《JIS-A-8504-1994-ENG.pdf》由会员分享，可在线阅读，更多相关《JIS-A-8504-1994-ENG.pdf（12页珍藏版）》请在三一文库上搜索。
1、 STD-JIS A 8504-ENGL 1774 W 4733b08 0537030 220 W UDC 624.131.365 (083.75) JAPANESE I NDUSTRIAL STANDARD Standard Form of Specifications of Earth Augers 31s A 8504-1978 - (Reaffirmed : 19 8 3) Phis copy is an English version of Japanese Industriai Standard prepared by Japanese Association, the copyr
2、ight holder. Any reproduction without permission is . Translated Japanese Standards Association 1-24, Akasaka 4, Minato-ku Tokyo 107 Japan 0 JSA, 1986 Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 0
3、3/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- STDOJIS A 8509-ENGL 1794 4733b08 0537033 Lb7 This English translation is prepared at the expense of Japan External Trade Organization (JETRO) . Copyright Japanese Standards Association Provided by IHS under
4、license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- - - STD-JIS A 8504-ENGL 1994 Li933b08 0539032 UT3 UDC 624.131.365 (083.75) JAPANESE IhQUSTRIAL STANDARD J I S Standard Fo
5、rm of Specifications A 8504-1978 of Earth Augers (Reaffirmed: 1983) 1. Scope This Japanese Industrial Standard specifies standard form and main points for preparing specifications of earth augers. Remark: The units and numerical values given in in this standard are in accordance with the Internation
6、al System of Units (SI), and are appended for reference. 2. Division This standard is divided into the standard form and main points for preparing the specifications. 3. Standard Form of Specifications 3.1 The specifications shall follow the standard form of Attached Tab le. 3.2 The specifications s
7、hall indicate outline of the various items and performances of earth augers, and the items may be selected to meet the purpose when a specification is prepared. Further, the construction, materials, test method and the like of each part may be added as occasion demands. 3.3 demands. Such drawings as
8、 general drawing may be appended as occasion 4 , Main Points for Preparing Specifications 4.1 Name The following matters shall be written in the given order. - Abbreviation of manufacturers name, popular name and name. 4.2 Manufacturers Name 4.3 Types 4.3.1 Excavating System The classification of ve
9、rtical type or horizontal type shall be written. 4.3.2 Travelling System The classification of crawler type or tyre type and also the classification of mobile type or trailer type shall be written. 4.3.3 Type of Tower The classification of direct support type, monolithic truss type or erected pillar
10、 type shall be written. - 1 - Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- STD= JIS 4.3.4 Type of Auger
11、 Screw The classification of screw types such as continuous screw type shall be written. 4.4 Dimensions 4.4.1 Overall Height The height from the rail surface or surface of earth up to the highest end of the body with the tower raised vertically shall be written. 4.4.2 Overall Width The maximum width
12、 of body shall be written. For the machine equipped with outrigger, the maximum width when the outrigger is in service shall also be written. I 4.4.3 Overall Length The maximum length of body shall be written. Provided that, the auger screw and auger head are excluded. 4.4.4 Length of Tower The leng
13、th from lower end to the highest end of tower shall be written. 4.4.5 Swing Radius The maximum swing radius of the swing part shall be written. (i) The Front Part (2) The Back Part 4.4.6 Operating Radius The distance between centre line of rotation and auger screw centre shall be written. 4.4.7 4.4.
14、8 Truck Gauge Centre Distance of Crawler The distance between Distance between Auger Screw Centre and Pointed End of Body right and left crawler centres shall be written. 4.4.9 Width of Crawler Shoe 4.4.10 Centre Distance of Tumbler The standard distance between centres of drive tumbler and idle tum
15、bler shall be written. 4.4.11 Wheel Base The horizontal centre distance between axles shall be written. When the machine is equipped with dual axles, the centre distance of dual axles and the distance from single axle t o the centre of dual axles shall be written, and if the front and rear axles are
16、 both dual axles, the centre distance of each dual axles shall also be written. 4.4.12 Track Tread The centre distance (in the case of dual tyres, its centre) of right and left tyres shall be written. (i) Front Wheel (2) Rear Wheel - 2 - Copyright Japanese Standards Association Provided by IHS under
17、 license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- JAPANESE 4.4.13 Wheel The diameter shall be written for steel wheel and nominal size of tyre for tyre system. 4.5 Mass T
18、he mass under the state that the machine is ready for - operation shall be written. auger head and operator is excluded. Provided that the mass of auger screw, 4.6 Performances 4.6.1 Travel Speed The maximum travel speed shall be written. 4.6.2 Swing Speed The maximum swing speed shall be written, 4
19、.6.3 Swing Angle 4.6.4 Maximum Inclined Angle The maximum inclined angle during operation shall be written. Forward Tilting (2) Backward Tilting (3) Lateral Tilting 4.6.5 Slide Range (i) Before and Behind ( 2 ) Up and Down 4.6.6 Auger Head Diameter The diameter of attachable auger head shall be writ
20、ten. (1) Maximum (2) Minimum 4.6.7 Maximum Excavating Length 4.6.8 Maximum Stroke of Excavation 4.6.9 Maximum Speed of Rotation of Auger Screw 4.6.10 Maximum Pulling Load 4.7 Travel Device 4.7.1 Driving System The classification of chain system or gear system shall be written. 4.7.2 Steering Gear Th
21、e classification by steering system i.e. clutch type, planetary gear type, differential gear type or right and left independently driving type shall be written. For the case of tyre type, the classification of front wheel steering or rear wheel steering shall be written. - 3 - Copyright Japanese Sta
22、ndards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- 4.7.3 Locking Device The classification of hand brake system or rail clamp syste
23、m shall be written. 4.8 Swing Gear 4.8.1 Type of Swing Circle or rolling bearing type shall be written. The classification of swing roller type 4.8.2 Driving System The classification of pinion ring gear system, pinion rack gear system or chain oil pressure cylinder system shall be written. 4.8.3 Lo
24、cking Device The classification of drag system or hand brake system shall be written. 4.9 Frame Supporting Device The classification of screw jack system or hydraulic cylinder system shall be written. 4.10 Tower 4.10.1 Type The classification of monolithic type, insert type, telescopic type or foldi
25、ng type shall be written. 4.10.2 Set Up and Bring Down System The classification of wire system or hydraulic cylinder system shall be written. 4.10.3 Tilting System The classification of wire system, hydraulic cylinder system or screw system shall be written. (1) Forward and Backward Tilting (2) Lat
26、eral Tilting 4.10.4 Slide System The classification of wire system, hydraulic cylinder system or screw system shall be written. (i) Forward and Backward Slide Up and Down Slide 4.11 Excavation Device 4.11.1 Driving System The classification of direct coupled driving system, remote driven system shal
27、l be written. direct coupled driving system, the classification of electric type, hydraulic type or pneumatic type. In the case of 4.11.2 Reduction System The classification of planetary gear type, bevel gear type or worm gear type shall be written. 4.11.3 Pressurizing System The classification of t
28、are type or forced type. - 4 - Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- 4.11.4 Steady Brace Device
29、for Auger Screw The classification of stationary type or movable type shall be written. 4.11.5 Coupling Type of Auger Screw The classification of flange type or socket type shall be written.3- I- 4.11.6 Impregnation Device The existence or non-existence of this device shall be written. 4.12 Pulling
30、Device The classification of wire system, chain system, or hydraulic cylinder system shall be written. 4.13 Control Gear The classification of individual control system or centralized control system shall be written. 4.14 Hydraulic Device Concerning hydraulic pump, hydraulic motor and hydraulic cyli
31、nder, the abbreviation of manufacturers name, type, name, number of devices for each use, shall be written. 4.15 Prime Mover The prime movers shall be written for each kind as shown below. 4.15.1 Electric Motor (i) Abbreviation of manufacturers name, type and name (2) Output (3) Number of poles (4)
32、Voltage (5) Frequency (6) Speed of rotation (7) Starting system (8) Full-load current 4.15.2 Internal Combustion Engine (i) Abbreviation of manufacturers name, popular name and name (2) Continuous rated output-rated speed of rotation 4.15.3 Air Motor (i) (2) Air consumption/maximum output/air pressu
33、re Abbreviation of manufacturers name, popular name and name - 5 - Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from I
34、HS -,-,- 4.16 Accessories The name and number of accessories shall be written. 4.17 Others The other items regarded as necessary shall be written. - 6 - Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale,
35、 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- Attached Table. Specification of Earth Auger NAME I“UFACTURER“S NAME TYPE Excavating system Travelling system Type of tower Type of auger screw DIMENCIOHS Overall height m Overall width mm Overall length m
36、 Length of tower mm The front part m The back part m Operating radius m Swing radius Distance between auger screw centre and pointed end of body mm Truch gauge centre distance of crawler mm Width of crawler shoe mm Centre distance of tumbler mm Wheel base mm Track tread Front wheel mm Rear whee 1 mm
37、 Wheel mm MAS s kg PERFORMANCES Travel speed km/h Swing speed =Pm Swing angle deg . - 7 - Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted
38、 without license from IHS -,-,- Maximim inclined angle deg . Forward t i l t i n g Backward t i l t i n g deg . Lateral t i l t i n g Slide range Before and behind mm Up and down mm Auger head diameter Maximum m Minimum mm Maximum excavating length m Maximum stroke of excavation m Maximum speed of r
39、otation of auger screw rpm . Maximum pulling load . kgfLN1 TRAVEL DEVICE Driving system Steering gear Locking device SWING GEAR Type of swing circle Driving system Locking device FRAME SUPPORTING DEVICE TOWER Type Set up and bring down system Tilting system Forward and backward t i l t i n g Lateral
40、 t i l t i n g - 8 - Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- STD*JIS A 8504-ENGL 1794 = 4733b08 05
41、37040 17T W Slide system Forward and backward slide Up and down slide EXCAVATION DEVICE Driving system Reduction system Pressurizing system Steady brace device for auger screw Coupling type of auger screw Impregnation device PULLING DEVICE CONTROL GEAR HYDRAULIC DEVICE PRIME MOVER Electric motor Abb
42、reviation of manufacturers name, type and name output kW Number of poles P Voltage V Frequency c/sHz) Speed of rotation r Pm Starting system Full-load current A Internal combustion engine Abbreviation of manufacturers name, popular name and name Continuous rated output- rated speed of rotation PS(W1
43、 rpm - 9 - Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,- STD=JIS A 850Li-ENGL L L i Li933b08 05390qL OOb
44、 m Air motor Abbreviation of manufacturers name, popular name and name Air consumption/maximum output/air pressure mf/min/ PSW)/ kgf/cm2Pa) ACCESSORIES OTHERS - 10.- Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 09:07:47 MDTNo reproduction or networking permitted without license from IHS -,-,-