《BS-5649-5-1982 EN-40-5-1982.pdf》由会员分享，可在线阅读，更多相关《BS-5649-5-1982 EN-40-5-1982.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS 5649-5: 1982 EN 40-5 Lighting columns Part 5: Specification for base compartments and cableways This European Standard EN 40-5 was given, as from 29 October 1982 the status of a British Standard and will replace the relevant requirements of BS 1308, BS 1840 and BS 3989 (see natio
2、nal foreword) UDC 624.971:628.971:621.315.68:621.315.3 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-5:1982 This British Standard was published under the authority of the Board of BSI and comes into effect on 29 October 1982 BSI 07
3、-1999 The following BSI references relate to the work on this standard: Committee reference RDB/28 Draft for comment 78/11996 DC ISBN 0 580 12895 4 Cooperating organizations The European Committee for Standardization, under whose supervision this European Standard was prepared, comprises the nationa
4、l standards organizations of the following Western European countries: Austriasterreichisches Normungsinstitut BelgiumInstitut Belge de Normalisation DenmarkDansk Standardiseringsraad FinlandSuomen Standardisoimisliitto, r.y. FranceAssociation Franaise de Normalisation GermanyDeutsches Institut fr N
5、ormung E.V. IrelandInstitute for Industrial Research and Standards ItalyEnte Nazionale Italiano di Unificazione NetherlandsNederlands Normalisatie-instituut NorwayNorges Standariseringsforbund PortugalRepartio de Normalizao SpainInstituto Nacional de Racionalizacin y Normalizacin SwedenStandardiseri
6、ngskommissionen i Sverige SwitzerlandAssociation Suisse de Normalisation United KingdomBritish Standards Institution Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-5:
7、1982 BSI 07-1999i Contents Page Cooperating organizationsInside front cover National forewordii Brief history2 Foreword2 1 Scope and field of application3 2 References3 3 Base compartments and cableways3 4 Protection category3 5 Earthing terminals3 National appendix A4 Publications referred toInside
8、 back cover Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-5:1982 ii BSI 07-1999 National foreword BS 5649 will be issued in Parts as they are completed and approved, and until the first nine Parts are published it will not be possi
9、ble to supersede the present British Standards for lighting columns. As the Parts are issued recommendations will be given for their implementation together with a list of clauses in the existing standards which they will eventually supersede. It is hoped that a gradual change-over will be obtained
10、which will terminate with the total withdrawal of the existing standards. The British Standards affected by BS 5649-5 are BS 1308, BS 1840 and BS 3989, specifications for concrete, steel and aluminium street lighting columns respectively. It is anticipated that the affected clauses in the existing s
11、tandards will be withdrawn in accordance with the following timetable: BS 1840 and BS 3989: One year from the publication of this Part of this standard BS 1308: Three years from date of the last Part published, of Parts 3 to 9 of this standard BS 5649-5 covers some or all of the requirements also co
12、vered in the following clauses of the existing British Standards. It should be noted that the work on the further Part, dealing with special requirements for plastics columns and mentioned in the CEN foreword, is not now to proceed. BS 1308 1.12.1Door and door opening 1.12.2Baseboard for the control
13、 gear 1.13Earthing 1.14Breather holes 1.17Bore 1.18Service connections 1.22Marking of columns 1.23Information to be supplied with the enquiry or order BS 1840 6Doors and door openings 7Baseboards for control gear 9Earthing 10Service slots 14Tops of columns 20Information to be supplied by the purchas
14、er BS 3989 5Marking 8Control gear compartment 10Earthing 11Service slot 20Information to be supplied by the purchaser Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-5:1982 BSI 07-1999iii Clause 3.2 refers to EN 40-3 which was not ap
15、proved by the UK. However, the UK abstention vote was intended to enable the UK to add welding requirements to Part 3. The technical requirements in EN 40-3 are identical with those in clauses 1 to 6 of BS 5649-3:1982. NOTEThe titles of the publications referred to in this standard are listed on the
16、 inside back cover. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This
17、 document comprises a front cover, an inside front cover, pages i to iv, the EN title page, pages 2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside f
18、ront cover. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 40-5 Edition
19、 1 February 1982 UDC 624.971:628.971:621.315.68:621.315.3 Key words: Street lighting, lighting equipment, lighting columns, electric cables, ports (openings), climatic protection, electrical grounding, marking English version Lighting columns Part 5: Base compartments and cableways Candlabres dclair
20、age public Compartiments lectriques et passages des cables Lichtmaste Rume fr elektrische Anschlsse und Leitungswege This European Standard was accepted by CEN on 1980-10-23. The CEN members are bound to adhere to the CEN Internal Regulations which specify under which conditions this European Standa
21、rd has to be given, without any alteration, the status of a national standard. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Central Secretariat or to any CEN member. This European Standard is established by CEN in three
22、official versions (English, French, German). A translation made by another member under its own responsibility, in its own language, and notified to CEN has the same status. CEN members are the national standards organizations of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland,
23、Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels Copyright reserved to all CEN members Licensed Copy:
24、sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 40-5 BSI 07-1999 2 Brief history This European Standard was drawn up by the Technical Committee CEN/TC 50 “Lighting columns and spigots”, the Secretariat of which is held by BSI. This European Standard was
25、 adopted by CEN on the strength of its acceptance by the following member countries: Denmark, Greece, Italy, Netherlands, Portugal, Spain, Switzerland, United Kingdom. Foreword This European Standard was drawn up by the member countries of CEN/TC 50, Austria, Belgium, France, Germany, Italy, Netherl
26、ands, Switzerland and United Kingdom (Secretariat). The standard EN 40 “Lighting columns” consists of the following Parts: Part 1: Definitions and terms; Part 2: Dimensions and tolerances; Part 3: Materials; Part 4: Surface protection of metal lighting columns; Part 5: Base compartments and cableway
27、s; Part 6: Design loads; Part 7: Verification of structural design by calculation;1) Part 8: Verification of structural design by testing; Part 9: Special requirements for reinforced and prestressed concrete lighting columns. A further Part dealing with special requirements for plastics columns is i
28、n preparation. 1) At present still a draft. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 40-5 BSI 07-19993 1 Scope and field of application This European Standard specifies the requirements for base compartments, cableways and earthing
29、 terminals of lighting columns having nominal heights u 20 m for post top columns and u 18 m for columns with brackets. 2 References EN 40-3:1982, Lighting columns Part 3: Materials. IEC 529:1976, Classification of degrees of protection provided by enclosures. 3 Base compartments and cableways 3.1 C
30、ompartment dimensions. When a base compartment is supplied its free space, height, width and depth dimensions shall be stated by the manufacturer. 3.2 Compartment door. The door shall be made from materials specified in EN 40-3 and shall be corrosion resistant or corrosion protected. On metal column
31、s the door shall be protected to an equivalent degree of protection to that provided on the column. It shall resist unauthorized entry and damage by vandals which might cause an electrically unsafe situation. The door shall be fitted in a manner that complies with the protection category IP 33 in IE
32、C Publication 529. 3.3 Attachment of electrical equipment. The compartment shall be provided with means of attaching electrical equipment. This attachment shall accord with the national practice of the country in which the column is to be installed. Where a metal tray is used, it shall be of corrosi
33、on resistant material or be protected against corrosion. Where a baseboard is used, it shall be manufactured from material which is substantially non-hygroscopic and rot resistant. 3.4 Electrical cableways. Cableways from the base compartment to the lantern connection shall be a minimum of 18 mm con
34、taining diameter unless otherwise agreed between purchaser and supplier. Cableways from the cable entry slot to the base compartment shall be a minimum of 50 mm containing diameter. All cableways shall be smooth and free from obstruction with no sharp edges, flashes, burrs and the like which might c
35、ause abrasion of the cables. 4 Protection category Parts of the column above ground level not covered by 3.2 shall comply with the protection category IP 23 in IEC Publication 529 when assembled in accordance with the manufacturers instructions. 5 Earthing terminals Where columns are to be earthed b
36、y means of an earthing terminal on the column or baseboard, the following requirements shall apply. The earthing terminal provided shall be corrosion resistant, shall have substantial contact surfaces for the attachment of an earthing conductor and shall be readily accessible. Except for doors there
37、 shall be reliable electrical contact between all exposed metal parts of the column and bracket where fitted, and the earthing terminal (this does not include the metal reinforcement in concrete columns). Whether or not this contact includes the door shall accord with the national practice of the co
38、untry in which the column is to be installed. The attachment of the fixed part of the terminal shall be designed and executed so as to prevent it from being rotated when the clamping part is moved. If the fixed part of the terminal consists of a bolt its dimensions shall not be less than M8. The cla
39、mping part shall be designed so as to avoid any damage to the earth conductor or its insulation during tightening or loosening. The earthing terminal, or the column or baseboard adjacent to the terminal, shall be distinctly and durably marked with the symbol N. Licensed Copy: sheffieldun sheffieldun
40、, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-5:1982 4 BSI 07-1999 National appendix A The UK participation in the preparation of this European Standard came under the direction of the Road Engineering Standards Committee of BSI. The following organizations were involv
41、ed in the work on this standard: Aluminium Federation British Precast Concrete Federation Ltd. British Steel Industry Cement and Concrete Association County Surveyors Society Department of Transport Design Council Electricity Supply Industry in England and Wales Institution of Highway Engineers Inst
42、itution of Mechanical Engineers Institution of Municipal Engineers Institution of Public Lighting Engineers Lighting Column Manufacturers Association Lighting Industry Federation Ltd. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-5
43、:1982 BSI 07-1999 Publications referred to BS 1308, Concrete street lighting columns2). BS 1840, Steel columns for street lighting2). BS 3989, Aluminium street lighting columns2). EN 40, Lighting columns3). BS 5649-1, Definitions and terms. BS 5649-2, Dimensions and tolerances. BS 5649-3, Specificat
44、ion for materials and welding requirements4). BS 5649-4, Recommendations for surface protection of metal lighting columns. BS 5649-5, Specification for base compartments and cableways. BS 5649-6, Specification for design loads. BS 5649-7, Method for verification of structural design by calculation5)
45、. BS 5649-8, Method for verification of structural design by testing. BS 5649-9, Specification of special requirements for reinforced and prestressed concrete lighting columns. IEC 529, Classification of degrees of protection provided by enclosures (BS 5490 is identical with IEC 529). 2) Referred to
46、 in the national foreword only. 3) Referred to in the foreword only. 4) BS 5649-3 includes an additional (national) clause concerning welding; it is otherwise technically equivalent to EN 40-3 (see foreword of BS 5649-3 for details). 5) At present still a draft. Licensed Copy: sheffieldun sheffieldu
47、n, na, Mon Dec 04 16:31:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-5: 1982 EN 40-5 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe an
48、d at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products a
49、nd services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addres