BS-EN-ISP-10610-1-1995.pdf

《BS-EN-ISP-10610-1-1995.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISP-10610-1-1995.pdf（68页珍藏版）》请在三一文库上搜索。

1、BRITISH STANDARD BS EN ISP 10610-1:1995 Implementation of EN ISP 10610-1:1994 Information technology International Standardized Profile FOD11 Open Document Format: Simple document structure Character content architecture only Part 1: Document Application Profile (DAP) The European Standard EN ISP 10

2、610-1:1994 has the status of a British Standard UDC 681.3:621.39:651.5/.7 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISP 10610-1:1995 This British Standard, having been prepared under the direction of the Information Systems Techn

3、ology Sector Board (T/-), was published under the authority of the Standards Board and comes into effect on 15 June 1995 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference IST/18 Draft for comment 91/68282 DC ISBN 0 580 24056 8 Committees responsible fo

4、r this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/18, Document processing and related communication, upon which the following bodies were represented: British Computer Society British Telecommunications plc Digital Equipment Co. Ltd. HM Treasur

5、y (Central Computer and Telecommunications Agency) IBM United Kingdom Ltd. International Computers Limited Joint Information Systems Committee of the Higher Education Funding Council Kodak Limited Level 7 Ltd. National Computing Centre Ltd. National Health Services Rank Xerox Ltd. SEMA Group Systems

6、 Ltd. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISP 10610-1:1995 BSI 02-2000i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Forewordv

7、ii Text of ISO/IEC ISP 10610-11 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISP 10610-1:1995 ii BSI 02-2000 National foreword This British Standard reproduces verbatim EN ISP 10610-1:1994 and implements it as the UK national standa

8、rd. This British Standard supersedes DD ENV 41509:1991 and DD ENV 41511:1991 which are withdrawn. This British Standard is published under the direction of the Information Systems Technology Sector Board whose Technical Committee IST/18 has the responsibility to: aid enquirers to understand the text

9、; present to the responsible European committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, ar

10、e available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself c

11、onfer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISP title page, page 2, the ISO/IEC ISP title page, pages ii to viii, pages 1 to 52 and a back cover. This standard has been updated (see copyright date) and m

12、ay have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP 10610-1 December 1994 ICS

13、35.100 Descriptors: Data processing, text processing, information interchange, documentation, documents, document architecture, logical structure, layout, formats, profiles. English version Information technology International Standardized Profile FOD11 Open Document Format: Simple document structur

14、e Character content architecture only Part 1: Document Application Profile (DAP) (Regional variant of ISO/IEC ISP 10610-1:1993) Technologies de linformation Profil normalis international FOD11 Format de document ouvert: Structure de document simple Architecure de contenu des caractres seulement Part

15、ie 1: Profil du document dapplication (DAP) (Variante rgionale de lISO/IEC ISP 10610-1:1993) Informationstechnik Internationale Profilnorm FOD11 Format fr Brodokumente Einfache Dokumentstruktur beschrnkt auf Inhaltsarchitektur fr Schriftzeichen Teil 1: Dokumentanwendungsprofil (regionale Version von

16、 ISO/IEC ISP 10610-1:1993) This European Standard was approved by CEN on 1994-12-05. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

17、nd bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsib

18、ility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1994 Cop

19、yright reserved to CEN members Ref. No. EN ISP 10610-1:1994 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISP 10610-1:1994 BSI 02-2000 2 Foreword The Technical Board decided to submit the International Standard Information Technology

20、International Standardized Profile FOD11 Open Document Format: Simple document structure Character content architecture only Part 1: Document Application profile (DAP) (Regional variant of ISO/IEC ISP 10610-1:1993) for adoption by the Unique Acceptance Procedure (UAP), in accordance with clause 4.6

21、of the CEN/CENELEC Internal Regulations, Part 2 of April 1990. The result of the Unique Acceptance Procedure was positive. For the time being this standard exists in the English version only. This document is the first part of a multi-part Functional Standard identified in M-IT-02 as F/OD11 Open Doc

22、ument Format Simple document structure Character content architecture only. M-IT-02 CEN/CENELEC/ETSI Memorandum on taxonomy of profiles and directory of functional standards This European Standard supersedes ENV 41509:1990 and ENV 41511:1990 which shall be withdrawn. This European Standard shall be

23、given the status of a National Standard, either by publication of an identical text or by endorsement, at the latest by June 1995, and conflicting national standards shall be withdrawn at the latest by June 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to

24、 implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. Endorsement notice The text of the International Standard ISO/IEC ISP 10610-1:1993 was appro

25、ved by CEN as a European Standard with agreed regional variations as given below. Section and line numbers correspond to the equivalent numbers in the International Standard. 1 Scope Replace the last two paragraphs by: “A document structure in accordance with this International Standard Profile is r

26、epresented for interchange by a document application profile which uses the Open Document Interchange Format (ODIF) as defined in CCITT Rec. T.415/ISO 8613-5.” 5.1 Data stream conformance Replace 5.1, a), with: “the data stream shall be encoded in accordance with the ASN.1 encoding rules defined in

27、CCITT Rec. X.209/ISO/IEC 8825” 5.2 Implementation conformance Replace 5.2, second paragraph, first sentence with: “A conforming receiving implementation shall be capable of receiving any data streams conforming to this International Standardized Profile structured in accordance with ODIF.” 8 Interch

28、ange format Replace 8, first paragraph with: “For conformance to this International Standardized Profile, the interchange format class A shall be used.” Interchange format SDIF 8.2 and its sub-clauses do not apply. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncon

29、trolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO/IEC ISP 10610-1:1993 (E) ii BSI 02-2000 Contents Page Forewordvii Introduction1 1Scope1 2Normative references2 2.1Paired Recommendations|International Standards equiva

30、lent in technical content2 2.2Additional references3 3Definitions3 4Relationship with other International Standardized Profiles4 5Conformance4 5.1Data stream conformance4 5.2Implementation conformance4 6Characteristics supported by this document application profile5 6.1Overview5 6.1.1General5 6.1.2F

31、ormatted form documents5 6.1.3Processable form documents5 6.1.4Formatted processable form documents6 6.2Logical characteristics6 6.2.1Introduction6 6.2.2Overview of the logical structure6 6.2.3Body part of the logical structure6 6.2.3.1DocumentLogicalRoot6 6.2.3.2Passage6 6.2.3.3BodyText7 6.2.4Commo

32、n content part of the logical structure7 6.2.4.1CommonContent7 6.2.4.2CommonText7 6.2.4.3PageNumber7 6.3Layout characteristics7 6.3.1Overview of the layout characteristics8 6.3.2DocumentLayoutRoot8 6.3.3PageSet8 6.3.4Page characteristics8 6.3.4.1Page constituents8 6.3.4.2Page dimensions9 6.3.4.3Nomi

33、nal Page sizes9 6.3.4.4Page offset9 6.3.4.5Page layout characteristics9 6.3.5Body area characteristics11 6.3.5.1General characteristics11 6.3.5.2BasicBody11 6.3.6Header and footer area characteristics11 6.3.6.1General characteristics11 6.3.6.2BasicHeader and BasicFooter11 6.3.7SpecificBlock11 6.4Doc

34、ument layout characteristics11 6.4.1Flow controls11 6.4.1.1Allocation of content to page sets11 6.4.1.2Allocation of content to page12 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO/IEC ISP 10610-1:1993 (E) BSI 02-2000iii Page 6.4.1.2.1

35、New layout object12 6.4.1.2.2Indivisibility12 6.4.1.2.3Same layout object12 6.4.1.3Allocation of content to body areas12 6.4.1.4Allocation of content to header-footer areas12 6.4.1.4.1Concatenation12 6.4.2Layout of the document content12 6.4.2.1Margins12 6.4.2.2Separation13 6.4.3Layout controls appl

36、icable in the absence of a generic layout structure13 6.5Content layout and imaging characteristics14 6.5.1Introduction14 6.5.2Character content architecture class14 6.5.3Character repertoire14 6.5.4Code extension techniques15 6.5.5Line spacing16 6.5.6Character spacing17 6.5.7Character path and line

37、 progression17 6.5.8Character orientation17 6.5.9Emphasis17 6.5.10Tabulation18 6.5.11Indentation18 6.5.12Alignment18 6.5.13First line format18 6.5.14Widow and orphan sizes19 6.5.15Reverse character string19 6.5.16Superscripts and subscripts19 6.5.17Line breaks19 6.5.18Substitution of characters19 6.

38、5.19Initial point19 6.5.20Use of control functions20 6.5.21Formatting the content20 6.6Miscellaneous features20 6.6.1Application comments20 6.6.2Alternative representation21 6.6.3Page numbering21 6.6.4User readable comments22 6.6.5User visible name22 6.7Document management features22 6.7.1Document c

39、onstituent information22 6.7.1.1Presence of document constituents22 6.7.2Document identification information22 6.7.2.1Document application profile information23 6.7.2.2Document architecture class information23 6.7.2.3Content architecture classes information23 6.7.2.4Interchange format class informat

40、ion23 6.7.2.5ODA version information23 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO/IEC ISP 10610-1:1993 (E) iv BSI 02-2000 Page 6.7.2.6Document reference23 6.7.3Document default information23 6.7.4Non-basic characteristics informatio

41、n23 6.7.4.1Profile character sets23 6.7.4.2Comments character sets24 6.7.4.3Alternative representation character sets24 6.7.5Document management attributes24 7Specification of constituent constraints25 7.1Introduction25 7.1.1Diagrams of relationships of logical constituents25 7.1.2Diagrams of relati

42、onships of layout constituents26 7.1.3Notation26 7.2Document profile constituent constraints27 7.2.1Macro definitions27 7.2.2Constituent constraints32 7.2.2.1DocumentProfile32 7.3Logical constituent constraints35 7.3.1Macro definitions35 7.3.2Factor constraints35 7.3.2.1FACTOR ANY-LOGICAL35 7.3.3Con

43、stituent constraints36 7.3.3.1DocumentLogicalRoot36 7.3.3.2Passage36 7.3.3.3BodyText36 7.3.3.4CommonContent37 7.3.3.5CommonText37 7.3.3.6PageNumber37 7.4Layout constituent constraints38 7.4.1Macro definitions38 7.4.2Factor constraints39 7.4.2.1FACTOR ANY-COMPOSITE-LAYOUT39 7.4.2.2FACTOR ANY-PAGE39 7

44、.4.2.3FACTOR ANY-FRAME40 7.4.3Constituent constraints40 7.4.3.1DocumentLayoutRoot40 7.4.3.2PageSet40 7.4.3.3Page41 7.4.3.4RectoPage41 7.4.3.5VersoPage42 7.4.3.6BasicHeader42 7.4.3.7BasicBody42 7.4.3.8BasicFooter43 7.4.3.9SpecificBlock43 7.5Layout style constituent constraints44 7.5.1Macro definition

45、s44 7.5.2Factor constraints44 7.5.2.1FACTOR ANY-LAYOUT-STYLE44 7.5.3Constituent constraints44 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 09:40:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO/IEC ISP 10610-1:1993 (E) BSI 02-2000v Page 7.5.3.1L-Style144 7.5.3.2L-Style244 7.5.3.3L-Style34

46、5 7.6Presentation style constituent constraints45 7.6.1Macro definitions45 7.6.2Factor constituent constraints45 7.6.2.1FACTOR ANY-PRESENTATION-STYLE45 7.6.3Constituent constraints45 7.6.3.1P-Style145 7.6.3.2P-Style246 7.6.3.3P-Style346 7.6.3.4P-Style446 7.7Content portion constituent constraints46

47、7.7.1Macro definitions46 7.7.2Factor constraints46 7.7.3Constituent constraints47 7.7.3.1Character-content-portion47 8Interchange format48 8.1Interchange format class A48 8.1.1Interchange format48 8.1.2Document application profile object identifier48 8.1.3Encoding of application comments48 8.1.4Data

48、 lengths48 8.2Interchange format SDIF48 8.2.1Interchange format48 8.2.2Document application profile object identifier48 8.2.3Encoding of application comments49 Annex A Amendments and technical corrigenda50 A.1Amendments50 A.1.1Amendments to the base standard50 A.1.2Proposed changes to standards due

49、to defects50 A.2Technical corrigenda50 A.2.1Technical corrigenda to this International Standardized Profile50 A.3Versions of the ODA International Standard50 Annex B Recommended practices51 B.1Transfer methods for ODA51 B.1.1Conveyance of ODA over CCITT X.400:198451 B.1.2Conveyance of ODA over FTAM51 B.1.3Conveyance of ODA over DTAM51 B.1.4Conveyance of ODA over flexible disks51 B.2Interoperability with SGML applications52 Annex C Bibliography52 Figure 1 Page layout (portrait orientation)10 Figure 2 Page layout (