《IEC-PAS-62453-5-2006.pdf》由会员分享，可在线阅读，更多相关《IEC-PAS-62453-5-2006.pdf（84页珍藏版）》请在三一文库上搜索。
1、 PUBLICLY AVAILABLE SPECIFICATION IEC PAS 62453-5 Pre-Standard First edition 2006-05 Field Device Tool (FDT) interface specification Part 5: FOUNDATION FIELDBUS communication Reference number IEC/PAS 62453-5:2006(E) Copyright International Electrotechnical Commission Provided by IHS under license wi
2、th IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/08/2007 07:00:34 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, I
3、EC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication in
4、corporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in th
5、e IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also avai
6、lable from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also availab
7、le on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information
8、. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license w
9、ith IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/08/2007 07:00:34 MSTNo reproduction or networking permitted without license from IHS -,-,- PUBLICLY AVAILABLE SPECIFICATION IEC PAS 62453-5 Pre-Standard First edition 2006-05 Field Device Tool (FDT) interface specificatio
10、n Part 5: FOUNDATION FIELDBUS communication PRICE CODE IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. Int
11、ernational Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch XC For price, see current catalogue Commission Electrotechnique Internationale International Electrotechnica
12、l Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/08/2007 07:00:34 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 PAS 62453-5 IEC:2006 CONTENTS FO
13、REWORD.4 INTRODUCTION.6 1 Scope 7 2 Normative references .7 3 Solution concept.7 3.1 Overview.7 3.2 Unique identifier 11 3.2.1 Component categories .11 3.2.2 Bus category12 4 FF communication 13 4.1 Connection management .13 4.1.1 FMS connection.13 4.1.2 HSE connection .14 4.2 Abort.14 4.2.1 OnAbort
14、 indication .14 4.2.2 Abort request.15 4.3 Relation of FMS requests and FMS responses .15 4.4 Levels of support.16 5 Provided data.17 5.1 Interface IDtmParameter17 5.2 SingleDataAccess interfaces17 5.2.1 DTM 17 5.2.2 BTM 17 6 Protocol specific usage of XML attributes18 7 XML schemas and definitions1
15、9 7.1 DTM19 7.1.1 Topology scan schema.19 7.1.2 DTM FF schema 19 7.2 BTM 19 7.2.1 Parameter access - FF specific definitions19 7.3 Communication31 7.3.1 ChannelParameter Schema31 7.3.2 FF data type 32 7.3.3 FF FMS data types.33 7.3.4 H1 communication schema.36 7.3.5 HSE communication schema 37 7.3.6
16、 BTM DTM communication schema.39 7.4 Fieldbus management40 7.5 H1 management schema .40 7.5.1 HSE management schema .55 7.6 Fieldbus Foundation device identification .69 7.6.1 FDTFieldbusIdentSchema.xml69 BIBLIOGRAPHY .77 Copyright International Electrotechnical Commission Provided by IHS under lice
17、nse with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/08/2007 07:00:34 MSTNo reproduction or networking permitted without license from IHS -,-,- PAS 62453-5 IEC:2006 3 Figure 1 Example of System Architecture and Components 8 Figure 2 Object relations for H1 DeviceDTM.8
18、Figure 3 Object relations for HSE DTMs.10 Figure 4 Creation of an FMS connection 13 Figure 5 Termination of an FMS connection .14 Table 1 Explanation of object relations for H1 DeviceDTM9 Table 2 Explanation of object relations for HSE DTMs10 Table 3 Relation of FMS requests and FMS responses.15 Tab
19、le 4 Levels of support 16 Table 5 FF specific use of XML attributes.18 Table 6 List of the standard block parameter mnemonic .20 Table 7 Datatype definitions and mapping (structured types) 27 Table 8 Datatype definitions and mapping (simple types) .30 Table 9 FoundationFieldbusChannelParameterSchema
20、 attributes and elements 31 Table 10 FdtFFDataTypesSchema attributes.32 Table 11 FdtFFDataTypesSchema elements .33 Table 12 FdtFFFMSDataTypesSchema attributes33 Table 13 FdtFFFMSDataTypesSchema elements 34 Table 14 FdtFFH1CommunicationSchema attributes .36 Table 15 FdtFFH1CommunicationSchema element
21、s.37 Table 16 FdtFFHSECommunicationSchema attributes.38 Table 17 FdtFFHSECommunicationSchema elements 38 Table 18 BtmFFCommunicationSchema attributes and elements .39 Table 19 FDTFoundationFieldbusH1ManagementSchema attributes40 Table 20 FDTFoundationFieldbusH1ManagementSchema elements .46 Table 21
22、FDTFoundationFieldbusHSEManagementSchema attributes .55 Table 22 FDTFoundationFieldbusHSEManagementSchema elements60 Table 23 FDTFieldbusIdentSchema - attributes for Foundation Fieldbus H170 Table 24 FDTFieldbusIdentSchema - attributes for Foundation Fieldbus HSE 71 Table 25 FDTFieldbusIdentSchema -
23、 attributes for Foundation Fieldbus Blocks72 Table 26 FDTFieldbusIdentSchema - protocol independent attributes and elements75 Table 27 FieldbusScanTypeIdentSchema attributes and elements .75 Table 28 FieldbusDeviceTypeIdentSchema attributes and elements 76 Copyright International Electrotechnical Co
24、mmission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/08/2007 07:00:34 MSTNo reproduction or networking permitted without license from IHS -,-,- 4 PAS 62453-5 IEC:2006 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ Field Device Tool (FDT)
25、 interface specification Part 5: FOUNDATION FIELBUS communication FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote internation
26、al co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter refe
27、rred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate i
28、n this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an interna
29、tional consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonab
30、le efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Pu
31、blications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approv
32、al and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual exp
33、erts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC
34、Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC
35、Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. A PAS is a technical specification not fulfilling the requirements for a standard but made available to the public . IEC-PAS 62453-5 has been processed by subcommittee 65
36、C: Digital communications, of IEC technical committee 65: Industrial-process measurement and control. The text of this PAS is based on the following document: This PAS was approved for publication by the P-members of the committee concerned as indicated in the following document Draft PAS Report on
37、voting 65C/398A/NP 65C/411/RVN Following publication of this PAS, which is a pre-standard, the technical committee or subcommittee concerned will transform it into an International Standard. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employ
38、ees/1111111001, User=Wing, Bernie Not for Resale, 03/08/2007 07:00:34 MSTNo reproduction or networking permitted without license from IHS -,-,- PAS 62453-5 IEC:2006 5 This PAS shall remain valid for an initial maximum period of three years starting from 2006-05. The validity may be extended for a si
39、ngle three-year period, following which it shall be revised to become another type of normative document or shall be withdrawn. IEC 62453 consists of the following parts under the general title Field Device Tool (FDT) interface specification: Part 1: Concepts and detailed description Part 2: INTERBU
40、S communication Part 3: PROFIBUS communication Part 4: HART communication Part 5: FOUNDATION FIELDBUS communication Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/08/2007 07:00:34 MSTNo
41、 reproduction or networking permitted without license from IHS -,-,- 6 PAS 62453-5 IEC:2006 INTRODUCTION This PAS is an interface specification for developers of FDT components for Function Control and Data Access within a Client Server architecture. The specification is a result of an analysis and
42、design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that shall inter-operate seamlessly. With the integration of fieldbusses into control systems, there are a few other tasks which must be performed. This applies to fieldbusses in ge
43、neral. Although there are fieldbus- and device-specific tools, there is no unified way to integrate those tools into higher level system- wide planning or engineering tools. In particular, for use in extensive and heterogeneous control systems, typically in the area of the process industry, the unam
44、biguous definition of engineering interfaces that are easy to use for all those involved, is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manufacturer with its device. The DTM is integrated into engineering tools via the
45、 FDT interfaces defined in this specification. The approach to integration is in general open for all kind of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous control systems. Copyright International Electrotechnical Commission Provided by IHS
46、 under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/08/2007 07:00:34 MSTNo reproduction or networking permitted without license from IHS -,-,- PAS 62453-5 IEC:2006 7 Field Device Tool (FDT) interface specification Part 5: FOUNDATION FIELDBUS communication 1
47、 Scope This part of IEC 62435 provides information for integrating the FOUNDATION FIELDBUS (FF) protocol into the FDT interface specification (IEC 62453-1). This PAS describes communication schemas, protocol-specific extensions and the means for block (e.g. transducer, resource or function blocks) r
48、epresentation. The new protocol-specific XML schemas are based on FF specifications for H1 and HSE protocols. Furthermore, the schemas contain information about the device that is needed by systems to configure FF Devices. The focus of this part is Foundation Fieldbus device configuration. 2 Normative references The following referenced do