《BS-5649-4-1982 EN-40-4-1982.pdf》由会员分享，可在线阅读，更多相关《BS-5649-4-1982 EN-40-4-1982.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS 5649-4: 1982 EN 40-4 Lighting columns Part 4: Recommendations for surface protection of metal lighting columns This European Standard EN 40-4 was given, as from 29 October 1982 the status of a British Standard and will replace the relevant requirements of BS 1308, BS 1840 and BS
2、3989 (see national foreword). UDC 624.971034:628.971:620.197 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-4:1982 This British Standard was published under the authority of the Board of BSI and comes into effect on 29 October 1982
3、BSI 02-1999 The following BSI references relate to the work on this standard: Committee reference RDB/28 Draft for comment 77/10566 DC ISBN 0 580 12887 3 Cooperating organizations The European Committee for Standardization, under whose supervision this European Standard was prepared, comprises the n
4、ational standards organizations of the following Western European countries: Austriasterreichisches Normungsinstitut BelgiumInstitut Belge de Normalisation DenmarkDansk Standardiseringsraad FinlandSuomen Standardisoimisliitto, r.y. FranceAssociation Franaise de Normalisation GermanyDeutsches Institu
5、t fr Normung E.V. IrelandInstitute for Industrial Research and Standards ItalyEnte Nazionale Italiano di Unificazione NetherlandsNederlands Normalisatie-instituut NorwayNorges Standariseringsforbund PortugalRepartio de Normalizao SpainInstituto Nacional de Racionalizacin y Normalizacin SwedenStandar
6、diseringskommissionen i Sverige SwitzerlandAssociation Suisse de Normalisation United KingdomBritish Standards Institution Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5
7、649-4:1982 BSI 02-1999i Contents Page Cooperating organizationsii National forewordInside front cover Brief history2 Foreword2 1Scope and field of application3 2References3 3Areas of the column for corrosion protection3 4Corrosion protection for steel lighting columns3 5Corrosion protection of alumi
8、nium alloy lighting columns4 National appendix A5 National appendix B5 Publications referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-4:1982 ii BSI 02-1999 National foreword BS 5649 will be issued in Parts
9、as they are completed and approved, and until the first nine Parts are published it will not be possible to supersede the present British Standards for lighting columns. As the Parts are issued recommendations will be given for their implementation together with a list of clauses in the existing sta
10、ndards which they will eventually supersede. It is hoped that a gradual change-over will be obtained which will terminate with the total withdrawal of the existing standards. The British Standards affected by BS 5649 are BS 1308, BS 1840 and BS 3989, specifications for concrete, steel and aluminium
11、street lighting columns respectively. It is anticipated that the affected clauses in BS 1840 and BS 3989 will be withdrawn one year from the date of publication of this Part of this standard: BS 1308 is not affected by this Part of this standard. BS 5649-4 covers the requirements of clause 16 in BS
12、1840 and clause 7 in BS 3989. It should be noted that the work on the further Part, dealing with special requirements for plastics columns and mentioned in the CEN foreword, is not now to proceed. National appendix B lists the British Standards which relate to EN 40-4. NOTE The titles of the publica
13、tions referred to in this standard are listed on the inside back cover. Convention. In this European Standard the comma has been used as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. A British Standard does not purport to inc
14、lude all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, page
15、s i and ii, the EN title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Mon D
16、ec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 40-4 Edition 1 February 1982 UDC 624.971034:628.971:620.197 Key words: Luminaire, lighting column, street lighting, corrosion prevention, metal finishing English version Lighting columns Pa
17、rt 4: Surface protection of metal lighting columns Candlabres dclairage public Protection de surface des candlabres dclairage public mtalliques Lichtmaste Oberflchenschutz fr Lichtmaste aus Metall This European Standard was accepted by CEN on 1980-08-20. The CEN members are bound to adhere to the CE
18、N Internal Regulations which specify under which conditions this European Standard has to be given, without any alteration, the status of a national standard. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Central Secretar
19、iat or to any CEN member. This European Standard is established by CEN in three official versions (English, French, German). A translation made by another member under its own responsibility, in its own language, and notified to CEN has the same status. CEN members are the national standards organiz
20、ations of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue Brder
21、ode 2 B-1000 Brussels Copyright reserved to all CEN members Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 40-4 BSI 02-1999 2 Brief history This European Standard was drawn up by the Technical Committee CEN/TC 50 “Lighting columns and sp
22、igots”, the Secretariat of which is held by BSI. This European Standard was adopted by CEN on the strength of its acceptance by the following member countries: Belgium, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Switzerland, United Kingdom. Foreword This European Standard was draw
23、n up by the member countries of CEN/TC 50, Austria, Belgium, France, Germany, Italy, Netherlands, Switzerland and United Kingdom (Secretariat). The standard EN 40 “Lighting columns” consists of the following Parts: Part 1: Definitions and terms; Part 2: Dimensions and tolerances; Part 3: Materials;
24、Part 4: Surface protection of metal lighting columns; Part 5: Base compartments and cableways; Part 6: Design loads; Part 7: Verification of structural design by calculation1); Part 8: Verification of structural design by testing; Part 9: Special requirements for reinforced and prestressed concrete
25、lighting columns. A further Part dealing with special requirements for plastics columns is in preparation. 1) At present still a draft. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 40-4 BSI 02-19993 1 Scope and field of application Thi
26、s European Standard gives recommendations for methods of corrosion protection of lighting columns after fabrication. It applies to post top columns 2 to 545065 Area A: a coat of primer (with corrosion protection pigment) non-mandatory Area B: a coat of primer (with corrosion protection pigment) or a
27、 coat of bitumen Area C: a coat of bitumen Area A: a coat of primer (with corrosion protection pigment) Area B: a coat of primer (with corrosion protection pigment) or a coat of bitumen Area C: a coat of bitumen Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontro
28、lled Copy, (c) BSI EN 40-4 4 BSI 02-1999 4.4 Painting. The preparation of the surfaces of the areas A and B to receive the coating should be by blast cleaning to grade Sa 2 of Swedish Standard SIS 05 5900. Subsequently the following should be applied: the following should be applied: 5 Corrosion pro
29、tection of aluminium alloy lighting columns Aluminium alloy columns with the exception of the ground section are customarily delivered in the natural condition. The following surface treatment should be carried out: Area A: a coat of primer (with corrosion protection pigment) Area B: a coat of prime
30、r (with corrosion protection pigment) and/or a coat of bitumen Area C: a coat of bitumen Area A: None Area B: Non-porous, electrically insulating bitumen containing coating with a minimum layer thickness of 250 m. The coating should only be applied after degreasing and an appropriate preliminary tre
31、atment to ensure adhesion Area C: Area C: No surface treatment is necessary with the exception of the ground section where protection should be applied as for area B Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5649-4:1982 BSI 02-19995
32、 National appendix A The UK participation in the preparation of this European Standard came under the direction of the Road Engineering Standards Committee of BSI. The following organizations were involved in the work on this standard: Aluminium Federation British Precast Concrete Federation Ltd. Br
33、itish Steel Industry Cement and Concrete Association County Surveyors Society Department of Transport Design Council Electricity Supply Industry in England and Wales Institution of Highway Engineers Institution of Mechanical Engineers Institution of Municipal Engineers Institution of Public Lighting
34、 Engineers Lighting Column Manufacturers Association Lighting Industry Federation Ltd. National appendix B There are no British Standard direct equivalents to the ISO and SIS standards quoted in this document. Guidance on the expected lives of the protection systems covered by clause 4 of this stand
35、ard, and alternative protection systems, is given in DD 24 and BS 5493. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 6 blank Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 564
36、9-4:1982 BSI 02-1999 Publications referred to BS 1308, Concrete street lighting columns2). BS 1840, Steel columns for street lighting2). BS 3989, Aluminium street lighting columns2). BS 5493, Code of practice for protective coating of iron and steel structures against corrosion. DD 24, Recommendatio
37、ns for methods of protection against corrosion on light section steel used in building. EN 40 (BS 5649), Lighting columns3). EN 40-1 (BS 5649), Definitions and terms. EN 40-2 (BS 5649), Dimensions and tolerances. EN 40-3 (BS 5649), Specification for materials and welding requirements4). EN 40-4 (BS
38、5649), Recommendations for surface protection of metal lighting columns. EN 40-5 (BS 5649), Specification for base compartments and cableways. EN 40-6 (BS 5649), Specification for design loads. EN 40-7 (BS 5649), Method for verification of structural design by calculation5). EN 40-8 (BS 5649), Metho
39、d for verification of structural design by testing. EN 40-9 (BS 5649), Specification of special requirements for reinforced and prestressed concrete lighting columns. ISO 1459, Metallic coatings Protection against corrosion by hot dip galvanizing Guiding principles. ISO 1460, Metallic coatings Hot d
40、ip galvanized coatings on ferrous materials Determination of the mass per unit area Gravimetric method. ISO 1461, Metallic coatings Hot dip galvanized coatings on fabricated ferrous products Requirements. ISO 2063, Metallic coatings Protection of iron and steel against corrosion Metal spraying of zi
41、nc and aluminium. SIS 05 5900, Pictorial surface preparation standards for painting steel surfaces. Copies of these British, ISO and Swedish standards may be purchased in the UK from the BSI Sales Department or consulted in the BSI Library. 2) Referred to in the national foreword only. 3) Referred t
42、o in the foreword only. 4) BS 5649-3 includes an additional (national) clause concerning welding; it is otherwise technically equivalent to EN 40-3 (see foreword of BS 5649-3 for details). 5) At present still a draft. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:30:55 GMT+00:00 2006, Un
43、controlled Copy, (c) BSI BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
44、| | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amend
45、ment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard wo
46、uld inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest edition
47、s of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that h
48、ave been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are al
49、so available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publica