《BS-ISO-1754-1998.pdf》由会员分享，可在线阅读，更多相关《BS-ISO-1754-1998.pdf（6页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 1754:1998 Incorporating Technical Corrigendum No. 1 Photography Cameras using 35 mm film and roll film Picture sizes ICS 37.040.10 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 13:23:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1754:1998 This British Standa
2、rd, having been prepared under the direction of the Consumer Products and Services Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 December 1998 BSI 24 October 2003 ISBN 0 580 30772 7 National foreword This British Standard is the official E
3、nglish language version of ISO 1754:1998, including Technical Corrigendum March 2002. The UK participation in its preparation was entrusted to Technical Committee CPW/42, Photography, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/Euro
4、pean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. C
5、ross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or
6、of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document compri
7、ses a front cover, an inside front cover, the ISO title page, pages ii, page 1 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No.DateComments 14730 Technical Corrigendum No. 1 24 October 2003
8、Changes to Table 1 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 13:23:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1754:1998 Technical Corrigendum 1 2002-03-01 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 13:23:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1754:199
9、8 ii BSI 24 October 2003 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested i
10、n a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commis
11、sion (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Internatio
12、nal Standard ISO 1754 was prepared by Technical Committee ISO/TC 42, Photography. This fourth edition cancels and replaces the third edition (ISO 1754:1986), of which it constitutes a technical revision. It includes picture sizes transferred from Clause 3 of ISO 1203:1984. Descriptors: Photography,
13、photographic equipment, cameras, photographic film, photographic images, dimensions. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 13:23:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1754:1998 BSI 24 October 2003 1 1 Scope This International Standard specifies the image dimensions (o
14、n the film) of still pictures made with cameras in which the image dimensions are defined by the camera frame. This International Standard does not apply to stereo photography cameras (see ISO 515). Panoramic image dimensions (13 36) of cameras featuring a mid-roll panoramic photo are not specified
15、in this International Standard. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not a
16、pply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members o
17、f ISO and IEC maintain registers of currently valid International Standards. ISO 515:1973, Photography Stereo systems using 35 mm objectives on 35 mm film, five-perforation format Specifications. ISO 1203:1998, Photography Roll film cameras Back window location. 3 Dimensions The dimensions shown in
18、Figure 1 are given in Table 1. Table 1 Dimensions of picture sizes Figure 1 Picture sizes Nominal picture sizeFilm sizeDimension mm Tolerance on dimension Maximum corner radius, R ABmmmm 18 mm 24 mm 135 17 24 +0,8/0 0,4 24 mm 36 mm1352436 13 mm 36 mm13513,336,40,40,4 4,5 cm 6 cm 120 and 220 41,5 56,
19、0 1,00,8 6 cm 6 cm56,056,0 6 cm 7 cm56,069,0 6 cm 9 cm56,082,6 In the case of rectangular formats, A is the shorter dimension. In the case of cameras with interchangeable lenses, the picture size given in this table applies to the picture taken by the standard lens. Licensed Copy: sheffieldun sheffi
20、eldun, na, Sun Nov 26 13:23:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1754:1998 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and a
21、t the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and
22、services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offer
23、s members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +
24、44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Informa
25、tion on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact th
26、e Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Admin
27、istration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyri
28、ght subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form
29、or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for
30、 any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 13:23:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI