《SAE-AS-9502A-2003-R2007.pdf》由会员分享，可在线阅读，更多相关《SAE-AS-9502A-2003-R2007.pdf（3页珍藏版）》请在三一文库上搜索。
1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. SHEET 1 OF 3 AS9502 REV. A THIRD ANGLE PROJECTION AEROSPACE STANDARD AS9502 REV. A IS
3、SUED 1998-08 REVISED 2003-04 REAFFIRMED 2007-06 (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A PREPARED BY SAE COMMITTEE E-25, GENERAL STANDARDS FOR AEROSPACE & PROPULSION SYSTEMS FEDERAL SUPPLY CLASS 5306 RATIONALE THIS DOCUMENT HAS BE
4、EN REAFFIRMED TO COMPLY WITH THE SAE 5-YEAR REVIEW POLICY. Copyright 2007 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, wit
5、hout the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org Copyright SAE International Provided by IHS under license with SAELicensee
6、=Defense Supply Ctr/5913977001 Not for Resale, 12/04/2007 19:34:29 MSTNo reproduction or networking permitted without license from IHS -,-,- BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A AEROSPACE STANDARD AS9502 SHEET 2 OF 3 AS9502 REV. A
7、 REV. A (R) Copyright SAE International Provided by IHS under license with SAELicensee=Defense Supply Ctr/5913977001 Not for Resale, 12/04/2007 19:34:29 MSTNo reproduction or networking permitted without license from IHS -,-,- BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S662
8、86, 130 KSI MIN, .3125-24 UNJF-3A AEROSPACE STANDARD AS9502 SHEET 3 OF 3 AS9502 REV. A REV. A (R) Copyright SAE International Provided by IHS under license with SAELicensee=Defense Supply Ctr/5913977001 Not for Resale, 12/04/2007 19:34:29 MSTNo reproduction or networking permitted without license from IHS -,-,-