《IEC-61182-2-2006.pdf》由会员分享，可在线阅读，更多相关《IEC-61182-2-2006.pdf（168页珍藏版）》请在三一文库上搜索。
1、 INTERNATIONAL STANDARD IEC 61182-2 First edition 2006-09 Printed board assembly products Manufacturing description data and transfer methodology Part 2: Generic requirements Reference number IEC 61182-2:2006(E) Copyright International Electrotechnical Commission Provided by IHS under license with I
2、ECLicensee=NASA Marshall Space Flight Center/9972545001 Not for Resale, 03/06/2007 23:04:15 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC
3、34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incor
4、porating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the I
5、EC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also availab
6、le from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available
7、on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. C
8、ustomer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license with
9、 IECLicensee=NASA Marshall Space Flight Center/9972545001 Not for Resale, 03/06/2007 23:04:15 MSTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IEC 61182-2 First edition 2006-09 Printed board assembly products Manufacturing description data and transfer
10、 methodology Part 2: Generic requirements IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International El
11、ectrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch XH For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical
12、Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=NASA Marshall Space Flight Center/9972545001 Not for Resale, 03/06/2007 23:04:15 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 61182-2 IEC:2006(E) CONTENTS FORE
13、WORD.7 1 Scope and object9 1.1 Focus and intent9 1.2 Notation 9 2 Normative references .10 3 Documentation conventions10 4 Requirements.12 4.1 Rules concerning the use of XML and XML Schema13 4.2 Data organization and identification rules 14 4.3 Transformation characteristics (Xform)19 4.4 Substitut
14、ion groups .21 5 Content 32 5.1 Content: FunctionMode .33 5.2 Function levels 35 5.3 Content: StepListRef .47 5.4 Content: LayerDescRef .47 5.5 Content: BomRef.48 5.6 Content: AvlRef.48 5.7 Content: DictionaryStandard49 5.8 Content: DictionaryUser 66 5.9 Content: DictionaryFont.74 5.10 Content: Dict
15、ionaryLineDesc .77 5.11 Content: DictionaryColor .79 5.12 Content: DictionaryFirmware .80 6 Logistic header.82 6.1 LogisticHeader 82 6.2 Role 83 6.3 Enterprise .84 6.4 Person 85 7 History record.86 7.1 HistoryRecord .86 7.2 FileRevision 87 7.3 SoftwarePackage 87 7.4 ChangeRec .88 8 BOM (Material Lis
16、t) 89 8.1 BOM Header .90 8.2 BomItem91 9 Electronic computer aided design (ecad) 96 9.1 CadHeader97 9.2 CadData/LayerDesc 100 9.3 CadData/StepList 109 10 Approved vendor list (AVL).150 10.1 AvlHeader .151 10.2 AvlItem152 11 Glossary.154 Copyright International Electrotechnical Commission Provided by
17、 IHS under license with IECLicensee=NASA Marshall Space Flight Center/9972545001 Not for Resale, 03/06/2007 23:04:15 MSTNo reproduction or networking permitted without license from IHS -,-,- 61182-2 IEC:2006(E) 3 Annexe A (informative) IPC-7351 Naming Convention for Land Patterns155 Annexe B Informa
18、tive references 160 Figure 1 The IEC 61182-2 children element .13 Figure 2 Printed board viewing.18 Figure 3 Mirror and rotation diagram21 Figure 4 Bounding rectangle to round end character relationships .72 Figure 5 Text transformation examples 73 Figure 6 Rotation Angle .73 Figure 7 Glyph bounding
19、 rectangles to Text bounding box relationships.77 Table 1 Graphical notation overview .11 Table 2 Governing template basic types defined by W3C.16 Table 3 Governing template basic types defined by IEC 61182-2-X17 Table 4 Xform characteristics.19 Table 5 Substitution groups .22 Table 6 Attribute subs
20、titution group 23 Table 7 ColorGroup substitution group 25 Table 8 Feature substitution group 25 Table 9 Fiducial substitution group 26 Table 10 FirmwareGroup substitution group 26 Table 11 FontDef substitution group 27 Table 12 LineDescGroup substitution group 27 Table 13 Polystep substitution grou
21、p 28 Table 14 Simple substitution group 28 Table 15 Standard primitive substitution group.29 Table 16 StandardShape substitution group.31 Table 17 UserPrimitive substitution group 31 Table 18 UserShape substitution group32 Table 19 Content sub-element.32 Table 20 File segmentation and function appor
22、tionment.34 Table 21 Content FunctionMode .36 Table 22 Content StepListRef .47 Table 23 Content LayerDescRef .48 Table 24 Content BomRef.48 Table 25 Content AvlRef .49 Table 26 Content DictionaryStandard.49 Table 27 StandardPrimitive Butterfly.50 Table 28 StandardPrimitive Circle.51 Table 29 Standar
23、dPrimitive Contour51 Table 30 StandardPrimitive Diamond 53 Table 31 StandardPrimitive Donut.54 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=NASA Marshall Space Flight Center/9972545001 Not for Resale, 03/06/2007 23:04:15 MSTNo reproduction or net
24、working permitted without license from IHS -,-,- 4 61182-2 IEC:2006(E) Table 32 StandardPrimitive Ellipse55 Table 33 StandardPrimitive Hexagon 56 Table 34 StandardPrimitive Moire .57 Table 35 StandardPrimitive Octagon.58 Table 36 StandardPrimitive Oval.58 Table 37 StandardPrimitive RectCenter 59 Tab
25、le 38 StandardPrimitive RectCham.60 Table 39 StandardPrimitive RectCorner 61 Table 40 StandardPrimitive RectRound.62 Table 41 StandardPrimitive Thermal 63 Table 42 StandardPrimitive Triangle .65 Table 43 Content DictionaryUser 66 Table 44 UserPrimitive Simple 67 Table 45 UserPrimitive Simple: Arc.67
26、 Table 46 UserPrimitive Simple: Line .68 Table 47 UserPrimitive Simple: Outline.69 Table 48 UserPrimitive Simple: PolyLine.70 Table 49 UserPrimitive Text.71 Table 50 UserPrimitive UserSpecial74 Table 51 Content DictionaryFont.74 Table 52 FontDetEmbedded element .75 Table 53 FontDetExternal element.7
27、5 Table 54 FontDet Glyph 76 Table 55 Content DictionaryLineDesc .77 Table 56 LineDesc element78 Table 57 LineDescRef element 79 Table 58 Content DictionaryColor .79 Table 59 Color element80 Table 60 ColorRef element 80 Table 61 Content DictionaryFirmware .80 Table 62 CachedFirmware element81 Table 6
28、3 FirmwareRef element 82 Table 64 LogisticHeader element.82 Table 65 Role element.83 Table 66 Enterprise element 84 Table 67 Person element .85 Table 68 HistoryRecord element86 Table 69 FileRevision element.87 Table 70 SoftwarePackage element.87 Table 71 ChangeRec element88 Table 72 Bom element .89
29、Table 73 BomHeader element90 Table 74 BomItem91 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=NASA Marshall Space Flight Center/9972545001 Not for Resale, 03/06/2007 23:04:15 MSTNo reproduction or networking permitted without license from IHS -,-,
30、- 61182-2 IEC:2006(E) 5 Table 75 RefDes element.92 Table 76 Tuning element .93 Table 77 Firmware element93 Table 78 Characteristics element.94 Table 79 Measured element.94 Table 80 Ranged element 95 Table 81 Enumerated element .96 Table 82 Textual element.96 Table 83 Ecad96 Table 84 CadHeader elemen
31、t 97 Table 85 Spec element 98 Table 86 SurfaceFinish element.99 Table 87 ChangeRec element100 Table 88 CadData/LayerDesc elements .101 Table 89 Layer element .101 Table 90 Span element 103 Table 91 DrillTool element .104 Table 92 Stackup element .105 Table 93 StackupGroup .105 Table 94 StackupImpeda
32、nce element.107 Table 95 CadData StepList 109 Table 96 Step 110 Table 97 Attribute substitution group111 Table 98 PadStack element .112 Table 99 LayHole element .112 Table 100 LayerPad element .113 Table 101 Route element.114 Table 102 Set 115 Table 103 Datum element 116 Table 104 Profile element 11
33、7 Table 105 StepRepeat element118 Table 106 Package element.120 Table 107 Outline element .121 Table 108 LandPattern element .122 Table 109 SilkScreen element123 Table 110 AssemblyDrawing element.125 Table 111 Pin element .127 Table 112 Component element 128 Table 113 VplPackage element130 Table 114
34、 VplComponent element .132 Table 115 LogicalNet elements133 Table 116 PhyNetGroup element .134 Table 117 PhyNet element.134 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=NASA Marshall Space Flight Center/9972545001 Not for Resale, 03/06/2007 23:04
35、:15 MSTNo reproduction or networking permitted without license from IHS -,-,- 6 61182-2 IEC:2006(E) Table 118 LayerFeature element136 Table 119 Attribute element .139 Table 120 Pad element 139 Table 121 Fiducial .140 Table 122 BadBoardMark element .141 Table 123 GlobalFiducial element142 Table 124 G
36、oodpanelMark element143 Table 125 LocalFiducial element145 Table 126 Hole element.146 Table 127 Slot element 147 Table 128 Features element 147 Table 129 ColorGroup substitution group.148 Table 130 LineDescGroup substitution group.149 Table 131 DfxMeasurementList element 149 Table 132 DfxMeasurement
37、 element150 Table 133 Avl element .150 Table 134 AvlHeader element 151 Table 135 AvlItem element 152 Table 136 AvlVmpn element 152 Table 137 AvlMpn element.153 Table 138 AvlVendor element 154 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=NASA Mars
38、hall Space Flight Center/9972545001 Not for Resale, 03/06/2007 23:04:15 MSTNo reproduction or networking permitted without license from IHS -,-,- 61182-2 IEC:2006(E) 7 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PRINTED BOARD ASSEMBLY PRODUCTS MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY
39、Part 2: Generic requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions conc
40、erning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). The
41、ir preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates
42、closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the re
43、levant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that th
44、e technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maxim
45、um extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible
46、 for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical com
47、mittees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publi