《BS-ISO-11442-5-1999.pdf》由会员分享，可在线阅读，更多相关《BS-ISO-11442-5-1999.pdf（8页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 11442-5:1999 Technical product documentation Handling of computer-based technical information Part 5: Documentation in the conceptual design stage of the development phase ICS 01.110 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: London
2、South Bank University, London South Bank University, Thu Mar 01 06:25:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS ISO 11442-5:1999 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Sta
3、ndards Committee and comes into effect on 15 September 2001 BSI 07-2001 ISBN 0 580 38249 4 National foreword This British Standard reproduces verbatim ISO 11442-5:1999 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee TDW/4, E
4、ngineering drawing, metrology, precision measurement and all related documentation, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications re
5、ferred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of
6、a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the i
7、nterpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, page ii, pages 1 to 3 and a back cover
8、. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:25:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI A Refer
9、ence number ISO 11442-5:1999(E) INTERNATIONAL STANDARD ISO 11442-5 First edition 1999-12-01 Technical product documentation Handling of computer-based technical information Part 5: Documentation in the conceptual design stage of the development phase Documentation technique de produits Gestion des i
10、nformations techniques assiste par ordinateur Partie 5: Documentation au stade initial de la conception, dans la phase de dveloppement Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:25:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ISO 11442-5:1999(E) ii Fore
11、word ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a techn
12、ical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
13、electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requi
14、res approval by at least 75 % of the member bodies casting a vote. International Standard ISO 11441-5 was prepared by Technical Committee ISO/TC 10, Technical drawings, product definition and related documentation, Subcommittee SC 1, Basic conventions. ISO 11442 consists of the following parts, unde
15、r the general title Technical product documentation Handling of computer-based technical information: Part 1: Security requirements Part 2: Original documentation Part 3: Phases in the product design process Part 4: Document management and retrieval systems Part 5: Documentation in the conceptual de
16、sign stage of the development phase Part 6: Rules for revision Part 7: Structuring CAD files from an administrative point of view Part 8: Data fields for title blocks, item lists and revision blocks Part 9: Terminology Licensed Copy: London South Bank University, London South Bank University, Thu Ma
17、r 01 06:25:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI INTERNATIONAL STANDARD )E(9991:5-24411 OSI 1 Technical product documentation Handling of computer-based technical information Part 5: Documentation in the conceptual design stage of the development phase 1 Scope This part of ISO 11442 gives gu
18、idelines for establishing internal company rules for documentation during the conceptual design stage. These rules apply to manual as well as computer-based design work. 2 Normative references The following normative documents contain provisions which, through references in this text, constitute pro
19、visions of this part of ISO 11442. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 11442 are encouraged to investigate the possibility of applying the most recent editions of the normati
20、ve documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 11442-3:1993, Technical product documentation Handling of computer-based technical informa
21、tion Part 3: Phases in the product design process. ISO 11442-9:1), Technical product documentation Handling of computer-based technical information Part 9: Terminology. 3 Terms and definitions For the purposes of this part of ISO 11442, the terms and definitions given in ISO 11442-9 apply. 4 General
22、 The development phase (see ISO 11442-3) is the initial part of the product development process which results in technical documents for product definitions. See Figure 1. The development phase consists of the conceptual design stage and the final design stage. 1) To be published. DRADNATS LANOITANR
23、ETNI ISO 11442-5:1999(E) 1 desab-retupmoc fo gnildnaH noitatnemucod tcudorp lacinhceT noitamrofni lacinhcet :5 traP tnempoleved eht fo egats ngised lautpecnoc eht ni noitatnemucoD esahp epocS 1 Thsi rapt OSI fo vig 24411es senilediug rof sesilbatretni gnihc lanoynapm rusel rof codrud noitatnemueht g
24、ni .krow ngised desab-retupmoc sa llew sa launam ot ylppa selur esehT .egats ngised lautpecnoc evitamroN 2 secnerefer Teh ron gniwollofvitame codstnemu crp niatnovosisnoi cihwrht ,hr hguoerefcnese siht ni xetc ,tsnorp etutitvosisnoi siht fo rapOSI fo t F .24411or r detaderefcneses ,sbustnemdnema tne
25、uqe ,ot ro revisisno ,fo yna fo sehte cilbupsnoita ylppa ton od. vewoHer, rapseit rga otstnemee sabsiht no de rapt fo OSI 24411 rae cneruodega ot vniestsop eht etagisiytilib ylppa foisom eht gnr tecsnoitide tne eht fo ronvitame codstnemu cidniadet .woleb For detadnu rerefcnese, setal ehtt ron eht fo
26、 noitidevitamcod er tnemuerefrseilppa ot de. rebmeMs OSI fo CEI dna .sdradnatS lanoitanretnI dilav yltnerruc fo sretsiger niatniam OSI -24411,3991:3 Teccinhal rpcudocod tc fo gnildnaH noitatnemuretupmo-sabcet decinharofni l noitam .ssecorp ngised tcudorp eht ni sesahP :3 traP OSI -24411:91), Teccinh
27、arp lcudocod tc fo gnildnaH noitatnemuretupmo-sabcet decinharofni lm noita raPt :9 .ygolonimreT 3 snoitinifed dna smreT .ylppa 9-24411 OSI ni nevig snoitinifed dna smret eht ,24411 OSI fo trap siht fo sesoprup eht roF lareneG 4 Tved ehsahp tnempole( esOSI ee -24411)3 si rap laitini ehtrp eht fo tcud
28、oved trp tnempolecoses cihwr hesustl ni .1 erugiF eeS .snoitinifed tcudorp rof stnemucod lacinhcet .egats ngised lanif eht dna egats ngised lautpecnoc eht fo stsisnoc esahp tnempoleved ehT 1) .dehsilbup eb oT Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:25
29、:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ISO 11442-5:1999(E) 2 Since the solutions made in the conceptual design stage are the preconditions for the following activities, they should be documented. The documentation in the conceptual design stage is normally simplified compared with the docume
30、ntation in the following stages, where it is based on standards which render it unambiguous and rational. It is therefore preferable to use selected parts from these standards during the conceptual design stage. Figure 1 5 Documentation 5.1 General The documentation in the conceptual design stage ca
31、n be divided into: a) design specifications; b) design proposals. The first task is to establish a specification based on the compilation and evaluation of the requirements from the market, authorities and the company itself. Market-related requirements are for example the requirements for function,
32、 environments, service and price. The documentation of the market-related requirements shall ensure that the right product is produced at the right time. Authority-related requirements are for example requirements for approval, safety, or recycling. The documentation of the authority-related require
33、ments shall ensure that the product can be approved. Company-related requirements are for example the companys requirements for strategy, design, production processes and costs. The documentation of the company-related requirements shall ensure that the product complies with the standards of the com
34、pany, and be produced in a such a way that known and/or accepted manufacturing processes or methods are taken into account. Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:25:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ISO 11442-5:1999(E) 3 5.2 Design speci
35、fications Based on the specification of requirements, design specifications serve as a basis for further development. They may indicate possible functional solutions and/or shape representations, which will be the basis for the following proposals: Functional solutions Function and relationship betw
36、een parts are described as principle solutions, normally in the form of text and diagrams. Shape representations Physical form is normally presented as conceptual drawings or geometric models such as styling models. 5.3 Design proposals Design specifications are the basis for one or more design prop
37、osals to be evaluated. The result of the evaluation constitutes the basic material for design. 6 Handling of documents During the development phase, documents are under preparation and the formal handling of documents does not necessarily need to follow the procedures which apply to the final produc
38、t documentation. The extent of the document control shall be decided within the relevant company, project, etc. Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:25:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS ISO 11442-5:1999 BSI 389 Chiswick High Road Lon
39、don W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or r
40、evision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would infor
41、m the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of stan
42、dards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is
43、 BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters
44、 Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial dis
45、counts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI als
46、o holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, rec
47、ording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then t
48、he prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:25:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI