《BS-4533-102.5-1990 EN-60598-2-5-1989.pdf》由会员分享，可在线阅读，更多相关《BS-4533-102.5-1990 EN-60598-2-5-1989.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS 4533-102.5: 1990 EN 60598-2-5: 1989 Incorporating Amendment No. 1 Luminaires Part 102: Particular requirements Section 102.5 Specification for floodlights This European Standard EN 60598-2-5:1989 has the status of a British Standard UDC: 628.974:628.9.041.6/.8:621.326/.327:621.3.
2、027.2/.4:620.1 Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 01:52:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 4533-102.5:1990 This British Standard was published under the authority of the Board of BSI and comes into effect on 28 September 1990 BSI 07-1999 First published August 1981
3、Second edition September 1990 The following BSI references relate to the work on this standard: Committee reference LGL/3 Draft for comment 77/24391 DC ISBN 0 580 35094 0 Cooperating organizations The European Committee for Electrotechnical Standardization (CENELEC), under whose supervision this Eur
4、opean Standard was prepared, comprises the National Committees of the following countries. AustriaItaly BelgiumLuxemburg DenmarkNetherlands FinlandNorway FrancePortugal GermanySpain GreeceSweden IcelandSwitzerland IrelandUnited Kingdom Amendments issued since publication Amd. No.Date of issueComment
5、s 8446February 1995Indicated by a sideline in the margin Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 01:52:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 4533-102.5:1990 BSI 07-1999i Contents Page Cooperating organizationsInside front cover National foreword ii Brief history2 Foreword2
6、Text of EN 60598-2-5 3 National appendix NA (informative)6 National appendix NB (informative)Inside back cover National appendix NC (informative) Inside back cover Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 01:52:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 4533-102.5:1990 ii BSI 07-
7、1999 National foreword This Section of BS 4533 has been prepared under the direction of the Electrical Illumination Standards Policy Committee and is the English language version of EN 60 598-2-5 “Luminaires Part 2:Particular requirements Section 5 Floodlights” including amendment A2 published by th
8、e European Committee for Electrotechnical Standardization (CENELEC). It was adopted by that organization from IEC Publication 598-2-5 (1979) edition 1 and Amendment No. 1 (1987), and amendment No. 2 (1993) which is identical with the European Standard. This British Standard supersedes BS 4533-102.5:
9、1981, which is withdrawn. The foreword and preface of IEC Publication 598-2-5 (1979) edition 1 and the preface of Amendment No. 1 (1987), which do not form part of the text of EN 60598-2-5, have been quoted in National appendix NA. Annexes designated “normative” are part of the body of the standard.
10、 Annexes designated “informative” are given for information only. National appendices are designated “informative”. In 5.1, 5.2, 5.12 and 5.13 where the words “section of Part 2 of IEC Publication 598”, “section of Part 2” and “section of Publication 598-2” appear they should be read as “section of
11、BS 4533”. In 5.1 and 5.2 where “Part 1” appears this should be read as “Part 101”. Where the words “Publication 598-1” appear they should be read as “BS 4533-101”. Cross-references. Details of other international publications quoted in this British Standard are given in Annex ZA. Where there are Bri
12、tish Standards corresponding to these international standards the relationships are given in National appendix NB. Product certification. Users of this British Standard are advised to consider the desirability of third party certification of product conformity with this British Standard based on tes
13、ting and continuing surveillance, which may be coupled with assessment of a suppliers quality systems against the appropriate Part of BS 5750. Enquiries as to the availability of third party certification schemes will be forwarded by BSI to the Association of Certification Bodies. If a third party c
14、ertification scheme does not already exist, users should consider approaching an appropriate body from the list of Association members. The foreword of the EN amendment A2 makes reference to “date of withdrawal (dow) of conflicting national standards” as “1995-03-01”. In this case the relevant natio
15、nal standard is BS 4533-102.5 but the “dow” relates only to those parts of the British Standard subject to Amendment No. 1. Certificates and marks will not be awarded after this date with respect to the British Standard not incorporating Amendment No. 1. They will be awarded with respect only to the
16、 amended British Standard. However, such certificates and marks already awarded with respect to the British Standard not incorporating Amendment No. 1 may continue to apply for production until 2000-03-01. A British Standard does not purport to include all the necessary provisions of a contract. Use
17、rs of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6, an insi
18、de back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 01:52:40 GMT+00:00 2006, Uncontrolled Copy, (c
19、) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60598-2-5 January 1989 + A2 June 1994 UDC 628.974:628.9.041.6/.8:621.326/.327:621.3.027.2/.4:620.1 Keywords: Particular requirements; floodlight Amendment A2 to the English version of EN 60598-2-5 Luminaires Part 2: Particular requirements S
20、ection 5: Floodlights (include amendment A2:1994) (IEC 598-2-5:1979 ed 1 + Amdt 1:1987) Luminaires Deuxime partie: Rgles particulires Section cinq Projecteurs (inclut lamendement A2:1994) (CEI 598-2-5:1979 ed 1 + Amdt 1:1987) Leuchten Teil 2: Besondere Anforderungen Hauptabschnitt fnf Flutlichtleuch
21、ten (enthlt nderungen A2:1994) (IEC 598-2-5:1979 Ausg. 1 + Amdt 1:1987) This European Standard was ratified by CENELEC on 13 September 1988. CENELEC members are bound to comply with the requirements of the CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
22、the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CENELEC Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English,
23、French and German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to CENELEC Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria
24、, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxemburg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee
25、fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1994 Copyright reserved to CENELEC members Ref. No. EN 60598-2-5:1989/A2:1994 E Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 01:52:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60598-2-5:1989 BSI 07-19
26、99 2 Brief history The CENELEC Questionnaire Procedure performed for finding out whether or not IEC 598-2-5 (first edition, 1979) as amended by Amendment No. 1 (1987) could be accepted without textual changes, has shown that no common modifications were necessary for the acceptance as European Stand
27、ard (EN). The Reference Document was submitted to the CENELEC members for formal vote and acceptance by CENELEC. Technical text The text of the International Standard IEC 598-2-5 (first edition, 1979) as amended by Amendment No. 1 (1987) was approved by CENELEC on 1988-09-13 as a European Standard.
28、Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given only for information. In this European Standard, Annex ZA is normative. The following dates were fixed: Foreword At the request of the CENELEC Technical Committee TC 34Z, Luminaires and as
29、sociated equipment, amendment 2:1993 to the International Standard IEC 598-2-5:1979 was submitted to the CENELEC Unique Acceptance Procedure (UAP) in May 1993 for acceptance as a European Standard. The text of the International Standard was approved by CENELEC as amendment A2 to EN 60598-2-5 on 8 Ma
30、rch 1994. The following dates were fixed: For products which have complied with EN 60598-2-5:1989 before 1995-03-01 as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until 2000-03-01. Contents Page Brief history2 Foreword2 5.1Scope3
31、5.2General test requirements3 5.3Definitions3 5.4Classification of luminaires3 5.5Marking3 5.6Construction3 5.7Creepage distances and clearances4 5.8Provision for earthing4 5.9Terminals4 5.10 External and internal wiring4 5.11 Protection against electric shock4 5.12 Endurance tests and thermal tests
32、4 5.13 Resistance to dust and moisture4 5.14 Insulation resistance and electric strength4 5.15 Resistance to heat, fire and tracking4 Annex ZA (normative) Other international publications quoted in this standard 5 date of announcement(doa) 1989-04-01 date of latest publication(dop) 1989-10-01 date o
33、f withdrawal of conflicting national standard(dow) 1990-04-01 latest date of publication of an identical national standard(dop) 1995-03-01 latest date of withdrawal of conflicting national standards (dow) 1995-03-01 Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 01:52:40 GMT+00:00 2006, Unco
34、ntrolled Copy, (c) BSI EN 60598-2-5:1989 BSI 07-19993 5.1 Scope This section of Part 2 of IEC Publication 598 specifies requirements for floodlights for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1 000 V. It is to be read in conjunction
35、 with those sections of Part 1 to which reference is made. 5.2 General test requirements The provisions of Section 0 of Publication 598-1 apply. The tests described in each appropriate section of Part 1 shall be carried out in the order listed in this section of Part 2. 5.3 Definitions For the purpo
36、ses of this section, the definitions of Section 1 of Publication 598-1 apply together with the following definitions: 5.3.1 floodlighting the lighting by projection of the whole of a scene or subject to an illuminance significantly greater than that of its surroundings NOTEThe difference in illumina
37、tion between the subject and its surroundings may, alternatively, be achieved by colour. 5.3.2 floodlight a luminaire for floodlighting NOTEA floodlight may be for either exterior or interior use or for both. 5.4 Classification of luminaires Floodlights shall be classified in accordance with the pro
38、visions of Section 2 of Publication 598-1. 5.5 Marking The provisions of Section 3 of Publication 598-1 apply. Where necessary to ensure proper use and maintenance, the following additional particulars shall also be marked on the floodlight or otherwise made available to the purchaser: a) Operating
39、position, if not universal. b) Weight and overall dimensions of the floodlight. c) Maximum projected area of the floodlight. d) Range of mounting heights. e) Suitability for use indoors. 5.6 Construction The provisions of Section 4 of Publication 598-1 apply together with the requirements of Sub-cla
40、uses 5.6.1 to 5.6.6. 5.6.1 Floodlights for use outdoors shall have protection against the ingress of moisture at least equivalent to IP X3. 5.6.2 Lampholder brackets and lamp supports where used shall withstand normal usage throughout the life of the floodlight. They shall accept and retain lamps wh
41、ich are within the dimensional tolerances stated in the appropriate IEC publication where applicable, and locate the lamp or lamps in the designed relationship to the optical control devices in the floodlight. 5.6.3 When provision is made for alternative sizes of lamps or light centre positions, the
42、 adjusting means shall be positive and firmly retained in the selected position. 5.6.4 Refractors, reflectors or any other light controlling components shall be so marked or constructed that they can be fitted or replaced only in the correct relationship to the light source. 5.6.5 The means for atta
43、ching the floodlight to its support shall be appropriate to the weight of the floodlight. For floodlights for use above ground level outdoors, the connection shall withstand wind speeds of 150 km/h on the projected surface of the floodlight assembly without undue deflection. Fixings which carry the
44、weight of the floodlight and internal accessories shall be provided with appropriate means to prevent the dislodgement of any part of the floodlight by vibration, either in service or during maintenance. Parts of floodlights for mounting heights 3 m or higher which are fixed other than with at least
45、 two devices, for example, screws or equivalent means of sufficient strength, shall have such extra protection as to prevent those parts falling and endangering persons, animals and surroundings, if a fixing device fails under normal conditions. The points of attachment which allow the floodlight to
46、 rotate and which are tested in sub-clause 5.6.5.1 are excluded from the requirements of this paragraph. Compliance shall be checked by inspection and, for floodlights for use above ground level outdoors, by the additional test of sub-clause 5.6.5.1. 5.6.5.1 The floodlight is mounted with its larges
47、t projected area as viewed in elevation lying in the horizontal plane, and with the means of attachment secured in accordance with the manufacturers recommendations. Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 01:52:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60598-2-5:1989 4 BSI 07-
48、1999 For floodlights for use above ground level outdoors, a constant evenly distributed load is applied for 10 in on the floodlight using sand-bags providing 2.4 kN per square metre of floodlight projected area. The floodlight is then turned 180, in the vertical plane, about the point of attachment
49、and the test is repeated. During the test there shall be no failure or movement about the point of attachment and after either part of this test there shall be no permanent set exceeding 1. 5.6.6 Where means for angular adjustment are provided, there shall be provision for positive locking after any such adjustments have been effected. 5.6.7 Floodlights for use outdoors shall be resistant to the vibrations which may occur during normal use. 5.6.8 Glass covers shall either consist of a glass that fractures into small pieces, or shall be provi