《IEC-TS-62143-2002.pdf》由会员分享，可在线阅读，更多相关《IEC-TS-62143-2002.pdf（32页珍藏版）》请在三一文库上搜索。
1、TECHNICAL SPECIFICATION IEC TS 62143 First edition 2002-07 Electrical installations for lighting and beaconing of aerodromes Aeronautical ground lighting systems Guidelines for the development of a safety lifecycle methodology Installations lectriques pour lclairage et le balisage des arodromes Syst
2、mes de balisage aronautique au sol Lignes directrices pour ltablissement dune mthodologie pour le cycle de vie de scurit Reference number IEC/TS 62143:2002(E) Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Berni
3、e Not for Resale, 03/09/2007 07:49:08 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated e
4、ditions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IE
5、C publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition t
6、o new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catal
7、ogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/catlg-e.htm) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and repla
8、ced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/JP.htm) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this pu
9、blication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for R
10、esale, 03/09/2007 07:49:08 MSTNo reproduction or networking permitted without license from IHS -,-,- TECHNICAL SPECIFICATION IEC TS 62143 First edition 2002-07 Electrical installations for lighting and beaconing of aerodromes Aeronautical ground lighting systems Guidelines for the development of a s
11、afety lifecycle methodology Installations lectriques pour lclairage et le balisage des arodromes Systmes de balisage aronautique au sol Lignes directrices pour ltablissement dune mthodologie pour le cycle de vie de scurit PRICE CODE IEC 2002 Copyright - all rights reserved No part of this publicatio
12、n may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919
13、 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch M For price, see current catalogue Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employe
14、es/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:49:08 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 TS 62143 IEC:2002(E) CONTENTS FOREWORD 3 INTRODUCTION 5 1Scope 6 2Normative references. 6 3Definitions 7 4Competence of persons . 8 4.1Objective 8 4.2Requi
15、rements . 8 5AGL safety management 8 5.1Objective 8 5.2Documentation 9 5.3AGL safety plan 9 5.4AGL safety assessment plan11 5.5Verification plan.12 5.6AGL safety case.12 6AGL system safety lifecycle.13 6.1Objectives13 6.2Requirements 13 7AGL system safety lifecycle phases in detail15 7.1Evaluation16
16、 7.2Technical solutions 17 7.3Realisation.18 7.4Planning 19 7.5Installation .20 7.6Commissioning 21 7.7Operations.21 7.8Decommissioning.22 Bibliography 25 Figure 1 AGL system safety lifecycle.15 Table 1 Summary of the AGL System Lifecycle Requirements.23 Copyright International Electrotechnical Comm
17、ission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:49:08 MSTNo reproduction or networking permitted without license from IHS -,-,- TS 62143 IEC:2002(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICAL INSTALLATIONS
18、FOR LIGHTING AND BEACONING OF AERODROMES AERONAUTICAL GROUND LIGHTING SYSTEMS GUIDELINES FOR THE DEVELOPMENT OF A SAFETY LIFECYCLE METHODOLOGY FOREWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical commi
19、ttees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrus
20、ted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the Inte
21、rnational Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects si
22、nce each technical committee has representation from all interested National Committees. 3)The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the Nati
23、onal Committees in that sense. 4)In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding
24、national or regional standard shall be clearly indicated in the latter. 5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of
25、the elements of this technical specification may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee
26、may propose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate p
27、ossibility of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC 62143, which is a technical specification, has been prepared by IEC technical committe
28、e 97: Electrical installations for the lighting and beaconing of aerodromes. The text of this technical specification is based on the following documents: Enquiry draftReport on voting 97/72/CDV97/83/RVC Full information on the voting for the approval of this technical specification can be found in
29、the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 3. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09
30、/2007 07:49:08 MSTNo reproduction or networking permitted without license from IHS -,-,- 4 TS 62143 IEC:2002(E) The committee has decided that the contents of this publication will remain unchanged until 2005-11. At this date, the publication will be reconfirmed; withdrawn, or replaced by an interna
31、tional standard. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:49:08 MSTNo reproduction or networking permitted without license from IHS -,-,- TS 62143 IEC:2002(E) 5 INTRODU
32、CTION Aeronautical ground lighting (AGL) at an aerodrome or heliport provides the pilots of aircraft on approach to or take-off from an aerodrome, and pilots of aircraft or drivers of vehicles moving on the aerodrome surface, with location, orientation and alignment information. An AGL system theref
33、ore provides a safety-related service and functions. In order to assure that the safety of the service and functions provided by the AGL system is adequately addressed, specific safety assessments should be performed at various instances during the lifecycle of the system. This technical specificati
34、on provides a methodology whereby this may be done. This technical specification is primarily concerned with the safety lifecycle of aeronautical ground lighting (AGL) systems. To conform to this technical specification it should be demonstrated to the relevant bodies that the requirements have been
35、 satisfied and therefore that the clause objective(s) has been met. NOTE 1 Examples of relevant bodies would include the following: aerodrome management; certification and licensing authorities; safety regulators; notified bodies for international or European directives; national standards bodies. N
36、OTE 2 This technical specification is based on the system and safety lifecycle methodology described in IEC 61508-1. IEC 61508, in all seven parts, provides a methodology to address the safety of safety-related systems and contains an abundance of guidance material, which may be applicable to an AGL
37、 system or may be of use to the reader of this technical specification. IEC 61508 contains requirements that are particularly relevant to risk reduction in a software-based AGL system. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/11
38、11111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:49:08 MSTNo reproduction or networking permitted without license from IHS -,-,- 6 TS 62143 IEC:2002(E) ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES AERONAUTICAL GROUND LIGHTING SYSTEMS GUIDELINES FOR THE DEVELOPMENT OF A
39、SAFETY LIFECYCLE METHODOLOGY 1 Scope This technical specification: outlines a methodology to address the safety at all lifecycle phases of an AGL system, including the evaluation, design, procurement, manufacture, installation, commissioning, operational use, maintenance, modification, and decommiss
40、ioning of the AGL system; NOTE 1 This document contains guidelines of a high-level, objective-based, and non-prescriptive nature. This is intended to permit a flexible approach to meeting the requirements. applies to an AGL system at an aerodrome or heliport which provides visual guidance to a pilot
41、 and is provided, operated and maintained by the aerodrome authority; NOTE 2 This document may apply to all or a part of an AGL system as required by the aerodrome authority. The equipment covered shall be defined and listed in the AGL safety case (see 5.6). Any subsequent addition or modification t
42、o the AGL system shall be notified as directed in 7.7.3. applies primarily to a new AGL system; NOTE It may also be applied to an existing AGL system or to an existing AGL system that is being modified; however, the relevant documentation for the project phases may not be available. Therefore, retro
43、spective action to cover the applicable lifecycle phases could be carried out or alternative means of providing safety information should be developed, e.g. historical data. covers all aspects of safety, including: operational (functional) safety of the AGL system; electrical safety for the installa
44、tion, maintenance and decommissioning of the AGL system; environmental safety and electromagnetic compatibility (EMC); health and safety at work. supports a regulatory regime based on the auditing of a safety management system at an aerodrome, where the safety management system provides documented e
45、vidence that safety has been or is being addressed at all phases of the lifecycle. This applies equally to a project to install AGL or the routine operational use and maintenance of the AGL. 2 Normative references The following referenced documents are indispensable for the application of this docum
46、ent. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60300-3-9, Dependability management Part 3: Application guide Section 9: Risk analysis of technological systems IEC 61508 (all part
47、s), Functional safety of electrical/electronic/programmable electronic safety- related systems IEC 61508-1, Functional safety of electrical/electronic/programmable electronic safety-related systems Part 1: General requirements Copyright International Electrotechnical Commission Provided by IHS under
48、 license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 07:49:08 MSTNo reproduction or networking permitted without license from IHS -,-,- TS 62143 IEC:2002(E) 7 IEC 61508-7, Functional safety of electrical/electronic/programmable electronic safety-related systems Part 7: Overview of techniques and measures IEC 61821, Electrical