《IEC-TS-61827-2004.pdf》由会员分享，可在线阅读，更多相关《IEC-TS-61827-2004.pdf（32页珍藏版）》请在三一文库上搜索。
1、 TECHNICAL SPECIFICATION IEC TS 61827 Pre-Standard First edition 2004-05 Electrical installations for lighting and beaconing of aerodromes Characteristics of inset and elevated luminaires used on aerodromes and heliports Reference number IEC/TS 61827:2004(E) Copyright International Electrotechnical
2、Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:50:27 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a desi
3、gnation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporat
4、ing amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication,
5、 including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as th
6、e list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (http:/www.iec.ch/searchpub/cur_fut.htm) enables you to search by a variety of criteria including text searches, technical committees
7、 and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (http:/www.iec.ch/online_news/ justpub/jp_entry.htm) is also available by email
8、. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Cop
9、yright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:50:27 MSTNo reproduction or networking permitted without license from IHS -,-,- TECHNICAL SPECIFICATION IEC TS 61827 Pre-Standard
10、First edition 2004-05 Electrical installations for lighting and beaconing of aerodromes Characteristics of inset and elevated luminaires used on aerodromes and heliports PRICE CODE IEC 2004 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by an
11、y means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.c
12、h Web: www.iec.ch T For price, see current catalogue Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/
13、09/2007 07:50:27 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 TS 61827 IEC:2004(E) CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references6 3 Terms, definitions and abbreviations.7 3.1 Terms and definitions 7 3.2 Abbreviations.9 4 Classification9 4.1 Dielec
14、tric rigidity9 5 General requirements .9 5.1 General .9 5.2 Dimensional requirements .9 5.3 Environmental requirements 11 5.4 Construction requirements.12 5.5 Structural requirements .12 5.6 Interface requirements.13 5.7 Drainage requirements 13 5.8 Electrical requirements 14 5.9 Photometric require
15、ments14 5.10 Optical requirements14 5.11 Maintenance requirements.14 5.12 Accelerated life of luminaires.15 5.13 Lamp life requirements 15 5.14 Instruction manual .15 6 Test procedures for airfield lighting luminaires 15 6.1 General test requirements .17 6.2 Dimensional tests 17 6.3 Environmental te
16、sts .17 6.4 Structural tests 18 6.5 Electrical tests.21 6.6 Functional tests .21 6.7 Endurance tests.22 Bibliography25 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:50:27 MS
17、TNo reproduction or networking permitted without license from IHS -,-,- TS 61827 IEC:2004(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES CHARACTERISTICS OF INSET AND ELEVATED LUMINAIRES USED ON AERODROMES AND HELIPORTS FOREWORD 1) T
18、he International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical a
19、nd electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical c
20、ommittees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organizatio
21、n for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical commi
22、ttee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is
23、 accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and r
24、egional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in confo
25、rmity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for an
26、y personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normati
27、ve references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsi
28、ble for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a Technical Specification when the required support cannot be obtained for the public
29、ation of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical Specifications are subject to review within three
30、 years of publication to decide whether they can be transformed into International Standards. IEC 61827, which is a Technical Specification, has been prepared by IEC technical committee 97: Electrical installations for lighting and beaconing of aerodromes. Copyright International Electrotechnical Co
31、mmission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:50:27 MSTNo reproduction or networking permitted without license from IHS -,-,- 4 TS 61827 IEC:2004(E) The text of this Technical Specification is based on the following
32、documents: Enquiry draft Report on voting 97/98A/DTS 97/99/RVC Full information on the voting for the approval of this Technical Specification can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The c
33、ommittee has decided that the contents of this publication will remain unchanged until 2007. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this Technical Specification may be issued at a later date. Copyright Internati
34、onal Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:50:27 MSTNo reproduction or networking permitted without license from IHS -,-,- TS 61827 IEC:2004(E) 5 INTRODUCTION Aeronautical ground lighting (
35、AGL) at an aerodrome or heliport provides the pilot of an aircraft with location, orientation and alignment information in adverse visibility conditions and at night. This includes those aircraft in flight, i.e. on approach to or take off from the aerodrome, and those aircraft and other vehicles mov
36、ing on the aerodrome surface. The type of lighting is dependent upon the aerodrome operations, type and density of traffic, aerodrome layout and other environmental considerations and may be realised in many different forms. For the purpose of this Technical Specification, the various types of light
37、ing, referred to as AGL services, are considered as components of the overall AGL system. This Technical Specification describes the system component requirements and it deals with the inset and elevated luminaires used in AGL. This Technical Specification should be considered with the AGL requireme
38、nts produced by the International Civil Aviation Organisation (ICAO). ICAO requirements are published in the form of annexes to the Chicago Convention on International Civil Aviation (1944) to which signatory nations apply to the air traffic and navigation services within their control regions. The
39、annexes contain Standards and Recommended Practices (SARPs), describing performance requirements, based on operational requirements, for the safety, regularity or efficiency of international air navigation. Other ICAO publications contain additional procedures, performance specifications and guidanc
40、e material for the interpretation and implementation of the SARPs. Annex 14, Aerodromes (Volumes I and II), to the Convention contains the requirements for aerodrome and heliport operations and includes those aspects relating to AGL. The Aerodrome Design Manual Doc. 9157 Part 4 (Visual Aids) contain
41、s guidance material on the interpretation of the AGL requirements in Annex 14, Aerodromes. Part 5 of the Aerodrome Design Manual Doc. 9157 (Electrical Systems) contains technical information on the electrical supply and installation of AGL Systems. Recommended maintenance policies and practices for
42、AGL Systems are contained in Part 9 of the Airport Services Manual Doc. 9137 (Airport Maintenance Practices). The safety and technical specifications, requirements and working practices within this International Technical Specification are intended to be compatible with the Standards and Recommended
43、 Practices contained in Annex 14, Aerodromes and to complement the information contained in the Aerodrome Design Manual Doc. 9157 and the Aerodrome Services Manual Part 9 (Aerodrome Maintenance Practices). The AGL system will evolve with the introduction of new technology and the implementation of n
44、ew operational requirements. The general requirements for the AGL system in this Technical Specification are therefore to be considered generic. To conform to this Technical Specification, it should be demonstrated to the relevant bodies that the requirements have been satisfied and therefore that t
45、he clause objective(s) has been met. NOTE 1 Examples of relevant bodies would include the following: aerodrome management; certification and licensing authorities; safety regulators; notified bodies for international or European directives; national standards bodies. Copyright International Electrot
46、echnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:50:27 MSTNo reproduction or networking permitted without license from IHS -,-,- 6 TS 61827 IEC:2004(E) ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF A
47、ERODROMES CHARACTERISTICS OF INSET AND ELEVATED LUMINAIRES USED ON AERODROMES AND HELIPORTS 1 Scope This Technical Specification defines the requirements and testing procedures for inset and elevated luminaires with lamps used in aeronautical ground lighting systems and excluding luminaires for gene
48、ral lighting. This Technical Specification is applicable to inset or elevated luminaires used for: approach lights: centreline, crossbars, supplementary approach; runway lights: runway guard, threshold, threshold wingbar, centreline, edge, touch down zone, runway end, stopway lights; taxiway lights : centreline, edge, stopbar, intermediate holding position lights; heliports: aiming point, perimeter, fato luminaires. The purpose of this Technical Speci