《TIA-TSB-87-2018-1997-R2002.pdf》由会员分享，可在线阅读，更多相关《TIA-TSB-87-2018-1997-R2002.pdf（13页珍藏版）》请在三一文库上搜索。
1、TIA TELECOMMUNICATIONS SYSTEMS BULLETIN Cellular Digital Packet Data System Specification - Part 201 8 M-ES EID Assignment TSB-87-2018 Reaffirmed August 9,2002 ODECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Teleconmiunications Industry Association represents the conmiunications sector of
2、 Copyright Telecommunications Industry Association Provided by IHS under license with EIALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from IHS -,-,- NOTICE TIA Engineering Standards and Publication
3、s are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. E
4、xistence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those othe
5、r than TIA members, whether the standard is to be used either domestically or internationally. Standards, Publications and Bulletins are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent o
6、wner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA Standards or Documents, in that they contain a compilation of engineering data or information useful to the technical community, and represent a
7、pproaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties wh
8、o wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to review this document every five years, but it maybe revised and updated at a
9、ny time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 3-4017, formulated under the cognizance of the TIA TR-45.6 Subcommittee on Adjunct Wireless Packet Data Technology.) This Document was reaffirmed b
10、y the Telecommunications Industry Association on August 9,2002. Published by OTELECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDA
11、RDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1 -800-854-7 179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search-n-order . c h All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Pro
12、vided by IHS under license with EIALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyright Telecommunications Industry Association Provided by IHS under license with EIALicensee=IHS E
13、mployees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from IHS -,-,- NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees o
14、f the Telecommunications Industry Association (?TIA?). TIA is not the author of the document contents, but publishes and claims copyright to the document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in ac
15、cordance with the TIA Engineering Manual (?Manual?), the current and predecessor versions of which are available at http:/www.tiaonline.orZr/standards/sfZr/engineering manual.ch. TIA?S function is to administer the process, but not the content, of document preparation in accordance with the Manual a
16、nd, when appropriate, the policies and procedures of the American National Standards Institute (?ANSI?). THE USE OR PRACTICE OF CONTENTS OF THIS DOCUMENT MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (?IPR?), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA
17、 MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED TO TIA?S ATTENTION, A STATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIG
18、ATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FORA PARTICULAR PURPOSE PARTY?S INTELLECT
19、UAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENT?S COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD
20、TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGAT
21、ION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTE
22、NTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from
23、 IHS -,-,- STDSEIA TSB87-2018-ENGL 1777 323Lib00 b01538 378 = TIAIEIA TELECOMMUNICATIONS SYSTEMS BULLETIN Cellular Digital Packet Data System Specification - Part 2018 M-ES EID Assignment TSB87-2018 DECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Copyright Telecommunications Industry Associati
24、on Provided by IHS under license with EIALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from IHS -,-,- NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest
25、through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications
26、shall not in any respect preclude any member or nonmember of TINEIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the stand
27、ard is to be used either domestically or internationally. Standards, hblications and Buletins are adopted by EJA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obliga
28、tion whatever to parties adopting the Standard, hblication, or Bulletin. T e c h n i c a l Bulletins are distinguished from TIA/EIA Standards or Interim Standards, in that they contau? a compilation of engineering data or information useful to the technical community, and represent approaches to goo
29、d engineering practices that are suggested by the foxmulating committee. This Bulleth is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring o
30、ther approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from time to time as may be occasioned by changes in technolo
31、gy, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 4017, formulated under the cognizance of the TIA TR-45.6 Adjunct Wireless Packet Data Standards Subcommittee) Published by TJZECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Depar
32、tment 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to the current or call Global Engineering Documents, USA and Canada (1-800-854-7179) Catalog of EU, JEDEC and TIA STANDARDS and ENGINEERING PUBLICATIONS International (303-397-7956) A l l rights reserved printed in U.S.A. Copyright
33、Telecommunications Industry Association Provided by IHS under license with EIALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from IHS -,-,- - TIAIEIUSB-87-2018 PART 2018 Table of Contents O Foreword
34、2018-iii Document Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2018-iii . 0.1 1 Introduction 2018-1 2 Bit Transmission Ordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018-2 3 Manufacturer Iden
35、tifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018-2 4 Unique Word Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018-2 5 Request Form for CDPD Manufacturer ID . . . . . . . . . . . . . . . . . . .
36、. . . . . . . . . . . 2018-3 Copyright Telecommunications Industry Association Provided by IHS under license with EIALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from IHS -,-,- Foreword TIAIEIAfEB-
37、87-2018 PART 2018 M-ES EID Assignment O Foreword This foreword is not part of this Telecommunications Systems Bulletin. This Telecommunications Systems Bulletin has been developed by Subcommittee TR-45.6, and contains information which may be useful to implementors of systems compliant with TSB-87,
38、“Cellular Digital Packet Data System Specification,“ or its derivatives. This document contains significant portions of material originally submitted by the Cellular Digital Packet Data Forum Inc. CDPD is a technology intended to provide packet data networking services to mobile hosts. The media use
39、d to provide these services consists of radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service. o. 1 Document Structure This Telecommunications Systems Bulletin is published as a series of Parts. Each Part contains information pertaining to one aspect of the system. T
40、he functional structure of this TSB is as follows: o Part 1000 to Part 1999-Guidelines for Service Providers These Parts are informative and discuss non-CDPD specific entities (such as Intermediate Systems), support services (such as directory Previous page is blank Copyright Telecommunications Indu
41、stry Association Provided by IHS under license with EIALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from IHS -,-,- TINEIA/TSB-87-2018 M-ES EID Assignment services, accounting summary and settlement
42、 procedures, authentication, etc.), value-added services (such as subscriber location) and Service Provider issues (such as an interoperability test plan overview and parameter configuration). Part 1000 contains the detailed listing of all Parts of this TSB. Part 2000 to Part 2999-Guidelines for Man
43、ufacturers of CDPD equipment These Parts are informative and discuss such concerns as CDPD-specific entities (such as Mobile End Systems (M-ESs), Mobile Data Base Stations (MDBSs) and Mobile Data Intermediate Systems (MD-ISS), external interfaces (such as that between the Subscriber Unit (SU) and th
44、e Subscriber Identity Module (SIM) and multicasts from the perspective of each of the participating entities. Part 3000 to Part 3999-Guidelines for the CDPD Network Information Center (NIC). These Parts are informative and describe the issues and procedures which must be addressed by an agency servi
45、ng as a NIC on behalf of the CDPD community. o o 201 &iv Copyright Telecommunications Industry Association Provided by IHS under license with EIALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/30/2007 03:09:26 MDTNo reproduction or networking permitted without license from IH
46、S -,-,- STDBEIA TSB87-2018-ENGL 1797 323qb00 ObOL5Li3 735 TIAIEIAITSB-87-2018 Introduction PART 2018 M-ES EID Assignment 1 Introduction This Part presents a tutorial on the usage of the Equipment IDentifier (EID) for manufacturers of M-ESs. This Part also provides a template application form to be u
47、sed in acquiring a manufacturer identifier from the Institute of Electrical and Electronic Engineers (IEEE). The IEEE Registration Authority assigned manufacturer identifier comprises the high-order 24 bits of the EID defined in IS-732. In the EID, the manufacturer identifier is followed by a 24-bit
48、 unique CDPD M-ES number assigned by the manufacturer. The EID is used to guarantee that Temporary Equipment Identifier (TEI) requests sent by any two M-ESs are different. It appears in the following messages: O IDENTITY REQUEST Message IS-732-403 O IDENTITY ASSIGN Message IS-732-403 o The EID is further optionally used in the following Mobile Network Registration Protocol (MNRP) Messages: IDENTITY CHECK Response Message IS-732-403. O END SYSTEM HELLO IS-732-507 O END SYSTEM