《ISO-3108-1974.pdf》由会员分享,可在线阅读,更多相关《ISO-3108-1974.pdf(3页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXYHAPOAHAR OPl-AHM3Al41?R II0 CTAHAAPTFi3AU.ORGANISATION INTERNATIONALE DE NORMALISATION Steel wire ropes for general purposes - Determination of actual breaking load Gbles en acier pour usages courants - D the remaining load s
2、hall be applied slowly, at a rate of application of stress of approximately IO MPa per second. 4.2 The actual breaking load is reached when no further increase of the load is possible. 4.3 Tests in which breaking occurs inside or adjacent to the grips may be discarded at the option of the manufactur
3、er in cases where the minimum breaking load is not reached. 5 TEST REPORT The test report shall include the following particulars : a) the reference to the method used, that is, this International Standard; b) the results (in terms of magnitude and unit); c) any unusual features noted during the tes
4、t; d) any operation not included in this International Standard or regarded as optional. 1 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 09:47:20 MDTNo reproduction or networking permitted without license from IHS -,-,-