《UL-10B-1997.pdf》由会员分享，可在线阅读，更多相关《UL-10B-1997.pdf（26页珍藏版）》请在三一文库上搜索。
1、UL 10B ISBN 0-7629-0170-5 Fire Tests of Door Assemblies Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULLicensee=Defense Contract Mgmt Command/5935922100 Not for Resale, 08/27/2006 03:56:08 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyri
2、ght Underwriters Laboratories Inc. Provided by IHS under license with ULLicensee=Defense Contract Mgmt Command/5935922100 Not for Resale, 08/27/2006 03:56:08 MDTNo reproduction or networking permitted without license from IHS -,-,- Underwriters Laboratories Inc. (UL) 333 Pfi ngsten Road Northbrook,
3、IL 60062-2096 UL Standard for Safety for Fire Tests of Door Assemblies, UL 10B Ninth Edition, Dated April 28, 1997 Revisions: This Standard contains revisions through and including October 5, 2001. UL Standards for Safety are developed and maintained in the Standard Generalized Markup Language (SGML
4、). SGML - an international standard (ISO 8879-1986) - is a descriptive markup language that describes a documents structure and purpose, rather than its physical appearance on a page. Due to formatting differences resulting from the use of ULs new electronic publishing system, please note that addit
5、ional pages (on which no requirements have been changed) may be included in revision pages due to relocation of existing text and reformatting of the Standard. Text that has been changed in any manner is marked with a vertical line in the margin. Changes in requirements are marked with a vertical li
6、ne in the margin and are followed by an effective date note indicating the date of publication or the date on which the changed requirement becomes effective. The new and/or revised requirements are substantially in accordance with ULs Bulletin(s) on this subject dated September 29, 2000. The bullet
7、in(s) is now obsolete and may be discarded. The revisions dated October 5, 2001 include a reprinted title page (page1) for this Standard. As indicated on the title page (page 1), this UL Standard for Safety is an American National Standard. Attention is directed to the note on the title page of this
8、 Standard outlining the procedures to be followed to retain the approved text of this ANSI/UL Standard. As indicated on the title page (page1), this UL Standard for Safety has been adopted by the Department of Defense. The master for this Standard at ULs Northbrook Office is the official document in
9、sofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions regarding the accuracy of this Standard. ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribu
10、tion diskette for a Standard-on-Diskette and the fi le for the Standard on the distribution diskette should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. All rights reserved. No par
11、t of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is
12、current only if it incorporates the most recently adopted revisions. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or fi tness for any purpose. OCTOBER 5, 2001 UL 10Btr1 Copyright Und
13、erwriters Laboratories Inc. Provided by IHS under license with ULLicensee=Defense Contract Mgmt Command/5935922100 Not for Resale, 08/27/2006 03:56:08 MDTNo reproduction or networking permitted without license from IHS -,-,- In no event will UL be liable for any special, incidental, consequential, i
14、ndirect or similar damages, including loss of profi ts, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability
15、for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. UL will attempt to answer support requests concerning electronic versions of its Standards. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve
16、 every support request. UL supports the electronic versions of its Standards only if they are used under the conditions and operating systems for which it is intended. ULs support policies may change from time-to-time without notifi cation. UL reserves the right to change the format, presentation, f
17、i le types and formats, delivery methods and formats, and the like of both its printed and electronic Standards without prior notice. Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, dama
18、ge, claim, or judgement (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. If a single-user version electronic Standard was purchased, one copy of this Standard may be stored on t
19、he hard disk of a single personal computer, or on a single LAN fi le-server or the permanent storage device of a multiple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access. If a multiple-us
20、er version electronic Standard was purchased, one copy of the Standard may be stored on a single LAN fi le-server, or on the permanent storage device of a multiple-user computer, or on an Intranet server. The number of concurrent users shall not exceed the number of users authorized. Electronic Stan
21、dards are intended for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version of an electronic Standard. Only one copy of the Standard may be printed for each authorized user
22、of a multiple-user version of an electronic Standard. Because of differences in the computer/software/printer setup used by UL and those of electronic Standards purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard. An employee
23、 of an organization purchasing a UL Standard can make a copy of the page or pages being viewed for their own fair and/or practical internal use. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, fi gures, and/or other elements of the Standard having
24、future effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. New product submittals made prior to a speci
25、fi ed future effective date will be judged under all of the requirements in this Standard including those requirements with a specifi ed future effective date, unless the applicant specifi cally requests that the product be judged under the current requirements. However, if the applicant elects this
26、 option, it should be noted that compliance with all the requirements in this Standard will be required as a condition of continued Listing and Follow-Up Services after the effective date, and understanding of this should be signifi ed in writing. Copyright 2001 Underwriters Laboratories Inc. OCTOBE
27、R 5, 2001 UL 10Btr2 Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULLicensee=Defense Contract Mgmt Command/5935922100 Not for Resale, 08/27/2006 03:56:08 MDTNo reproduction or networking permitted without license from IHS -,-,- This Standard consists of pages dated as s
28、hown in the following checklist: PageDate 1-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . October 5, 2001 A1-A2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . April 28, 1997 B1-B2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . October 5, 2001 OCTOBER 5, 2001 UL 10Btr3 Copyright Underwriters Lab
30、oratories Inc. Provided by IHS under license with ULLicensee=Defense Contract Mgmt Command/5935922100 Not for Resale, 08/27/2006 03:56:08 MDTNo reproduction or networking permitted without license from IHS -,-,- OCTOBER 5, 2001 UL 10Btr4 No Text on This Page Copyright Underwriters Laboratories Inc.
31、Provided by IHS under license with ULLicensee=Defense Contract Mgmt Command/5935922100 Not for Resale, 08/27/2006 03:56:08 MDTNo reproduction or networking permitted without license from IHS -,-,- APRIL 28, 1997 (Title Page Reprinted: October 5, 2001) HISTORICAL NOTE Doors for protection of openings
32、 in walls and partitions have been subjected to fi re-exposure tests by Underwriters Laboratories Inc. for a period of more than 65 years. Standard construction of wood-core, tin-clad fi re doors was fi rst formally recognized by the National Fire Protection Association in 1899. Hollow-metal doors w
33、ere fi rst submitted to Underwriters Laboratories for investigation and fi re-exposure test in 1904. Fire-testing of other types of doors and shutters by UL has been conducted over a correspondingly long period. Study by a long-continued NFPA committee, of results of numerous fi re tests of doors co
34、nducted under the auspices of this committee at Underwriters Laboratories in 1900 1901, formed the basis for many details of construction covered by Standards for protection of openings adopted by the National Fire Protection Association and by the National Board of Fire Underwriters in 1915, and pu
35、blished by both. 1 UL 10B Standard for Fire Tests of Door Assemblies First Edition November, 1942 Second Edition July, 1950 Third Edition November, 1957 Fourth Edition January, 1970 Fifth Edition February, 1974 Sixth Edition August, 1979 Seventh Edition May, 1986 Eighth Edition July, 1993 Ninth Edit
36、ion April 28, 1997 The most recent approval of UL 10B as an American National Standard (ANSI) occurred on June 27, 2001 and covers the Eighth Edition including revisions through October 5, 2001. Approval of UL 10B as an American National Standard is maintained using the continuous maintenance proces
37、s. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Written comments are to be sent to UL-SC Standards Department, 1655 Scott Blvd, Santa Clara, CA 95050. An effective date included as a note immediately following certain requirements is one establi
38、shed by Underwriters Laboratories Inc. The Department of Defense (DoD) has adopted UL 10B on September 6, 1989. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. ANSI/UL 10B-2001 Copyright Underwriters Laboratories Inc. Provided by IHS under lic
39、ense with ULLicensee=Defense Contract Mgmt Command/5935922100 Not for Resale, 08/27/2006 03:56:08 MDTNo reproduction or networking permitted without license from IHS -,-,- Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is cur
40、rent only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. ISBN 0-7629-0170-5 COPYRIGHT 1997, 2001 UNDERWRITERS LABORATORIES INC. Copyright Underwriters Laboratories Inc. Provided by I
41、HS under license with ULLicensee=Defense Contract Mgmt Command/5935922100 Not for Resale, 08/27/2006 03:56:08 MDTNo reproduction or networking permitted without license from IHS -,-,- CONTENTS FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 INTRODUCTION 1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2 General . . . . . . . . . . . . . . . . . . . . . . . .
43、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2.1 Units of measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2.2 Undated references . . . . . . . . . . . .
44、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 CONTROL OF FIRE TESTS 3 Time-Temperature Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 4 Furnace Temperatures . . .
45、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 5 Unexposed Surface Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 TEST ASSEMBLIES 6 Construction and
46、 Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 7 Mounting for Test Purposes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 CONDUCT OF TE
47、STS 8 Time of Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 9 Fire Endurance Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48、. . . . . . . .10 10 Hose Stream Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 REPORT 11 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 CONDITIONS OF ACCEPTANCE 12 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .