《ISO-5699-1979.pdf》由会员分享，可在线阅读，更多相关《ISO-5699-1979.pdf（3页珍藏版）》请在三一文库上搜索。
1、INTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXjlYHAPOnHAR OPrAHMJAUHR n0 CTAHAPTW3AUAW.ORGANlSATlON INTERNATIONALE DE NORMALlSATlON Agricultural machines, implements and equipment - Dimensions for mechanical loading with bulk goods Matkriels agricoles, instruments et Bqui
2、pements - Dimensions pour le chargement mkanique des produits en vrac First edition - 1979-04-15 iii UDC 531.3 : 521.959.3 Ref. No. IS0 5599-1979 (E) a 2 Descriptors : agricultural machinery, materials handling equipment, bulk products, loading, dimensions, height, width. 8 s Price based on 1 page C
3、opyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 09:36:15 MDTNo reproduction or networking permitted without license from IHS -,-,- FOREWORD IS0 (the International Organization for
4、 Standardization) is a worldwide federation of national standards institutes (IS0 member bodies). The work of developing International Standards is carried out through IS0 technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to
5、 be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as Internatio
6、nal Standards by the IS0 Council. International Standard IS0 5699 was developed by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, and was circulated to the member bodies in January 1978. It has been approved by the member bodies of the following countries : Austr
7、alia Austria Bulgaria Canada Chile Denmark Germany, F.R. India Iran Spain Italy Switzerland Korea, Dem. P. Rep. of Turkey Mexico United Kingdom New Zealand USA Poland USSR Romania Yugoslavia South Africa, Rep. of The member bodies of the following countries expressed disapproval of the document on t
8、echnical grounds : Belgium Czechoslovakia France Sweden Q International Organization for Standardization, 1979 ? Printed in Switzerland Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25
9、/2007 09:36:15 MDTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IS0 5699-1979 (E) Agricultural machines, implements and equipment - Dimensions for mechanical loading with bulk goods 1 SCOPE This International Standard specifies the maximum admissible h
10、eight and width dimensions for machines, implements and equipment which are engaged in mech- anical loading procedures. This International Standard represents a recommendation for the production of hoisting devices, transporters and stores for bulk goods. 2 FIELD OF APPLICATION This International St
11、andard applies to agricultural machines, implements and transporters equipped with a hopper for bulk goods and which are loaded mechanically. Aircraft are excluded. The recommended gateway heights and gateway widths, for example for silos and gateways, result from the height and width dimensions for
12、 machines and implements. 3 DEFINITIONS 3.1 loading height (h) : The maximum admissible height of the loaded machines, implements and transporters above the ground. 3.2 overall width (6) : The maximum admissible width of the loaded machines, implements and transporters. 3.3 gateway height (H) : The
13、minimum height, for example of gateways, or the minimum height of outlets of silos above the ground. 3.4 gateway width (B) : The minimum width, for example of gateways. 4 DIMENSIONS The dimensions are shown in the figure. A difference is made between two groups according to the machines, implements
14、and transporters to be loaded and the loading equipment used. 4.1 Loading of agricultural machinery and implements by tractors with front loaders - loading height : h = 3 000 mm - overall width : b = 3 000 mm - gateway height : H=4200mm - gateway width : B=3500mm 4.2 Loading of transporters by other
15、 loading equipment - loading height : h = 3 800 mm - overall width : b = 2 500 mm - gateway height : H = 4 200 mm - gateway width : B = 3 500 mm I Base area FIGURE - Dimensions for mechanical loading Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 09:36:15 MDTNo reproduction or networking permitted without license from IHS -,-,-