《NACE-BOS-VOL-2-2007.pdf》由会员分享，可在线阅读，更多相关《NACE-BOS-VOL-2-2007.pdf（5页珍藏版）》请在三一文库上搜索。
1、April 2007 Item No. 21807-4 NACE International BOOK OF STANDARDS Volume 2 This NACE International Book of Standards includes all NACE International standards that have been produced as of April 1, 2007. Published by NACE International 1440 South Creek Drive Houston, TX 77084-4906 ISBN 1-877914-50-9
2、2007, NACE International Copyright NACE International Provided by IHS under license with NACELicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 05/07/2007 21:43:04 MDTNo reproduction or networking permitted without license from IHS -,-,- April 2007 NACE INTERNATIONAL BOOK OF STANDA
3、RDS Volume 2 NACE International issues three classes of standards: standard practices (SP), test methods (TM), and material requirements (MR). Until June 23, 2006, NACE issued recommended practices, which are now designated standard practices. This change will be effective will all new standards iss
4、ued after that date, and designations of older standards will be changed as they are reaffirmed or revised. The alphanumeric designations for NACE International standards indicate the class of standard, the number of the standard in its class for the year of publication, and the year of publication.
5、 The number immediately following the hyphen reflects the year of the most recent revision or reaffirmation of that particular standard. For example, RP0170-2004 is the designation for the 2004 version of the first recommended practice issued in 1970. RP0472-2005 indicates the 2005 version of the fo
6、urth recommended practice issued in 1972. A reference appearing on the cover page of the published standard will explain that this standard was revised in 2005 and the cover page will continue to detail the full approval history of the document. Standards that were formerly recommended practices wil
7、l carry a notation below the new designation showing the former designation, e.g., (formerly RP0181-94). Existing standards will be modified accordingly as they are revised or reaffirmed. NACE International standards are in one of the three sections: Standard (formerly Recommended) Practices, Test M
8、ethods, or Material Requirements. A description of the general nature of each type of NACE International standard is provided at the end of this table of contents. A listing of all NACE International standard test methods and material requirements follows. EXAMPLES: HOW TO FIND A STANDARD IN THIS BO
9、OK Test Methods If you were looking for TM0297-2002, (1) Go to the TM (Test Methods) section. (2) Scan the headings of the pages and look for TMXX97-XXthese are standards that were originally published in 1997. All of the 1997 TMs are next to each other. (3) When you locate the TMs published in 1997
10、, look for TM0297-2002, which will be between TM0197 and TM0397. Material Requirements If you were looking for MR0176-2006, (1) Go to the MR (Material Requirements) section. (2) Scan the headings of the pages and look for MRXX76-XXthese are standards that were originally published in 1976 (there is
11、only one). All of the 1976 MRs would be next to each other. (Sometimes there may be only one MR published in a given year.) (3) When you locate the MRs published in 1976, look for MR0176-2006, which will be between MR0175/ISO15156-3 and MR0103. A SUBJECT INDEX is located in the back of this Book of
12、Standards. Copyright NACE International Provided by IHS under license with NACELicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 05/07/2007 21:43:04 MDTNo reproduction or networking permitted without license from IHS -,-,- April 2007 TABLE OF CONTENTS TEST METHODS TM0169-2000 Labo
13、ratory Corrosion Testing of MetalsItem No. 21200 TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product PipelinesItem No. 21204 TM0173-2005 Methods for Determining Quality of Subsurface Injection Water Using Membrane FiltersItem No. 21205 TM0174-2002 Laboratory Methods for the
14、Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion ServiceItem No. 21206 TM0374-2007 Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Pr
15、oduction Systems)Item No. 21208 TM0177-2005 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S EnvironmentsItem No. 21212 TM0183-2006 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environm
16、entItem No. 21213 TM0284-2003 Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking Item No. 21215 TM0384-2002 Holiday Detection of Internal Tubular Coatings of Less Than 250 m (10 mils) Dry Film Thickness Item No. 21216 TM0185-2006 Evaluation of Internal Plas
17、tic Coatings for Corrosion Control of Tubular Goods by Autoclave TestingItem No. 21217 TM0186-2002 Holiday Detection of Internal Tubular Coatings of 250 to 760 m (10 to 30 mils) Dry-Film ThicknessItem No. 21218 TM0286-2001 Cooling Water Test Unit Incorporating Heat Transfer SurfacesItem No. 21219 TM
18、0187-2003 Evaluating Elastomeric Materials in Sour Gas EnvironmentsItem No. 21220 TM0190-2006 Impressed Current for Laboratory Testing of Aluminum Alloy AnodesItem No. 21221 TM0192-2003 Evaluating Elastomeric Materials in Carbon Dioxide Decompression EnvironmentsItem No. 21222 TM0193-2000 Laboratory
19、 Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93C (200F)Item No. 21223 TM0194-2004 Field Monitoring of Bacterial Growth in Oil and Gas SystemsItem No. 21224 TM0294-2001 Testing of Embeddable Impressed Current Anodes for Use in Cathodic Protection of Atmosph
20、erically Exposed Steel-Reinforced ConcreteItem No. 21225 TM0296-2002 Evaluating Elastomeric Materials in Sour Liquid EnvironmentsItem No. 21227 TM0197-2002 Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate f
21、rom Solution (for Oil and Gas Production Systems)Item No. 21228 TM0297-2002 Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric MaterialsItem No. 21229 Copyright NACE International Provided by IHS under license with NACELicensee=IHS Employees/1111111001, User=Wing,
22、 Bernie Not for Resale, 05/07/2007 21:43:04 MDTNo reproduction or networking permitted without license from IHS -,-,- April 2007 TM0397-2002 Screening Tests for Evaluating the Effectiveness of Gypsum Scale RemoversItem No. 21230 TM0497-2002 Measurement Techniques Related to Criteria for Cathodic Pro
23、tection on Underground or Submerged Metallic Piping SystemsItem No. 21231 TM0198-2004 Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield ServiceItem No. 21232 TM0298-2003 Evaluating the Compatibility of FRP Pipe and Tubulars wi
24、th Oilfield EnvironmentsItem No. 21233 TM0398-98 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Above 100C (212F)Item No. 21234 TM0498-2006 Evaluation of the Carburization of Alloy Tubes Used for Ethylene ManufactureItem No. 21235 TM0199-2006 Standard Te
25、st Method for Measuring Deposit Mass Loading (“Deposit Weight Density”) Values for Boiler Tubes by the Glass-Bead-Blasting TechniqueItem No. 21236 TM0299-99 Corrosion Control and Monitoring in Seawater Injection SystemsItem No. 21237 TM0399-2005 Standard Test Method for Phosphonate in BrineItem No.
26、21238 TM0499-99 Immersion Corrosion Testing of Ceramic MaterialsItem No. 21239 TM0101-2001 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank SystemsItem No. 21240 TM0102-2002 Measurement of Protective Coating Electrical Conductance on Underg
27、round PipelinesItem No. 21241 TM0103-2003 Laboratory Test Procedures for Evaluation of SOHIC Resistance of Plate Steels Used in Wet H2S ServiceItem No. 21242 TM0104-2004 Offshore Platform Ballast Water Tank Coating System EvaluationItem No. 21243 TM0204-2004 Exterior Protective Coatings for Seawater
28、 Immersion ServiceItem No. 21244 TM0304-2004 Offshore Platform Atmospheric and Splash Zone Maintenance Coating System EvaluationItem No. 21245 TM0404-2004 Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation Item No. 21246 TM0105-2005 Test Procedures for Organic-B
29、ased Conductive Coating Anodes for Use on Concrete Structures Item No. 21247 TM0106-2006 Detection, Testing, and Evaluation of Microbiologically Influenced Corrosion (MIC) on External Surfaces of Buried PipelinesItem No. 21248 MATERIAL REQUIREMENTS MR0174-2001 Recommendations for Selecting Inhibitor
30、s for Use as Sucker-Rod Thread LubricantsItem No. 21300 NACE MR0175/ Materials for use in H2S containing environments in oil and gas productionPart 1: General ISO 15156-1 principles for selection of cracking-resistant materials*Item No. 21307 NACE MR0175/ Materials for use in H2S containing environm
31、ents in oil and gas productionPart 2: ISO 15156-2 Cracking-resistant carbon and low alloy steels, and the use of cast irons*Item No. 21307 NACE MR0175/ Materials for use in H2S containing environments in oil and gas productionPart 3: Cracking- Copyright NACE International Provided by IHS under licen
32、se with NACELicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 05/07/2007 21:43:04 MDTNo reproduction or networking permitted without license from IHS -,-,- April 2007 ISO 15156-3 resistant CRAs (corrosion-resistant alloys) and other alloys*Item No. 21307 NACE MR0175/ Technical Cor
33、rigendum 1Item No. 21307 ISO 15156-1 NACE MR0175/ Technical Corrigendum 1Item No. 21307 ISO 15156-2 NACE MR0175/ Technical Corrigendum 1Item No. 21307 ISO 15156-3 NACE MR0175/ Technical Corrigendum 2Item No. 21307 ISO 15156-3 MR0176-2006 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield
34、 EnvironmentsItem No. 21303 MR0103-2005 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining EnvironmentsItem No. 21305 *Nationally adopted international standard based on MR0175. GENERAL DESCRIPTION OF NACE STANDARDS Standard (formerly Recommended) practices include recomm
35、ended methods of selection, design, installation, maintenance, or operation of material or system where corrosion is a factor. In addition, some standard practices focus on details of construction of a corrosion control system; methods of treating the surface of materials to reduce corrosion; requir
36、ements for using devices to reduce corrosion; and procedures for increasing the effectiveness, safety, and economic benefits of an installation or system. Test methods are tests related to corrosion prevention and control. This type of standard can give the method of conducting tests to ascertain th
37、e characteristics of a material, design, or operation. Material requirements state the necessary characteristics of a material where corrosion is a factor in the selection, application, and maintenance of the material. Copyright NACE International Provided by IHS under license with NACELicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 05/07/2007 21:43:04 MDTNo reproduction or networking permitted without license from IHS -,-,-