《IEC-TR-62017-1-2001.pdf》由会员分享，可在线阅读，更多相关《IEC-TR-62017-1-2001.pdf（114页珍藏版）》请在三一文库上搜索。
1、TECHNICAL REPORT IEC TR 62017-1 First edition 2001-04 Documentation on design automation subjects Part 1: EDA Industry standards roadmap Documentation sur les sujets dautomatisation de la conception Partie 1: EDA Industry standards roadmap Reference number IEC/TR 62017-1:2001(E) Copyright Internatio
2、nal Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/2007 19:26:48 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications a
3、re issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base p
4、ublication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating
5、 to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publi
6、cation, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/catlg-e.htm) enables you to search by a variety of criteria including text searches, technical commi
7、ttees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/JP.htm) is also available by email. Please contact the Custome
8、r Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electro
9、technical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/2007 19:26:48 MSTNo reproduction or networking permitted without license from IHS -,-,- TECHNICAL REPORT IEC TR 62017-1 First edition 2001-04 Documentation on design
10、automation subjects Part 1: EDA Industry standards roadmap Documentation sur les sujets dautomatisation de la conception Partie 1: EDA Industry standards roadmap PRICE CODE IEC 2001 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,
11、 electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission3, rue de Varemb Geneva, Switzerland Telefax: +41 22 919 0300e-mail: inmailiec.ch IEC web site http:/www.iec.ch XA For price, see current catalo
12、gue Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/2007 19:26:48 MSTNo reproduction or networking
13、 permitted without license from IHS -,-,- Table of contents How This Book is Organized 10 1 Introduction 11 1.1 Charter .11 1.1.1 Identify the EDA Industry Requirements on EDA Systems 11 1.1.2 Review Status and Current Plans of Related Standards .11 1.1.3 Determine How to Coexist and Migrate to Impr
14、oved Standards .11 1.1.4 Identify Standards Areas Requiring Improvement .11 1.1.5 Develop a Roadmap to Future Standards .12 1.1.6 Deliver Recommendations and Roadmap Contributions .12 1.1.7 EDA Standards Industry Council .12 1.2 Background 13 1.2.1 Productivity Improvement 14 1.2.2 Complexity Manage
15、ment .14 1.2.3 Advanced Technology Development .14 1.2.4 Technology Development Funding 15 1.3 Scope .15 1.3.1 Electronic Design and Test Standards Focus .15 1.3.2 Technology Packages .16 1.3.3 Design Phases .16 1.3.4 Key Electronic Design and Test Interfaces 16 2 Executive Summary .17 2.1 Roadmaps
16、.17 2.1.1 Introduction to Roadmap 17 2.1.2 Overview of Design and Test Categories .18 2.1.3 Design System Roadmaps 18 2.1.4 Design Information Roadmaps .21 2.1.5 Key Electronic Design and Test Interface Roadmaps 23 2.2 Recommendations 23 TR 62017-1 IEC:2001(E) 2 How to Find the Information You Want
17、10 FOREWORD9 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/2007 19:26:48 MSTNo reproduction or networking permitted without license from IHS -,-,- 2.2.1 Key Roadmap Recommendations
18、23 2.2.2 Coexistence and Migration .27 2.2.3 Areas of Convergence 27 2.2.4 Areas of Acceleration of Work 29 2.2.5 Areas Where New Standards Work is Required 29 2.2.6 Areas Where Additional Roadmap Work is Required .30 2.3 The Standards Development Process .30 2.3.1 Current Standards Development Envi
19、ronment 30 2.3.2 Standards Development Process Recommendations 31 3 Electronic Design and Test Environment 35 3.1 Emerging Paradigm Shifts 35 3.1.1 Innovation in Systems Level Design (Architecture and High level Design Phases) .35 3.1.2 Innovation in Design Process Management .35 3.1.3 Increased Cod
20、esign Across Design Disciplines .35 3.1.4 New Architectural and Integration Concepts .35 3.1.5 Changing Business Practices 36 3.1.6 Pay-Per-View for Design Tools .36 3.2 Pressures on Designers and CAD Integrators 36 3.2.1 Exploit Multiple EDA Operating Environments 36 3.2.2 Use Diverse Databases and
21、 Formats 36 3.2.3 Use Tools from Multiple Tool Vendors .37 3.2.4 Enforce Design Methodologies and Process Management 37 3.2.5 Reduce (or Maintain) Cycle Time 37 3.2.6 Reduce Design Costs 37 3.2.7 Maximize Return-on-Investment (Price/Performance) 37 4 The Design System (Infrastructure and Tools) .39
22、4.1 Computing Environment and User Interface .39 4.1.1 Current Environment 39 4.1.2 Requirements 40 4.1.3 Recommendations 41 4.1.4 Roadmap - Computing Environment and User Interface .414 4.2 Design Tool Communication 42 4.2.1 Current Environment 42 4.2.2 Requirements 43 4.2.3 Recommendations 43 4.2.
23、4 Roadmap - Tool Communication .43 4.3 EDA System Extension Language 44 4.3.1 Current Environment 44 TR 62017-1 IEC:2001(E) 3 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/2007 19:2
24、6:48 MSTNo reproduction or networking permitted without license from IHS -,-,- 4.3.2 Requirements 44 4.3.3 Recommendations 45 4.3.4 Roadmap - EDA System Extension Language 46 4.4 EDA Standards-Based Software Development Environment. 46 4.4.1 Current Environment 46 4.4.2 Requirements 47 4.4.3 Recomme
25、ndations 47 4.4.4 Roadmap - EDA System Basic Software Development Environment 47 4.5 Intellectual Property Protection for Design Data Objects. 50 4.5.1 Current Environment 50 4.5.2 Requirements 50 4.5.3 Recommendations 51 4.5.4 Roadmap - Standards for Design Data Object Asset Protection 51 4.6 Desig
26、n Management . 51 4.6.1 Current Environment 51 4.6.2 Requirements 52 4.6.3 Recommendations 53 4.6.4 Roadmap - Design Management 54 4.7 Design Data Management. 54 4.7.1 Current Environment 55 4.7.2 Requirements 56 4.7.3 Recommendations 57 4.7.4 Roadmap - Design Data Management .57 4.8 Design Process
27、Metrics Management 57 4.8.1 Current Environment 58 4.8.2 Requirements 58 4.8.3 Recommendations 58 4.8.4 Roadmap - Design Process Metrics Management 58 4.9 Design Tool Management . 59 4.9.1 Current Environment 59 4.9.2 Requirements 60 4.9.3 Recommendations 61 4.9.4 Roadmap - Design Tool Management .6
28、2 4.10 Resource Management .63 4.10.1 Current Environment 63 4.10.2 Requirements 63 4.10.3 Recommendations 64 TR 62017-1 IEC:2001(E) 4 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/
29、2007 19:26:48 MSTNo reproduction or networking permitted without license from IHS -,-,- 4.10.4 Roadmap - Design Resource Management 64 5 The Design Information (Design Data Representation) .65 5.1 Common Topics Across All Design Information . .65 5.1.1 Incremental Processing 65 5.1.2 Hierarchical Pr
30、ocessing 67 5.1.3 Design Object Naming .68 5.2 Common Topics Across All Design Steps . .69 5.2.1 Timing Information 69 5.2.2 Simulation and Test Control 73 5.3 System Level Design . 75 5.3.1 Current Environment 75 5.3.2 Requirements 75 5.3.3 Recommendations 77 5.3.4 Roadmap - System Level Design .78
31、 5.4 Detailed Design 79 5.4.1 Current Environment 79 5.4.2 Requirements 80 5.4.3 Recommendations 86 5.4.4 Roadmap - Detailed Design .86 5.5 Design and Technology Re-use 88 5.5.1 Environment .88 5.5.2 Requirements 89 5.5.3 Recommendations 92 5.5.4 Roadmap - Design and Technology Re-Use 92 6 Key Elect
32、ronic Design and Test Interface. 96 6.1 Manufacturing Build Interface. .96 6.1.1 Current Environment 96 6.1.2 Requirements 96 6.1.3 Recommendations. .97 6.1.4 Roadmap - Manufacturing Build Interface 97 6.2 Manufacturing Test Interface 98 6.2.1 Current Environment 98 6.2.2 Requirements 98 6.2.3 Recom
33、mendations 99 6.2.4 Roadmap - Manufacturing Test Interface 99 6.3 Mechanical Design Interface .99 TR 62017-1 IEC:2001(E) 5 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/2007 19:26:4
34、8 MSTNo reproduction or networking permitted without license from IHS -,-,- 6.3.1 Current Environment 99 6.3.2 Requirements 99 6.3.3 Recommendations 100 6.3.4 Roadmap - Mechanical Design Interface .100 6.4 Software Design Interface .100 6.4.1 Current Environment 100 6.4.2 Requirements 101 6.4.3 Reco
35、mmendations 102 6.4.4 Roadmap - Software Design Interface .102 Appendix A - The Roadmap Working Groups .103 TR 62017-1 IEC:2001(E) 6 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/20
36、07 19:26:48 MSTNo reproduction or networking permitted without license from IHS -,-,- List of Tables Table 2.1: Areas of Recommended Standards Convergence 28 Table 2.2: Areas of Recommended Standards Acceleration 29 Table 2.3: Areas of Recommended New Standards Work . 29 Table 2.4: Areas of Recommen
37、ded Additional Roadmap Development 30 Table 5.1: Impact of Design Size on Design Processing Times. 81 Table A.1: EDA System Interoperability and Integration Working Group (EII) 105 Table A.2: Design and Data Management Working Group (DDM) . 106 Table A.3: Technology Libraries and Models Working Grou
38、p (TLM). 107 TR 62017-1 IEC:2001(E) 7 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/2007 19:26:48 MSTNo reproduction or networking permitted without license from IHS -,-,- List of F
39、igures Figure 2.1 Design System Roadma p 20 Figure 2.2 Design Information Roadmap 22 Figure 2.3 Key Design and Test Interfaces Roadmap . 23 Figure 2.4 The EDA Industry Standards Roadmap . 25 Figure 2.5 Vision of Standards Developmen t 33 Figure 4.1 Open EDA Enterprise Architectur e 49 Figure 4.2 Ope
40、n EDA Data Interoperability Architectur e50 TR 62017-1 IEC:2001(E) 8 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/07/2007 19:26:48 MSTNo reproduction or networking permitted without l
41、icense from IHS -,-,- INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DOCUMENTATION ON DESIGN AUTOMATION SUBJECTS Part 1: EDA Industry Standards Roadmap FOREWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical
42、 committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
43、entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with th
44、e International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subje
45、cts since each technical committee has representation from all interested National Committees. 3)The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by th
46、e National Committees in that sense. 4)In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the correspo
47、nding national or regional standard shall be clearly indicated in the latter. 5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that so
48、me of the elements of this technical report may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has collected data of a different kind from that which is