《UL-1978-2005.pdf》由会员分享,可在线阅读,更多相关《UL-1978-2005.pdf(36页珍藏版)》请在三一文库上搜索。
1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1978 ISBN 0-7629-1052-6 Grease Ducts Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULLicensee=North Carolina State University/5618801100 Not for Resale, 10/20/2
2、006 02:57:00 MDTNo reproduction or networking permitted without license from IHS -,-,- UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULLicensee=North Carolina Stat
3、e University/5618801100 Not for Resale, 10/20/2006 02:57:00 MDTNo reproduction or networking permitted without license from IHS -,-,- UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Underwriters Laboratories Inc. (UL) 333 Pfi ngsten Road Nor
4、thbrook, IL 60062-2096 UL Standard for Safety for Grease Ducts, UL 1978 Third Edition, Dated January 21, 2005 Summary of Topics This new edition of ANSI/UL 1978 is a periodic re-issuance to ensure that ULs Standards remain up to date with regard to format and editorial issues such as numbering, pagi
5、nation, and cross-referencing. This new edition also includes revisions to the Scope, Glossary, Materials, Performance, Test Installations, Maximum Temperature Rise Information, 500 Degree Temperature Test and the Abnormal Temperature Test. The new requirements are substantially in accordance with U
6、Ls Bulletin(s) on this subject dated August 30, 2004 and November 12, 2004. The bulletin(s) is now obsolete and may be discarded. As indicated on the title page (page 1), this UL Standard for Safety is an American National Standard. Attention is directed to the note on the title page of this Standar
7、d outlining the procedures to be followed to retain the approved text of this ANSI/UL Standard. The UL Foreword is no longer located within the UL Standard. For information concerning the use and application of the requirements contained in this Standard, the current version of the UL Foreword is lo
8、cated on ULStandardsInfoNet at: http:/ The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions regarding the accuracy
9、of this Standard. ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the fi le for the Standard on the distribution diskette should be altered in any way. All of ULs Standards and all copyrights, ownershi
10、ps, and rights regarding those Standards shall remain the sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without
11、 prior permission of UL. Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not li
12、mited to, the implied warranties of merchantability or fi tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profi ts, lost savings, loss of data, or any other damages arising out of the use of or the inabil
13、ity to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. JANUARY 21, 2005 UL 1978tr1 Copyright Underwri
14、ters Laboratories Inc. Provided by IHS under license with ULLicensee=North Carolina State University/5618801100 Not for Resale, 10/20/2006 02:57:00 MDTNo reproduction or networking permitted without license from IHS -,-,- UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTIO
15、N WITHOUT PERMISSION FROM UL UL will attempt to answer support requests concerning electronic versions of its Standards. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request. UL supports the electronic versions of its St
16、andards only if they are used under the conditions and operating systems for which it is intended. ULs support policies may change from time-to-time without notifi cation. UL reserves the right to change the format, presentation, fi le types and formats, delivery methods and formats, and the like of
17、 both its printed and electronic Standards without prior notice. Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorneys fees) resulti
18、ng from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. If a single-user version electronic Standard was purchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN fi le-
19、server or the permanent storage device of a multiple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access. If a multiple-user version electronic Standard was purchased, one copy of the Standar
20、d may be stored on a single LAN fi le-server, or on the permanent storage device of a multiple-user computer, or on an Intranet server. The number of concurrent users shall not exceed the number of users authorized. Electronic Standards are intended for on-line use, such as for viewing the requireme
21、nts of a Standard, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version of an electronic Standard. Only one copy of the Standard may be printed for each authorized user of a multiple-user version of an electronic Standard. Because of diff
22、erences in the computer/software/printer setup used by UL and those of electronic Standards purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard. An employee of an organization purchasing a UL Standard can make a copy of the p
23、age or pages being viewed for their own fair and/or practical internal use. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, fi gures, and/or other elements of the Standard having future effective dates as indicated in the note following the affecte
24、d item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. New product submittals made prior to a specifi ed future effective date will be judged under all of the requireme
25、nts in this Standard including those requirements with a specifi ed future effective date, unless the applicant specifi cally requests that the product be judged under the current requirements. However, if the applicant elects this option, it should be noted that compliance with all the requirements
26、 in this Standard will be required as a condition of continued Listing, Classifi cation, and Follow-Up Services after the effective date, and understanding of this should be signifi ed in writing. Copyright 2005 Underwriters Laboratories Inc. This Standard consists of pages dated as shown in the fol
27、lowing checklist: PageDate 1-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . January 21, 2005 A1-A2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28、. . . . . . . . . . . . . . . . . . . . . . January 21, 2005 JANUARY 21, 2005 UL 1978tr2 Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULLicensee=North Carolina State University/5618801100 Not for Resale, 10/20/2006 02:57:00 MDTNo reproduction or networking permitted wi
29、thout license from IHS -,-,- UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 21, 2005 1 UL 1978 Standard for Grease Ducts First Edition March, 1995 Second Edition June, 2002 Third Edition January 21, 2005 The most recent designation
30、of ANSI/UL 1978 as an American National Standard (ANSI) occurred on January 4, 2005. This ANSI/UL Standard for Safety, which consists of the Third edition is under continuous maintenance, whereby each revision is ANSI approved upon publication. Comments or proposals for revisions on any part of the
31、Standard may be submitted to UL at any time. Written comments are to be sent to UL-RTP Standard Department, 12 Laboratory Dr., P.O. Box 13995, Research Triangle Park, NC, 27709-3995. An effective date included as a note immediately following certain requirements is one established by Underwriters La
32、boratories Inc. Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of rev
33、ised requirements. ISBN 0-7629-1052-6 COPYRIGHT 1995, 2005 UNDERWRITERS LABORATORIES INC. ANSI/UL 1978-2005 Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULLicensee=North Carolina State University/5618801100 Not for Resale, 10/20/2006 02:57:00 MDTNo reproduction or netw
34、orking permitted without license from IHS -,-,- UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 21, 2005GREASE DUCTS - UL 19782 No Text on This Page Copyright Underwriters Laboratories Inc. Provided by IHS under license with ULLicens
35、ee=North Carolina State University/5618801100 Not for Resale, 10/20/2006 02:57:00 MDTNo reproduction or networking permitted without license from IHS -,-,- UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope . . . .
36、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37、 . . . . . .5 3 Units of Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 4 Undated References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38、 . . . . . . . . . .6 5 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 6 Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39、 . . . . . . . . . . . . . . . . . . . . . . .6 CONSTRUCTION 7 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 8 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 9 Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 10 Support Assembly . . . . . . . . .
41、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 PERFORMANCE 11 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 12 Tes
42、t Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 13 Temperature Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 1
43、4 Temperature Test 500F (260C) Flue Gases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 15 Abnormal Temperature Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 16 Leakage Test . . . . . . . .
44、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 17 Vertical Support Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 18 Strength Tests
45、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 18.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 18.2
46、Impact test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 18.3 Longitudinal force test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 18.4 Load t
47、est for grease duct elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 18.5 Grease duct joint load test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 18.6 Grease duct joint torsion test
48、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 19 Fire And Leakage Test Of Grease Duct Access Doors and Fittings . . . . . . . . . . . . . . . . . . . . . . .26 20 Pressure Tests For Fittings Exposed To Fire Extinguishing System Pressure . . . . . . . . . . . . . .27 21 Tensile Strength, Elongation, And Change In Volume Tests Of Gaskets And Seals. . . . . . . .28 21.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .