《ISO-5661-1983.pdf》由会员分享，可在线阅读，更多相关《ISO-5661-1983.pdf（4页珍藏版）》请在三一文库上搜索。
1、iz - p International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEWlYHAPOHAR OPrAHHSALlHR n0 CTAHlqAPTH3AWWORGANlSATlON INTERNATIONALE DE NORMALISATION Petroleum products - Hydrocarbon liquids - Determination of refractive index Produits pt!troliers - Hydrocarbures fiquides - 04 termina
2、tion de lindice de rt!frac tion First edition - 1983-10-15 UDC 665.7: 535.324 Ref. No. IS0 5661-1983 (E) Descriptors : petroleum products, hydrocarbons, liquid fuels, tests, determination, refractive index, optical tests, reference materials. Price based on 2 pages Copyright International Organizati
3、on for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 20:14:46 MDTNo reproduction or networking permitted without license from IHS -,-,- Foreword IS0 (the International Organization for Standardization) is a worldwide
4、federation of national standards bodies (IS0 member bodies). The work of developing International Standards is carried out through IS0 technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee
5、. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council.
6、 International Standard IS0 5661 was developed by Technical Committee ISO/TC 28, Petroleum products and lubricants, and was circulated to the member bodies in December 1981. It has been approved by the member bodies of the following countries: Austria Belgium Brazil Canada Czechoslovakia Egypt, Arab
7、 Rep. of France . Germany, F. R. Hungary The member bodies of on technical grounds : the following cou ntries expressed disapproval of the document India Iraq Israel Japan Korea, Rep of Netherlands Peru Poland Romania Australia 0 International Organization for Standardization, 1983 South Africa, Rep
8、. of Spain Sri Lanka Sweden Switzerland Turkey United Kingdom USA USSR Printed in Switzerland Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 20:14:46 MDTNo reproduction or netwo
9、rking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IS0 56614983 (E) Petroleum products - Hydrocarbon liquids - Determination of refractive index 1 Scope and field of application 1.1 This International Standard specifies a method for the determination of the refractive index of tra
10、nsparent and light- coloured hydrocarbon liquids such as are used in capacitors, transformers, circuit breakers and in cables of the oil-filled type. 1.2 This method is applicable to liquids having refractive in- dices in the range 133 to 1,7 and at temperatures of 20 to 30 OC. It is not applicable,
11、 within the accuracy stated to liquids having colours darker than 4 colour to IS0 2049, or to liquids having bubble points so close to the test temperature that a reading cannot be obtained before substantial deterioration takes place. NOTES 1. Liquid certified reference materials are available for
12、the range I,33 to 150, but not above this range. The accuracy of the method is not readily checked in the range I,5 to 1,7. 2 Although measurements may be made at temperatures up to 70 OC, the accuracy of the method under these conditions has not been evaluated. 1.3 The refractive index of a liquid
13、varies with its composition and with the nature and amount of contaminants held in solu- tion. If the refractive index of an unused liquid is known, deter- minations made on the same liquid after periods of service may form a basis for estimating any change in composition or the degree of contaminat
14、ion resulting from dissolution of extra- neous material. The refractive index may also be used, in con- junction with other physical properties, to assess the hydrocar- bon types present in petroleum fractions. 2 Reference IS0 2049, Petroleum products - Determination of co/our. 3 Definition For the
15、purpose of this International Standard, the following definition applies. 3.1 refractive index: The ratio of the velocity of light (of specified wavelength) in air at a given temperature and pressure to its velocity in the substance under test. NOTES 1 Refractive index may also be defined as the sin
16、e of the angle of in- cidence divided by the sine of the angle of refraction, as light passes from air into the substance. This is the relative index of refraction. If the absolute refractive index (i.e., referred to a vacuum) is desired, this value should be multiplied by the factor 1,000 27, the a
17、bsolute refrac- tive index of air. 2 The numerical value of the refractive index of liquids is an inverse function of both the wavelength of the light and temperature. For mineral oils, a test temperature of 20 OC and a wavelength of 589,3 nm, equivalent to the mean wavelength of the doublet in the
18、sodium spectrum, are commonly used. 4 Materials 4.1 Solvent Any suitable clean volatile solvent may be used. Acetone or aliphatic hydrocarbon solvents boiling below 80 OC have been found to be satisfactory. 5 Apparatus 5.1 Refractometer, critical angle type, having a refractive index range of approx
19、imately 133 to 1,7 and a manufacturers stated accuracy of 0,000 2. The refractive index scale should be subdivided into units of not greater than 0,001 and permit estimation to 0,000 2. Instruments with or without achromatiz- ing compensating prisms are suitable. 5.2 Glass certified reference materi
20、al, accurate to 0,000 1 with the value of the refractive index engraved upon its upper face. 5.3 White light source, for use with instruments equipped with compensating prisms; a 40 W light bulb has been found satisfactory. 5.4 Sod ium arc lamp, for use with non-compensated in- struments requiring a
21、 monochromatic light source. 5.5 Thermostatted bath and circulating pump, capable of supplying water to the jacketed prisms of the refractometer and of maintaining the temperature constant to within + 0,l OC of the desired test temperature. Copyright International Organization for Standardization Pr
22、ovided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 20:14:46 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 56614983 (El 6 Procedure 6.7 Turn the fine adjustment screw and align the field divi- sion with the in
23、tersection of the cross-hairs in the telescope. 61 . Periodically check the adjustment of the refractometer using the solid reference standard supplied with the instru- ment. If the reading obtained differs by more than 0,000 2 from the value of the standard, adjust the instrument according to the i
24、nstructions provided by the manufacturer. 6.8 Read the refractive index from the graduated scale through the microscope provided, estimating the fourth decimal place. 6.2 Adjust the bath thermostat to the desired temperature, reading this temperature on the refractometer thermometer on the discharge
25、 side. Maintain the flow of water so that the desired temperature is reached and maintained within + 0,l OC. 6.9 Repeat the measurement, using different test portions, until three readings have been obtained that do not vary by more than 0,000 2. Record the refractive index as the average of these r
26、eadings, rounded to four decimal places. solvent and cotton wool of surgical quality and wipe the sur- faces immediately with dry cotton wool. Allow 2 min for temperature equalization before applying the test portion to the prism. 7.1 The refractive index determination is accurate to 0,000 3 over th
27、e range for which calibration standards are available, i.e., 133 to 1,5. 6.4 Apply a test portion to the surface of the refracting prism using a glass rod with a rounded end, or to the capillary open- ing, using a dropping pipette, so that the space between the prisms is completely fitted. Allow 2 m
28、in for temperature equalization. 8 Test report The test report shall contain at least the following information: 6.5 Adjust the light source to allow the incident radiation to strike the illuminating prism. Move the telescope of the instru- ment until the field division is visible. If the instrument
29、 is not fitted with compensating prisms, further position the light source so that the field division boundary is sharp and max- imum contrast between the light and dark portions of the field is obtained. a) the type and identification of the product tested; b) the reference to this International St
30、andard or to a national standard ; c) the result of the test (see 6.9) and the temperature at which the measurement was made. For example, “nb = l.“; 6.6 If the instrument is fitted with compensating prisms, ad- just the compensating prisms until the field consists of a light and dark portion and th
31、e colour fringes at the field division boundary are eliminated. d) any deviation, by agreement or otherwise, from the procedure specified ; and e) the date of the test. Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 20:14:46 MDTNo reproduction or networking permitted without license from IHS -,-,-