《JIS-T-9215-1986-R2003-ENG.pdf》由会员分享，可在线阅读，更多相关《JIS-T-9215-1986-R2003-ENG.pdf（6页珍藏版）》请在三一文库上搜索。
1、JI JAPANESE I NDUSTRIAL STANDARD Translated and Published by Japanese Standards Association JIS T 921511 (Reaffirmed 2003) Stirrups for Lower Extremity Orthoses ICs 11.040.40 Reference number : JIS T 9215 : 1986 (E) PROTECTED BY COPYRIGHT 4s Copyright Japanese Standards Association Provided by IHS u
2、nder license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 19:10:29 MSTNo reproduction or networking permitted without license from IHS -,-,- T 9215 : 1986 Foreword This translation has been made based on the original Japanese Industrial Standard established
3、 by the Minister of International Trade and Industry, through deliberations at the Japanese Industrial Standards Committee in accordance with the Industrial Standardization Law. Date of Establishment: 1986-08-01 Date of Refirnation: 2003-05-20 Date of Public Notice in Official Gazette: Investigated
4、by: Japanese Industrial Standards Committee Divisional Council on Medical and Safety 2003-05-20 JIS T 9215 : 1986, First English edition published in 2004-08 Translated and published by: Japanese Standards Assoaation 4-1-24, Akasaka, Minato-ku, Tokyo, 107-WO JAPAN In the event of any doubts arising
5、as to the contents, the original JIS is to be the find authority. O JSA 2004 AU r i g h t s reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, induding photocopying and micronlm, without permission in
6、 writing from the publisher. Printed in Japan M&T PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 19:10:29 MSTNo reproduction or networking permitted without license
7、from IHS -,-,- JAPANESE INDUSTRIAL STANDARD Types Stirrup for free-motion foot joint Stirrup for foot joint (with one-directional spring controu Stirrup for foot joint (with two-directional spring controu JIS T 9215 : 1986 Structure Symbol A shape FA FB B shape A shape SA SB B shape A shape DA DB B
8、shape Stirrups for Lower Extremity Orthoses 1 Scope This Japanese Industrial Standard defines stirrups for lower extremity orthoses (hereafter referred to as “stirrups”) used for JIS T 9214 (metallic ankle joints for lower extremity orthoses) except for calliper type. 2 Definitions of terms Definiti
9、ons of main terms used in this Standard are as follows: stirrup (type A) sole are combined together stirrup (type B) stirrup for free-motion foot joint a stirrup used for free-motion foot joint stirrup for foot joint with spring control one-directional spring control) or foot joint (with two-directi
10、onal spring control) a stirrup in which the lower bar of a foot joint and the foot plate for a lower bar of a foot joint used by welding the foot plate for sole a stirrup used for foot joint (with 3 Types and symbols Types and symbols shall be as shown in table 1. 4 Shapes and dimensions 4.1 Diamete
11、r of axial hole The diameter of the axial hole shall be any of 6.0+00.05mm, 7 *0+0.05 o mmor 8.0+005mm. Normative references : JIS B 7507 Vernier, dial and digital callipers JIS T 92 14 Metallic ankle joints for lower extremity orthoses JIS T O 10 1 Glossa?y o f terms in prosthetics and orthotics Re
12、lated standard : PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 19:10:29 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 T 9215 1986 Site
13、 I Len& 4.2 Shapes and dimensions The shapes and dimensions shall be as shown in figure and table 2. SA FE DA Allowance li I, 140,160,180,200,220,240,260 Zk1 i 60 or more t W 5 Appearance The surface of the stirrup shall be smooth and without scar, rust, or dirt. 6 Materials The materials shall have
14、 necessary mechanical properties on use and shall be either corrosion-resistant or treated for preventing rust. For type B strrups, materials with good weldability shall be used. 7 instruments at least equivalent in precision shall be used for measurement. Test methods As for size, callipers specsed
15、 in JIS B 7507 or other measuring O 2.5,3.0,3.5,4.0 -0 1 13, 16, 19,22 i l 8 Inspection 8.1 the size and the results shall be conformable to the provision of 4. agreement between the interested parties. 8.2 the results shall be conformable to the provision of 5. Sampling inspection The sampling insp
16、ection shall be carried out according to 7 on In addition, the sampling method and evaluation criteria shall be decided by the 100% inspection The 100% inspection shall be conducted visually on appearance and PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under licen
17、se with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 19:10:29 MSTNo reproduction or networking permitted without license from IHS -,-,- 3. T 9215 1986 9 Packing The package shall be water-proof and corrosion-proof and the packing shall be conducted in such a man
18、ner that the product will not be damaged during delivery or storage. In addition, an indication of the following matters shall be attached: (1) Reference to this Standard (2) Type or symbol or its abbreviation (3) Dimension ( l ) Note() In type A case, the distance between axes Ei, in type B case, t
19、he whole length Zz (4) Manufacture year month (name of manufacturer of orthosis parts) or their abbreviation (5) Name of manufacturer of orthosis parts or its abbreviation 10 Designation of product The products shall be designated by the title of this Standard, type and dimensions (l). 11 Marking Th
20、e following items shall be marked indelibly on a conspicuous part of the strrups . (1) Manufacture year and month (name of manufacturer of orthosis parts) or their abbreviation (2) Name of manufacturer of orthosis parts or its abbreviation PROTECTED BY COPYRIGHT Copyright Japanese Standards Associat
21、ion Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 19:10:29 MSTNo reproduction or networking permitted without license from IHS -,-,- Errata for JIS (English edition) are printed in Standardization Joumul, published monthly by th
22、e Japanese Standards Association, and also provided to subscribers of JIS (English edition) in MonthZy Information. Emta will be provided upon request, please contact: Standardization Promotion Department, Japanese Standards Association 4-1-24, Akasaka, Minato-ku, Tokyo, 107-8440 JUAN TEL. 03-3583-8002 FAX. 03-3583-0462 PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 19:10:29 MSTNo reproduction or networking permitted without license from IHS -,-,-