《IEC-60384-6-2005.pdf》由会员分享,可在线阅读,更多相关《IEC-60384-6-2005.pdf(34页珍藏版)》请在三一文库上搜索。
1、 INTERNATIONAL STANDARD IEC 60384-6 QC 300500 Third edition 2005-09 Fixed capacitors for use in electronic equipment Part 6: Sectional specification Fixed metallized polycarbonate film dielectric d.c. capacitors Reference number IEC 60384-6:2005(E) Copyright International Electrotechnical Commission
2、 Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 05:05:05 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in
3、 the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendm
4、ent 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including
5、 its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of
6、publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On
7、-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (s
8、ee below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commissio
9、n Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 05:05:05 MSTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IEC 60384-6 QC 300500 Third edition 2005-09 Fixed capacitors for use in el
10、ectronic equipment Part 6: Sectional specification Fixed metallized polycarbonate film dielectric d.c. capacitors IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and micro
11、film, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch U For price, see current catalogue PRICE CODE Com
12、mission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 05:05:05 MSTNo reproduction or networking permit
13、ted without license from IHS -,-,- 2 60384-6 IEC:2005(E) CONTENTS FOREWORD.3 1 General 6 1.1 Scope6 1.2 Normative references 6 1.3 Information to be given in a detail specification .7 1.4 Terms and definitions8 1.5 Marking .8 2 Preferred ratings and characteristics 9 2.1 Preferred characteristics .9
14、 2.2 Preferred values of ratings 9 3 Quality assessment procedures10 3.1 Primary stage of manufacture10 3.2 Structurally similar components.10 3.3 Certified records of released lots.10 3.4 Qualification approval10 3.5 Quality conformance inspection.17 4 Test and measurement procedures.18 4.1 Visual
15、examination and check of dimensions.18 4.2 Electrical tests.18 4.3 Robustness of terminations .22 4.4 Resistance to soldering heat .22 4.5 Solderability 22 4.6 Rapid change of temperature 23 4.7 Vibration23 4.8 Bump 23 4.9 Shock24 4.10 Climatic sequence.24 4.11 Damp heat, steady state25 4.12 Enduran
16、ce.25 4.13 Charge and discharge .26 4.14 Component solvent resistance.27 4.15 Solvent resistance of the marking27 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 05:05:05 MSTNo r
17、eproduction or networking permitted without license from IHS -,-,- 60384-6 IEC:2005(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 6: Sectional specification Fixed metallized polycarbonate film dielectric d.c. capacitors FOREWORD 1) The Interna
18、tional Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electro
19、nic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees;
20、 any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Stan
21、dardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has r
22、epresentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate,
23、 IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional pu
24、blications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with
25、 an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal
26、 injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative referen
27、ces cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for id
28、entifying any or all such patent rights. International Standard IEC 60384-6 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This third edition cancels and replaces the second edition published in 1987 and amendment 1 (1992) and constitutes a minor
29、revision related to tables, figures and references. The text of this standard is based on the following documents: FDIS Report on voting 40/1588/FDIS 40/1608/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This p
30、ublication has been drafted in accordance with the ISO/IEC Directives, Part 2. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 05:05:05 MSTNo reproduction or networking permitted
31、 without license from IHS -,-,- 4 60384-6 IEC:2005(E) The QC number that appears on the front cover of this publication is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ). IEC 60384 consists of the following parts, under the general title Fixed capacito
32、rs for use in electronic equipment: Part 1: Generic specification Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors Part 3: Sectional specification: Fixed tantalum chip capacitors Part 4: Sectional specification: Aluminium electrolytic capac
33、itors with solid and non- solid electrolyte Part 5: Sectional specification: Fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3 000 V Selection of methods of test and general requirements Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c. cap
34、acitors Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 Part 11: Blank detail specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors Assessment level
35、E Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil d.c. capacitors Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil d.c. capacitors Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and conn
36、ection to the supply mains Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors Part 17: Sectional specification: Fixed metallized polypropylene film dielectric
37、 a.c. and pulse capacitors Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric chip d.c. capacitors Part 20: Sectional specification: Fixed me
38、tallized polyphenylene sulfide film dielectric chip d.c. capacitors Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Part 23: Sectional
39、 specification: Fixed surface mount metallized polyethylene naphthalate film dielectric d.c. capacitors Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 05:05:05 MSTNo reproductio
40、n or networking permitted without license from IHS -,-,- 60384-6 IEC:2005(E) 5 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publi
41、cation. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this standard may be issued at a later date. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/111111
42、1001, User=Wing, Bernie Not for Resale, 03/10/2007 05:05:05 MSTNo reproduction or networking permitted without license from IHS -,-,- 6 60384-6 IEC:2005(E) FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 6: Sectional specification Fixed metallized polycarbonate film dielectric d.c. capacitors
43、1 General 1.1 Scope This part of IEC 60384 applies to fixed capacitors for direct current with metallized electrodes and polycarbonate dielectric for use in electronic equipment. These capacitors may have “self-healing properties“ depending on conditions of use. They are primarily intended for appli
44、cations where the a.c. component is small with respect to the rated voltage. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. Capacitors for electromagnetic interference and connection to the supply mains are not included but ar
45、e covered by IEC 60384-14. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applie
46、s. IEC 60063:1963, Preferred number series for resistors and capacitors Amendment 1 (1967) Amendment 2 (1977) IEC 60068-1: Environmental testing Part 1: General and guidance IEC 60384-1:1999, Fixed capacitors for use in electronic equipment Part 1: Generic specification IEC 60384-6-1, Fixed capacito
47、rs for use in electronic equipment Part 6-1: Blank detail specification Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E IEC 60384-14: Fixed capacitors for use in electronic equipment Part 14: Sectional specification: Fixed capacitors for electromagnetic interferen
48、ce suppression and connection to the supply mains IEC QC 001005: Register of Firms, Products and Services approved under the IECQ system, including ISO 9000 ISO 3:1973, Preferred numbers Series of preferred numbers Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 05:05:05 MSTNo reproduction or networking permitted without license fro