《BS-ISO-1505-1993.pdf》由会员分享，可在线阅读，更多相关《BS-ISO-1505-1993.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 1505:1993 Implementation of ISO 1505:1993 Textile machinery Widths relating to dyeing and finishing machines Definitions and range of nominal widths UDC 677.057 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1
2、505:1993 This British Standard, having been prepared under the direction of the Textiles and Clothing Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 August 1993 BSI 01-2000 The following BSI references relate to the work on this stand
3、ard: Committee reference TCM/33 Draft for comment 92/37267 DC ISBN 0 580 22490 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Textiles and Clothing Standards Policy Committee (TCM/-) to Technical Committee TCM/33, upon which the follo
4、wing bodies were represented: British Association of Clothing Machinery Manufacturers British Narrow Fabrics Association British Paper and Board Industry Federation British Textile Machinery Association British Textile Technology Group Clothing and Footwear Institute Confederation of British Wool Te
5、xtiles Limited Consumer Policy Committee of BSI Health and Safety Executive Knitting Industries Federation Ltd. Textile Finishers Association Textile Institute Textile Research Council (HATRA) University of Manchester (Institute of Science and Technology) Amendments issued since publication Amd. No.
6、DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1505:1993 BSI 01-2000i Contents Page Committees responsibleInside front cover National forewordii Forewordiii Text of ISO 15051 Licensed Copy: sheffieldun sheffieldun, na, S
7、at Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1505:1993 ii BSI 01-2000 National foreword This British Standard reproduces verbatim ISO 1505:1993 and implements it as the UK national standard. This British Standard is published under the direction of the Textiles and Clothing S
8、tandards Policy Committee whose Technical Committee TCM/33 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and E
9、uropean developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, Publications, BSI, Linford Wood, Milton Keynes, MK14 6LE. A British Standard does not purport to include all the necessary provisions of
10、a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO title page, pages
11、 ii to iv, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+
12、00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 1505:1993(E) ii BSI 01-2000 Contents Page Forewordiii 1Scope1 2Definitions1 3Range of nominal widths, b1 Annex A (informative) BibliographyInside back
13、 cover Figure 1 Machines and plant General plan2 Figure 2 Machines and plant with tentering chains2 Table 11 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 1505:1993(E) BSI 01-2000iii Foreword ISO (the International Organization for Sta
14、ndardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the righ
15、t to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft Internat
16、ional Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 1505 was prepared by Technical Committee ISO/TC 72, Textile
17、machinery and allied machinery and accessories, Sub-Committee SC 4, Dyeing, finishing and allied machinery and accessories. This second edition cancels and replaces the first edition (ISO 1505:1982), of which it constitutes a technical revision. Annex A of this International Standard is for informat
18、ion only. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 1505:1993(E) BSI 01-20001 1 Scope This International Standard d
19、efines the critical widths relating to dyeing and finishing machines to enable the specification, without ambiguity, of these essential dimensions, particularly in orders. The basic width is the nominal width b as defined in 2.3. It also specifies the range of nominal widths for this equipment. 2 De
20、finitions For the purposes of this International Standard, the following definitions apply. The dimensions defined are illustrated in Figure 1 and Figure 2. 2.1 maximum working width, a1 maximum width, in millimetres, of textile fabric that can be processed 2.2 minimum working width, a2 minimum widt
21、h, in millimetres, of textile fabric that can be processed 2.3 nominal width, b width, in millimetres, of the machine elements which house the textile fabric during a treatment process b = a1 + j 100 where j is a coefficient, e.g. j = 1, 2, 3, . 2.4 maximum stentering width, s1 (only for machines wi
22、th tentering chains) maximum permissible width, in millimetres, between stentering elements, as specified by the machine manufacturer s1 = a1 k where k is the total width, in millimetres, of the selvedge overhang, i.e. the sum of the widths of the two selvedge overhangs k/2 at the edges of the texti
23、le fabric (see Figure 2) 2.5 minimum stentering width, s2 (only for machines with tentering chains) minimum permissible width, in millimetres, between stentering elements, as specified by the machine manufacturer 2.6 width, in millimetres, of machine elements, c see Figure 1, for example the length
24、of a roller c = b + y where y = j 100 j = 0, 1, 2, . it is recommended that c = b 2.7 frame inside width, g width, in millimetres, between the interior surfaces of the machine frames g = b + j 100 j = 1, 2, 3, . 2.8 fitting dimensions, m dimensions, in millimetres, for the connection to other machin
25、es or other parts of machines m = b + j 200 j = 1, 2, 3, . 3 Range of nominal widths, b See Table 1. Table 1 Dimensions in millimetres 1 000 2 0003 0004 000(5 000) 6 000 (200) 1 200 2 200(3 200) (4 200) 5 200(6 200) 4001 400 2 4003 4004 400(5 400) 6 400 6001 600 2 600(3 600) (4 600) 5 600(6 600) (80
26、0) 1 800 2 8003 8004 800(5 800) 6 800 NOTEValues in brackets shall be avoided wherever possible. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 1505:1993(E) 2 BSI 01-2000 Figure 1 Machines and plant General plan Figure 2 Machines and pl
27、ant with tentering chains Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 1505:1993(E) BSI 01-20003 Annex A (informative) Bibliography 1 ISO 1506:1982, Textile machinery Dyeing, finishing and allied machinery Classification and nomenclat
28、ure. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 1505:1993 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents th
29、e UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to im
30、prove the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax
31、: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 0
32、20 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, Eu
33、ropean and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing
34、members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications
35、. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocop
36、ying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementati
37、on then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 25 13:34:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI