, in colla
15、boration with Technical Committee ISO/TC 38 “Textiles“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. T
16、his document supersedes EN 696:1995. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary
17、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN ISO 1140:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Refer
18、ence number ISO 1140:2004(E) OSI 4002 INTERNATIONAL STANDARD ISO 1140 Third edition 2004-11-15 Fibre ropes Polyamide 3-, 4- and 8-strand ropes Cordages en fibres Polyamide Cordages 3, 4 et 8 torons EN ISO 1140:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncon
19、trolled Copy, (c) BSI IS:0411 O4002(E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign
20、tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file
21、 cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrtei
22、raat ta the serddaig sleb nevwo. ISO 4002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda
23、eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dna ii ISO 4002 Allr ithgsr esedevr EN ISO 1140:2004 Licensed Copy: shef
24、fieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:0411 O4002(E) I SO 4002 All irthgs ersedevr iii Contents Page Forewordiv 1 Scope1 2 Normative references .1 3 Terms and definitions.1 4 Designation1 5 General requirements.2 6 Physical properties.2 7 Marking.6
25、 EN ISO 1140:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:0411 O4002(E) iv I SO 4002 All irthgs ersedevr Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
26、 member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, gover
27、nmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC D
28、irectives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member
29、bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1140 was prepared by the European Committee for Standardization (CEN) Tech
30、nical Committee CEN/TC 248, Textiles and textile products, in collaboration with Technical Committee ISO/TC 38, Textiles, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This third edition cancels and replaces the second edition (ISO 1140:1990), whic
31、h has been technically revised. EN ISO 1140:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTENRATIONAL TSANDADR IS:0411 O4002(E) I SO 4002 All irthgs ersedevr 1 Fibre ropes Polyamide 3-, 4- and 8-strand ropes 1 Scope This Internation
32、al Standard specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes and 8-strand braided ropes for general service made of polyamide and gives rules for their designation. 2 Normative references The following referenced documents are indispensable for the application of this d
33、ocument. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1968, Fibre ropes and cordage Terms and definitions ISO 2307, Ropes Determination of certain physical and mechanical properties
34、 ISO 9554:1) , Fibre ropes General specification 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 1968 apply. 4 Designation Fibre ropes shall be designated by: the words “fibre rope”; the number of this International Standard; the construction type of
35、 rope (see Clause 5); the reference number of the rope; the material from which the rope is made; the mixing of polyamide fibre types and grades shall not be permitted; the type of stabilisation (1 or 2 in accordance with ISO 9554:1). Polyamide laid ropes that are required to have a heat setting on
36、the rope to ensure lay and dimensional stability are designated type 1 ropes; in other cases, polyamide laid ropes that are not required to have a heat setting on the rope are designated type 2 ropes. 1) To be published. (Revision of ISO 9554:1991) EN ISO 1140:2004 Licensed Copy: sheffieldun sheffie
37、ldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:0411 O4002(E) 2 I SO 4002 All irthgs ersedevr EXAMPLE Designation of a 3-strand hawser-laid rope heat set (type 1), reference number 20 (type A) corresponding to a linear density of 247 ktex made of polyamide (PA): Fibre rop
38、e ISO 1140 - A - 20 PA 1. 5 General requirements 5.1 Polyamide ropes shall be made in one of the following constructions: type A: 3-strand hawser-laid rope (see Figure 1); type B: 4-strand shroud-laid rope (see Figure 2); type L: 8-strand braided rope (see Figure 3). 5.2 Construction, manufacture, l
39、ay labelling, packaging, invoicing and delivery lengths shall conform to ISO 9554. 6 Physical properties Linear density and minimum breaking force shall conform to Tables 1, 2 and 3. EN ISO 1140:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (
40、c) BSI IS:0411 O4002(E) I SO 4002 All irthgs ersedevr 3 Figure 1 Shape of a 3-strand hawser-laid rope (type A) Figure 2 Shape of an 4-strand shroud-laid rope (type B) Figure 3 Shape of an 8-strand braided rope (type L) EN ISO 1140:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52
41、GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:0411 O4002(E) 4 I SO 4002 All irthgs ersedevr Table 1 Linear density and minimum breaking force of 3-strand hawser-laid polyamide ropes (type A) Linear density b, c Nominal Tolerance Minimum breaking force d, e, f Reference number a ktex % kN 4 9,87 3,70
42、 4,5 12,5 4,63 5 15,4 5,64 6 22,2 7,93 8 39,5 13,8 9 50,0 10 17,4 10 61,7 21,2 12 88,8 30,1 14 121 8 40,0 16 158 51,9 18 200 64,3 20 247 79,2 22 299 94,0 24 355 112 26 417 129 28 484 149 30 555 169 32 632 192 36 800 240 40 987 294 44 1 190 351 48 1 420 412 52 1 670 479 56 1 930 550 60 2 220 627 64 2
43、 530 709 72 3 200 887 80 3 950 1 080 88 4 780 1 300 96 5 690 1 530 104 6 670 1 780 112 7 740 2 050 120 8 880 2 340 128 10 100 2 650 136 11 400 2 980 144 12 800 3 320 160 15 800 5 4 060 a The reference number corresponds to the approximate diameter in millimetres. b The linear density (in kilotex) co
44、rresponds to the net mass per length of the rope, expressed in grams per metre or in kilograms per thousand metres. c The linear density is under reference tension and is measured as specified in ISO 2307. d The breaking forces quoted above relate to new dry ropes. In wet conditions, the breaking fo
45、rce will be lower. e Minimum values for the breaking force shall be reduced by 10 % in the case of a rope with eye-spliced terminations. f A force determined by the test methods as specified in ISO 2307 is not necessarily an accurate indication of the force at which that rope might break in other ci
46、rcumstances and situations. Type and quality of termination rate of force application, prior conditioning and previous force applications to the rope can significantly influence the breaking force. A rope bent around a post, capstan, pulley or sheave might break at a significantly lower force. A kno
47、t or other distortion in a rope might significantly reduce the breaking force. EN ISO 1140:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:37:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:0411 O4002(E) I SO 4002 All irthgs ersedevr 5 Table 2 Linear density and minimum breaking forc
48、e of 4-strand shroud-laid polyamide ropes (type B) Linear density b, c Nominal Tolerance Minimum breaking force d, e, f Reference number a ktex % kN 10 61,7 19,1 12 88,8 27,1 14 121 8 36,0 16 158 46,7 18 200 57,9 20 247 71,3 22 299 84,6 24 355 101 26 417 116 28 484 134 30 555 152 32 632 173 36 800 2
49、16 40 987 265 44 1 190 316 48 1 420 371 52 1 670 431 56 1 930 495 60 2 220 564 64 2 530 638 72 3 200 798 80 3 950 972 88 4 780 1 170 96 5 690 1 380 104 6 670 1 600 112 7 740 1 850 120 8 880 2 110 128 10 100 2 390 136 11 400 2 680 144 12 800 2 990 160 15 800 5 3 650 a The reference number corresponds to the approximate diameter in millimetres. b The linear density (in kilotex) correspo