《IEC-61068-3-1-1995.pdf》由会员分享，可在线阅读，更多相关《IEC-61068-3-1-1995.pdf（17页珍藏版）》请在三一文库上搜索。
1、Publication 61068-3-1 de la CE1 (Deuxime dition - 1995) Rubans tisss en fibre de polyester - Partie 3: Spcifications pour matriaux particuliers - Feuille I: Rubans tisss sur des mtiers conventionnels ou sans navette IEC Publication 61 068-3-1 (Second edition - 1995) Polyester fibre woven tapes - Par
2、t 3: Specifications for individual materials - Sheet i: Tapes woven on conventional or shuttleless looms CORRIGENDUM Page 8 Tableau 1 Page 9 Table 1 Dans /EI fangee Nombre de fils de chane (fiislcm) et dans /a fang - la CE1 417: Symboles graphiques utilisables sur le matriel. Index, relev et compila
3、tion des feuilles individuelles; - la CE1 617: Symboles graphiques pour schmas: et pour les appareils lectromdicaux, - lectriques en pratique mdicale. la CE1 878: Symboles graphiques pour quipements Les symboles et signes contenus dans la prsente publi- cation ont t soit tirs de la CE1 27, de la CE1
4、 417, de la CE1 617 et/ou de la CE1 878, soit spcifiquement approuvs aux fins de cette publication. Publications de la CE1 tablies par le mme comit dtudes Lattention du lecteur est attire sur les listes figurant la fin de cette publication, qui numrent les publications de la CE1 prpares par le comit
5、 dtudes qui a tabli la prsente publication. Validity of this publication The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirmation of the publication is availa
6、ble from the IEC Central Office. , Information on the revision work, the issue of revised editions and amendments may be obtained from IEC National Committees and from the following IEC sources: IEC Bulletin * IEC Yearbook * Catalogue o f IEC publications Published yearly Published yearly with regul
7、ar updates Terminology For general terminology, readers are referred to IEC 50: International Electrotechnical Vocabulary (IEV), which is issued in the form of separate chapters each dealing with a specific field. Full details of the IEV will be supplied on request. See also the IEC Multilingual Dic
8、tionary. The terms and definitions contained in the present publi- cation have either been taken from the IEV or have been specifically approved for the purpose of this publication. Graphical and letter symbols For graphical symbols, and letter symbols and signs approved by the IEC for general use,
9、readers are referred to publications: - IEC 27: Lerter symbols to be used in electrical technology; - IEC 417: Graphical symbols for use on equip- ment. Index, survey and compilation of the single sheers; - IEC 617: Graphical symbols for diagrams; and for medical electrical equipment, - equipmenr in
10、 medical practice. IEC 878: Graphical symbols for electromedical The symbols and signs contained in the present publi- cation have either been taken from IEC 27, IEC 417, IEC 617 and/or IEC 878, or have been specifically appro- ved for the purpose of this publication. IEC publications prepared by th
11、e same technical committee I The attention of readers is drawn to the end pages of this publication which list the IEC publications issued by the technical committee which has prepared the present publication. Copyright International Electrotechnical Commission Provided by IHS under license with IEC
12、Licensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 21:47:20 MSTNo reproduction or networking permitted without license from IHS -,-,- 4844893 0577854 302 NORME INTERNATIONALE INTERNATIONAL STANDARD CE1 IEC 1068134 Deuxime dition Second edition 1995-02 Rubans tisss en
13、 fibres de polyester Partie 3: Spcifications pour matriaux particuliers Feuille 1 : Rubans tisss sur des mtiers conventionnels ou sans navette Polyester fibre woven tapes Part 3: Specifications for individual materials Sheet 1 : Tapes woven on conventional or shuttleless looms CE1 1995 Droits de rep
14、roduction rservs - CopyrigM - all Ms reserved Bureau Centrai de la Commission Electrotedinique intemationale 3. nie de Vd OenBve, Suisse Commission Electrotechnique Internationale CODE PRIX international Electrotechnical Commission PRICE CODE E Memnywpoman 3neinporexnwuecnan HoMwccnn Pour ph. voir c
15、atdoguo on vuour For price. see currani cataiogue Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 21:47:20 MSTNo reproduction or networking permitted without license from IHS
16、 -,-,- 4844891 0577855 249 15C( BC)356 - 2 - 1068-3-1 O CEI:1995 15C/482/RVD COMMISSION LECTROTECHNIQUE INTERNATIONALE RUBANS TISSS EN FIBRES DE POLYESTER - Partie 3: Spcifications pour matriaux particuliers - Feuille 1 : Rubans tisss sur des mtiers conventionnels ou sans navette AVANT-PROPOS 1) La
17、CE1 (Commission Electrotechnique Internationale) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CE1 a pour objet de favoriser la coopration internationale pour toutes les questions de normalisation dans les d
18、omaines de llectricit et de llectronique. A cet effet, la CEI, entre autres activits, publie des Normes internationales. Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Ces organisations internationales, gouvernementa
19、les et non gouvernementales, en liaison avec la CEI. participent galement aux travaux. La CE1 collabore troitement avec lOrganisation Internationale de Normalisation (EO), selon des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CE1 en ce qui con
20、cerne les questions techniques, prpars par les comits dtudes o sont reprsents tous les Comits nationaux sintressant ces questions, expriment dans la plus grande mesure possible un accord international sur les sujets examins. 3) Ces dcisions constituent des recommandations internationales publies sou
21、s forme de normes, de rapports techniques ou de guides et agres comme telles par les Comits nationaux. 4) Dans le but dencourager lunification internationale, les Comits nationaux de la CE1 sengagent B appliquer de faon transparente, dans toute Ia mesure possible, les Normes internationales de la CE
22、1 dans leurs normes nationales et rgionales. Toute divergence entre la norme de la CE1 et la norme nationale ou rgionale correspondante doit tre indique en termes clairs dans cette dernire. La prsente feuille de la Norme internationale CE1 1068-3 a t tablie par le sous- comit 1%: Spcifications, du c
23、omit dtudes 15 de la CEI: Matriaux isolants. Cette deuxime dition annule et remplace la premire dition parue en 1992. Le texte de cette feuille est issu des documents suivants: I DIS I Rapport de vote I Le rapport de vote indiqu dans le tableau ci-dessus donne toute information sur le vote ayant abo
24、uti lapprobation de cette feuille. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 21:47:20 MSTNo reproduction or networking permitted without license from IHS -,-,- 4844891
25、0577856 185 DIS 1068-3-1 O IEC:1995 -3- Report on voting INTERNATIONAL ELECTROTECHNICAL COMMISSION 15C(C0)356 POLYESTER FIBRE WOVEN TAPES - 15CI482lRVD Part 3: Specifications for individual materials - Sheet 1 : Tapes woven on conventional or shuttleless looms FOREWORD 1) The IEC (International Elec
26、trotechnicat Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international cooperation on all questions concerning standardization in the electrical and electronic fields. T
27、o this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmenta
28、l organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (EO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC
29、on technical matters, prepared by technical committees on which all the National Committees having a special interest therein are represented, express, as nearly as possible, an international consensus of opinion on the subjects dealt with. 3) They have the form of recommendations for international
30、use published in the form of standards, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification; IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in
31、 their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. This sheet of International Standard IEC 1068-3 has been prepared by sub-committee 15C: Specifications, of IEC technical commi
32、ttee 15: Insulating materials. This second edition cancels and replaces the first edition published in 1992. Full information on the voting for the approval of this sheet can be found in the report on voting indicated in the above table. Copyright International Electrotechnical Commission Provided b
33、y IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 21:47:20 MSTNo reproduction or networking permitted without license from IHS -,-,- 4844891 0577857 OLL 1068-3-1 O CEI:1995 - 4 - INTRODUCTION t a prsente norme internationale fait partie d
34、une srie traitant des rubans tisss en fibre polyester. Cette partie se rapporte aux spcifications pour matriaux particuliers. Cette srie comporte trois parties: Partie 1 : Dfinitions, dsignation et prescriptions gnrales (CE1 1068-1) * Partie 2: Mthodes dessai (CE1 1068-2) Partie 3: Spcifications pou
35、r matriaux particuliers (CE1 1068-3) La prsente norme comprend lune des feuilles qui composent la partie 3, comme suit: Feuille 1 : Rubans tisss sur mtiers conventionnels ou sans navette. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees
36、/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 21:47:20 MSTNo reproduction or networking permitted without license from IHS -,-,- 484489L 0577858 T58 -5- INTRODUCTION This International Standard is one of a series which deals with polyester fibre woven tapes. This part applies to spec
37、ifications for individual materials. This series consists of three parts: Part 1 : Definitions, designation and general requirements (IEC 1068-1) Part 2: Methods of test (IEC 1068-2) Part 3: Specification for individual materials (IEC 1068-3) This standard contains one of the sheets composing part 3
38、, as follows: Sheet 1 : Tapes woven on conventional or shuttleless looms. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 21:47:20 MSTNo reproduction or networking permitted
39、without license from IHS -,-,- 4844893 0577859 994 1068-3-1 O CEI: 1 995 - 6 - RUBANS TISSS EN FIBRES DE POLYESTER - Partie 3: Spcifications pour matriaux particuliers - Feuille 1 : Rubans tisss sur des mtiers conventionnels ou sans navette 1 Domaine dapplicatlon La prsente feuille de la CE1 1068-3
40、donne les prescriptions relatives aux rubans tisss sur des mtiers conventionnels ou sans navette partir de fils continus de fibres polyester. Cette feuille donne les prescriptions particulires relatives au nombre de fils de chane, au nombre de fils de trame, au retrait (longueur et largeur) et la rs
41、istance la traction des rubans de types 1,2 et 3. 2 Rfrences normatives Les documents normatifs suivants contiennent des dispositions qui, par suite de la rfrence qui y est faite, constituent des dispositions valables pour la prsente Norme internationale. Au moment de la publication, les ditions ind
42、iques taient en vigueur. Tout document normatif est sujet rvision et les parties prenantes aux accords fonds sur la prsente Norme internationale sont invites rechercher la possibilit dappliquer les ditions les plus rcentes des documents normatifs indiqus ci-aprs. Les membres de la CE1 et de IISO pos
43、sdent le registre des Normes internationales en vigueur. CE1 1068-1: 1991, Spcification pour rubans tisss en fibres de polyester - Partie 7: Dfinitions, dsignation et prescriptions gnrales CE1 1068-2: 1991, Spcification pour rubans tisss en fibres de polyester - Partie 2: Mthodes dessai 3 Prescripti
44、ons Outre le fait quils doivent tre conformes aux prescriptions gnrales de la partie 1 de la CE1 1068, les rubans doivent satisfaire aux prescriptions particulires appropries leur type, indiques dans le tableau 1 de cette feuille. Copyright International Electrotechnical Commission Provided by IHS u
45、nder license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 21:47:20 MSTNo reproduction or networking permitted without license from IHS -,-,- 4844893 0577860 606 1068-3-1 O IEC:1995 - 7 - POLYESTER FIBRE WOVEN TAPES - Part 3: Specifications for individua
46、l materials - Sheet 1 : Tapes woven on conventional or shuttleless looms 1 Scope This sheet of IEC 1068-3 gives the requirements for tapes woven on conventional or shuttleless looms from continuous filament polyester fibres. This sheet gives specific requirements for the number of warp ends, the num
47、ber of picks, the shrinkage (length and width), and the tensile strength of type 1, 2 and 3 tapes. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the
48、editions indicated were valid. All normative documents are subject to revision, and parties to agreement based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IEC 1068-1 : 1991, Spec