《ISO-8116-5-1995.pdf》由会员分享，可在线阅读，更多相关《ISO-8116-5-1995.pdf（12页珍藏版）》请在三一文库上搜索。
1、INTERNATIONAL STANDARD ISO 8116-5 Second edition 1995-09-15 Textile machinery and accessories - Beams for winding - Part 5: Sectional beams for Warp knitting machines Mathe/ pour I industrie textile - Ensouples pour enroulement - Partie 5: Ensouples sectionnelles pour m b) nature of material to be w
2、ound; c) fabrication process of flanges (casting or forging); d) surface quality and, if possible, treatment (paint, chromium-plating or nickelling etc.) of the beam in contact with the material to be wound (inner sides of the flanges and the outside barrel diameter); e) number of grooves (one or tw
3、o) to be included in the boss of each flange. 8 Designation The designation of a sectional beam in accordance with this part of ISO 8116 shall include the following infor- mation in the Order given: d “Sectional beam”; b) reference to this part of ISO 8116, i.e. ISO 8116-5; d the flange diameter, d,
4、 in millimetres; d) the Overall length, Z2, in millimetres; EXAMPLE A sectional beam with flange diameter d, of 535 mm and Overall length Z2 of 1 065 mm shall be designated as follows: Sectional beam ISO 8116-5 - 535 x 1065 Copyright International Organization for Standardization Provided by IHS und
5、er license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:58:38 MDTNo reproduction or networking permitted without license from IHS -,-,- This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license w
6、ith ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:58:38 MDTNo reproduction or networking permitted without license from IHS -,-,- This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license with ISO Lice
7、nsee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:58:38 MDTNo reproduction or networking permitted without license from IHS -,-,- This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Te
8、chnical Standards 1/9972545001 Not for Resale, 04/23/2007 20:58:38 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO 8116=5:1995(E) ICS 59.120.20 Descriptors: textile machinery, winding, Warp-knitting machines, beams (textile machinery), basic concepts, dimensions, run-ou
9、t tolerantes, designation. Price based on 4 pages Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:58:38 MDTNo reproduction or networking permitted without license from IHS -,-,-