《BS-EN-ISO-IEC-7811-4-1996.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-IEC-7811-4-1996.pdf（14页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO/IEC 7811-4:1996 Implementation of EN ISO/IEC 7811-4:1996 Identification cards Recording technique Part 4: Location of read-only magnetic tracks Tracks 1 and 2 The European Standard EN ISO/IEC 7811-4:1996 has the status of a British Standard ICS 35.240.15 Licensed Copy: she
2、ffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO/IEC 7811-4:1996 This British Standard, having been prepared under the direction of the DISC Board, was published under the authority of the Standards Board and comes into effect on 15 December 1996 BSI
3、 10-1998 The following BSI references relate to the work on this standard: Committee reference IST/17 Draft for comment 95/646856 DC ISBN 0 580 26856 X Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/17, Identificatio
4、n cards and related devices, upon which the following bodies were represented: APACS (Barclaycard) APACS (Co-operative Bank) APACS (Lloyds Bank) APACS (Midland Bank) APACS (Nat West Bank) Association for Payment Clearing Services (APACS) BT Laboratories Cellnet Consumer Policy Committee of BSI Elect
5、ricity Association GPT Card Technology HMSO Mondex International Motorola Ltd. Rochford Thompson Equipment Shell UK Thorn Transit Systems International Vodafone Ltd. Westinghouse Cubic Ltd. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 1
6、5 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO/IEC 7811-4:1996 BSI 10-1998i Contents Page Committees responsibleInside front cover National forewordii Foreword 2 Forewordii Introduction1 1Scope1 2Conformance1 3Normative references1 4Definition1 5Location of magnetic material1 6Locat
7、ion of encoded data tracks1 7Beginning and end of encoding1 Annex ZA (normative) Normative references to international publications with their relevant European publications4 Figure 1 Location of magnetic stripe area for tracks 1 and 22 Figure 2 Location of tracks 1 and 22 Figure 3 Limits of encoded
8、 data3 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO/IEC 7811-4:1996 ii BSI 10-1998 National foreword This Part of BS EN ISO/IEC 7811-4 is the English language version of EN ISO/IEC 7811-4:1996 and implements it as the UK nationa
9、l standard. It supersedes BS 7106-4:1989 which is withdrawn. This Part of BS EN ISO/IEC 7811-4 is published under the direction of the DISC Board whose Technical Committee IST/17 has the responsibility to: aid enquirers to understand the text; present to the responsible international/European commit
10、tee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389
11、 Chiswick High Road, London, W4 4AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summ
12、ary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, page 2, the ISO/IEC title page, page ii, pages 1 to 5 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated i
13、n the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO/IEC 7811-4 July 1996 ICS 35.240.40 Descriptors: Data processing, data storage devices,
14、banking documents, financial documents, identification cards, recording, representation of characters, embossing, specifications English version Identification cards Recording technique Part 4: Location of read-only magnetic tracks Tracks 1 and 2 (ISO/IEC 7811-4:1995) Cartes didentification Techniqu
15、e denregistrement Partie 4: Position des pistes magntiques pour lecture uniquement Pistes 1 et 2 (ISO/IEC 7811-4:1995) Identifkationskarten Aufzeichnungstechnik Teil 4: Lage der Lesespuren 1 und 2 (ISO/IEC 7811-4:1995) This European Standard was approved by CEN on 1996-05-22. CEN members are bound t
16、o comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Centr
17、al Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as t
18、he official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Euro
19、pen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN ISO/IEC 7811-4:1996 E Licensed Copy: sheffieldun s
20、heffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-4:1996 BSI 10-1998 2 Foreword The text of the International Standard from Technical Committee ISO/IEC/JTC 1, Information technology, of the International Organization for Standardization (ISO) and the Inte
21、rnational Electrotechnical Commission (IEC) has been taken over as an European Standard by the Technical Board of CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 1997, and conflicting
22、 national standards shall be withdrawn at the latest by January 1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland
23、, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTENormative references to International Standards are listed in annex ZA (normative). Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (
24、c) BSI Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO /IEC 7811-4:1996 ii BSI 10-1998 Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized syst
25、em for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees co
26、llaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft international
27、Standards adopted by the joint technical committee are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. International Standard ISO/IEC 7811-4 was prepared by Joint Technical Committee ISO/IE
28、C JTC 1, Information technology, Subcommittee SC 17, Identification cards and related devices. This second edition cancels and replaces the first edition (ISO 7811-4:1985), of which it constitutes a technical revision. ISO/IEC 7811 consists of the following parts, under the general title Identificat
29、ion cards Recording technique: Part 1: Embossing; Part 2: Magnetic stripe; Part 3: Location of embossed characters on ID-1 cards; Part 4: Location of read-only magnetic tracks Tracks 1 and 2; Part 5: Location of read-write magnetic tracks Track 2. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov
30、15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-4:1996 BSI 10-19981 Introduction ISO/IEC 7811 is one of a series of standards describing the parameters for identification cards as defined in clause 4 and the use of such cards for international interchange. The recording techni
31、que and the coded character sets for track 1, intended for alphanumeric data, and for track 2, intended for numeric data, are specified in ISO/IEC 7811-2. 1 Scope This part of ISO/IEC 7811 specifies the location of the track for read-only magnetic recording, tracks 1 and 2, in identification cards.
32、ISO/IEC 10373 specifies the test procedures used to check cards against the parameters specified in this part of ISO/IEC 7811. This part of ISO/IEC 7811 specifies the requirements for cards used for identification. It takes into consideration both human and machine aspects and states minimum require
33、ments. NOTENumeric values in the SI and/or Imperial measurement system in this part of ISO/IEC 7811 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should not be intermixed or reconverted. The original design w
34、as made using the Imperial measurement system. 2 Conformance An identification card is in conformance with this part of ISO/IEC 7811 if it meets all mandatory requirements specified herein. A prerequisite for conformance with this part of ISO/IEC 7811 is conformance with ISO/IEC 7810 and ISO/IEC 781
35、1-2. 3 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC 7811. At the time of publication the editions indicated were valid. All standards are subject to revision and parties to agreements based on thi
36、s part of ISO/IEC 7811 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid international standards. ISO/IEC 7810:1995, Identification cards Physical characteristics. ISO/IEC
37、7811-2:1995, Identification cards Recording technique Part 2: Magnetic stripe. ISO/IEC 10373:1993, Identification cards Test methods. 4 Definition For the purposes of this part of ISO/IEC 7811, the definition of “identification card” given in ISO/IEC 7810 applies. 5 Location of magnetic material The
38、 magnetic material shall be located in the area shown in Figure 1. 6 Location of encoded data tracks Track 1 of encoded data shall extend between two lines, 5,66 mm (0,223 in) and 8,46 mm (0,333 in) from the top reference edge of the card, but not beyond a line 8,97 mm (0,353 in) from the top refere
39、nce edge of the card (see Figure 2). Track 2 of encoded data shall extend between two lines, 8,97 mm (0,353 in) and 11,76 mm (0,463 in) from the top reference edge of the card, but not closer than 8,46 mm (0,333 in) to the top reference edge of the card (see Figure 2). When track 3 specified in ISO/
40、IEC 7811-5 is also encoded, the edge of track 2 nearest track 3, including the effects of fringing, shall not extend beyond 12,27 mm (0,483 in) from the top reference edge of the card. 7 Beginning and end of encoding The centreline of the first data bit (start sentinel) shall be 7,44 0,50 mm (0,293
41、0,020 in) from the right edge of the card as shown in Figure 3. The centreline of the last data bit recorded shall not extend closer than 6,93 mm (0,273 in) from the left edge of the card as shown in Figure 3. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontroll
42、ed Copy, (c) BSI EN ISO/IEC 7811-4:1996 2 BSI 10-1998 Figure 1 Location of magnetic stripe area for tracks 1 and 2 Figure 2 Location of tracks 1 and 2 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-4:1996 BSI 10-19983 Figure
43、 3 Limits of encoded data Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-4:1996 4 BSI 10-1998 Annex ZA (normative) Normative references to international publications with their relevant European publications This European St
44、andard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply
45、to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. PublicationYearTitleENYear ISO/IEC 78101995Identification cards Physical characteristicsEN ISO/IEC 78101996 ISO/IEC 7811-21995Identificat
46、ion cards Recoding technique Part 2: Magnetic stripe EN ISO/IEC 7811-2 1996 ISO/IEC 103731995Identification cards Test methodsEN ISO/IEC 103731996 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 5blank Licensed Copy: sheffieldun sheffieldun,
47、 na, Wed Nov 15 05:31:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
48、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revis
49、ions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax