《NEMA-NTCIP-1209-2005.pdf》由会员分享，可在线阅读，更多相关《NEMA-NTCIP-1209-2005.pdf（60页珍藏版）》请在三一文库上搜索。
1、 NTCIP 1209:2005 NTCIP 1209:2005 National Transportation Communications for ITS Protocol Data Element Definitions for Transportation Sensor Systems Joint Standard of AASHTO, ITE, and NEMA version 01.19 Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMALic
2、ensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/19/2007 08:24:15 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMALicensee=NASA Technical Standards 1/9972545001 Not
3、for Resale, 04/19/2007 08:24:15 MDTNo reproduction or networking permitted without license from IHS -,-,- A Joint Standard of AASHTO, ITE, and NEMA NTCIP 1209:2005NTCIP 1209:2005 v01.19 National Transportation Communications for ITS Protocol Data Element Definitions for Transportation Sensor Systems
4、 November 2005 Published by American Association of State Highway and Transportation Officials (AASHTO) 444 North Capitol St., N.W., Suite 249 Washington, DC, 20001 Institute of Transportation Engineers (ITE) 1099 14th Street, N.W., Suite 300 West Washington, D.C. 20005-3438 National Electrical Manu
5、facturers Association (NEMA) 1300 North 17th Street, Suite 1752 Rosslyn, Virginia 22209-3806 2005 AASHTO / ITE / NEMA. All rights reserved. Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMALicensee=NASA Technical Standards 1/9972545001 Not for Resale, 04
6、/19/2007 08:24:15 MDTNo reproduction or networking permitted without license from IHS -,-,- Do Not Copy Without Written Permission 2005 AASHTO / ITE / NEMA NOTICES Copyright Notice 2005 by the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportatio
7、n Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). All intellectual property rights, including, but not limited to, the rights of reproduction, translation, and display are reserved under the laws of the United States of America, the Universal Copyright Convention, the
8、Berne Convention, and the International and Pan American Copyright Conventions. Except as licensed or permitted, you may not copy these materials without prior written permission from AASHTO, ITE, or NEMA. Use of these materials does not give you any rights of ownership or claim of copyright in or t
9、o these materials. Visit www.ntcip.org for other copyright information, for instructions to request reprints of excerpts, and to request reproduction that is not granted below. PDF File License Agreement To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of an Adob
10、e Portable Document Format (PDF) electronic data file (the “PDF File”), AASHTO / ITE / NEMA authorizes each registered PDF File user to view, download, copy, or print the PDF File available from the authorized Web site, subject to the terms and conditions of this license agreement: (a) you may downl
11、oad one copy of each PDF File for personal, noncommercial, and intraorganizational use only; (b) ownership of the PDF File is not transferred to you; you are licensed to use the PDF File; (c) you may make one more electronic copy of the PDF File, such as to a second hard drive or burn to a CD; (d) y
12、ou agree not to copy, distribute, or transfer the PDF File from that media to any other electronic media or device; (e) you may print one paper copy of the PDF File; (f) you may make one paper reproduction of the printed copy; (g) any permitted copies of the PDF File must retain the copyright notice
13、, and any other proprietary notices contained in the file; (h) the PDF File license does not include (1) resale of the PDF File or copies, (2) republishing the content in compendiums or anthologies, (3) publishing excerpts in commercial publications or works for hire, (4) editing or modification of
14、the PDF File except those portions as permitted, (5) posting on network servers or distribution by electronic mail or from electronic storage devices, and (6) translation to other languages or conversion to other electronic formats; (i) other use of the PDF File and printed copy requires express, pr
15、ior written consent. Data Dictionary and MIB Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Data Dictionary (“DD”) or Management Information Base (“MIB”), AASHTO / ITE / NEMA extend the following permission: You may make and/or dist
16、ribute unlimited copies, including derivative works, of the DD or MIB, including copies for commercial distribution, provided that: (i) each copy you make and/or distribute contains the citation “Derived from NTCIP 0000 insert the document number. Used by permission of AASHTO / ITE / NEMA.”; (ii) th
17、e copies or derivative works are not made part of the standards publications or works offered by Copyright National Electrical Manufacturers Association Provided by IHS under license with NEMALicensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/19/2007 08:24:15 MDTNo reproduction or net
18、working permitted without license from IHS -,-,- 2005 AASHTO / ITE / NEMA Do Not Copy Without Written Permission other standards developing organizations or publishers or as works-for-hire not associated with commercial hardware or software products intended for field implementation; (iii) use of th
19、e DD or MIB is restricted in that the syntax fields may be modified only to reflect a more restrictive subrange or enumerated values; (iv) the description field may be modified but only to the extent that: (a) only those bit values or enumerated values that are supported are listed; and (b) the more
20、 restrictive subrange is expressed. These materials are delivered “AS IS” without any warranties as to their use or performance. AASHTO / ITE / NEMA and their suppliers do not warrant the performance or results you may obtain by using these materials. AASHTO / ITE / NEMA and their suppliers make no
21、warranties, express or implied, as to noninfringement of third party rights, merchantability, or fitness for any particular purpose. In no event will AASHTO / ITE / NEMA or their suppliers be liable to you or any third party for any claim or for any consequential, incidental or special damages, incl
22、uding any lost profits or lost savings, arising from your reproduction or use of these materials, even if an AASHTO / ITE / NEMA representative has been advised of the possibility of such damages. Some states or jurisdictions do not allow the exclusion or limitation of incidental, consequential or s
23、pecial damages, or the exclusion of implied warranties, so the above limitations may not apply to you. Use of these materials does not constitute an endorsement or affiliation by or between AASHTO, ITE, or NEMA and you, your company, or your products and services. If you are unwilling to accept the
24、foregoing restrictions, you should immediately return these materials. PRL and RTM Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Profile Requirements List (“PRL”) or a Requirements Traceability Matrix (“RTM”), AASHTO / ITE / NEMA e
25、xtend the following permission: (i) you may make and/or distribute unlimited copies, including derivative works of the PRL (then known as a Profile Implementation Conformance Statement (“PICS”) or the RTM, provided that each copy you make and/or distribute contains the citation “Based on NTCIP 0000
26、insert the document number PRL or RTM. Used by permission. Original text (C) AASHTO / ITE / NEMA.”; (ii) you may not modify the PRL or the RTM except for the Project Requirements column, which is the only column that may be modified to show a products implementation or the project-specific requireme
27、nts; and (iii) if the PRL or RTM excerpt is made from an unapproved draft, add to the citation “PRL (or RTM) excerpted from a draft document containing preliminary information that is subject to change.” The permission is limited to not include reuse in works offered by other standards developing or
28、ganizations or publishers, and to not include reuse in works-for-hire or compendiums or electronic storage that are not associated with commercial hardware or software products intended for field installation. A PICS is a Profile Requirements List which is completed to indicate the features that are
29、 supported in an implementation. Visit www.ntcip.org for information on electronic copies of the MIBs, PRLs, and RTMs. Content and Liability Disclaimer The information in this publication was considered technically sound by the consensus of persons Copyright National Electrical Manufacturers Associa
30、tion Provided by IHS under license with NEMALicensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/19/2007 08:24:15 MDTNo reproduction or networking permitted without license from IHS -,-,- Do Not Copy Without Written Permission 2005 AASHTO / ITE / NEMA engaged in the development and appr
31、oval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. AASHTO, ITE, and NEMA standards and guideline publications, of which the document contained herein is one, ar
32、e developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While AASHTO, ITE, and NEMA administer the process and establish rules to promote fair
33、ness in the development of consensus, they do not write the document and they do not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim liabi
34、lity for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guaranty
35、or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performanc
36、e of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, AASHTO, ITE, and NEMA are not undertaking to render professional or other services for or on behalf of any person or entity, nor are AASHTO, ITE, an
37、d NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances
38、. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce comp
39、liance with the contents of this document. AASHTO, ITE, and NEMA do not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributa
40、ble to AASHTO, ITE, or NEMA and is solely the responsibility of the certifier or maker of the statement. Trademark Notice NTCIP is a trademark of AASHTO / ITE / NEMA. All other marks mentioned in this document are the trademarks of their respective owners. Copyright National Electrical Manufacturers
41、 Association Provided by IHS under license with NEMALicensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/19/2007 08:24:15 MDTNo reproduction or networking permitted without license from IHS -,-,- NTCIP 1209:2005 v01.19 Page i 2005 AASHTO / ITE / NEMA Do Not Copy Without Written Permissi
42、on ACKNOWLEDGEMENTS This publication was prepared by the NTCIP TSS Working Group, which is a subdivision of the NTCIP Joint Committee. The Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Transportation Officials (AASHTO), the Insti
43、tute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). The Joint Committee on the NTCIP consists of six representatives from each of the standards organizations, and provides guidance for NTCIP development. At the time that this document was prepared, t
44、he following individuals were members of the NTCIP TSS Working Group: G. Curtis Herrick (Chair) Earl Hoekman Allen Jacobs Dan Manor Andrew Mao Greg McKhann Bruce Morehead Stuart Reynolds Robert De Roche Sean Skehan Keith Vennel Jo Versavel John Vetterling Floyd Workmon Other individuals providing in
45、put to the document, include: Mike Juha Wim Maes Alastair Wiggens In addition to the many volunteer efforts, recognition is also given to those organizations that supported the efforts of the NTCIP TSS Working Group by providing comments and resources for the development of the standard, including:
46、3M Intelligent Transportation Systems California Department of Transportation Denver Regional Council of Governments Electronic Integrated Systems, Inc. G. C. Herrick October 2004 ITE Software Standard; May 2005 NEMA Standard; February 2005 History From 1996 to 1999, this document was referenced as
47、either NEMA TS 3.TSS or TS 3.SEN. However, to provide an organized numbering scheme for the NTCIP documents, this document is now referenced as NTCIP 1209. The technical specifications of NTCIP 1209 are identical to the former reference, except as noted in the development history below: NTCIP 1209 v
48、01.09. July 1999 Accepted as a User Comment Draft by the Joint Committee on the NTCIP. January 2000 NTCIP Standards Bulletin B0042 distributed for user comment. NTCIP 1209 v01.11. September 2001 Accepted as a Second Round User Comment Draft by the Joint Committee on the NTCIP. February 2002 NTCIP Standards Bulletin B0070 distributed v01.13 for user comment. NTCIP 1209 v01.18. February 2003 Accepted v01.18 as a Recommended Standard by the Joint Committee on the NTCIP. April 2004 NTCIP Standards Bulletin B0093 referred v01.18d for balloting. Oct