UL-1977-1995.pdf

《UL-1977-1995.pdf》由会员分享，可在线阅读，更多相关《UL-1977-1995.pdf（30页珍藏版）》请在三一文库上搜索。

1、UL 1977 ISBN 1-55989-948-4 Component Connectors for Use in Data, Signal, Control and Power Applications Underwriters Laboratories Inc. (UL) 333 Pfi ngsten Road Northbrook, IL 60062-2096 UL Standard for Safety for Component Connectors for Use in Data, Signal, Control and Power Applications, UL 1977 F

2、irst Edition, Dated December 22, 1995 Revisions: This Standard contains revisions through and including October 18, 2002. Text that has been changed in any manner is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by a

3、n effective date note indicating the date of publication or the date on which the changed requirement becomes effective. UL Standards for Safety are developed and maintained in the Standard Generalized Markup Language (SGML). SGML - an international standard (ISO 8879-1986) - is a descriptive markup

4、 language that describes a documents structure and purpose, rather than its physical appearance on a page. Due to formatting differences resulting from the use of ULs new electronic publishing system, please note that additional pages (on which no requirements have been changed) may be included in r

5、evision pages due to relocation of existing text and reformatting of the Standard. The revised requirements are substantially in accordance with ULs Bulletin on this subject dated June 24, 2002. The bulletin is now obsolete and may be discarded. The revisions dated October 18, 2002 include a reprint

6、ed title page (page1) for this Standard. As indicated on the title page (page 1), this UL Standard for Safety is an American National Standard. Attention is directed to the note on the title page of this Standard outlining the procedures to be followed to retain the approved text of this ANSI/UL Sta

7、ndard. The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions regarding the accuracy of this Standard. ULs Standards

8、for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the fi le for the Standard on the distribution diskette should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those S

9、tandards shall remain the sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. Revisio

10、ns of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties

11、 of merchantability or fi tness for any purpose. OCTOBER 18, 2002 UL 1977tr1 In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profi ts, lost savings, loss of data, or any other damages arising out of the use of or the inability

12、to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. UL will attempt to answer support requests concern

13、ing electronic versions of its Standards. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request. UL supports the electronic versions of its Standards only if they are used under the conditions and operating systems for wh

14、ich it is intended. ULs support policies may change from time-to-time without notifi cation. UL reserves the right to change the format, presentation, fi le types and formats, delivery methods and formats, and the like of both its printed and electronic Standards without prior notice. Purchasers of

15、the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electro

16、nic Standard on the purchasers computer system. If a single-user version electronic Standard was purchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN fi le-server or the permanent storage device of a multiple-user computer in such a ma

17、nner that this Standard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access. If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored on a single LAN fi le-server, or on the permanent storage devic

18、e of a multiple-user computer, or on an Intranet server. The number of concurrent users shall not exceed the number of users authorized. Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the

19、 Standard may be printed from each single-user version of an electronic Standard. Only one copy of the Standard may be printed for each authorized user of a multiple-user version of an electronic Standard. Because of differences in the computer/software/printer setup used by UL and those of electron

20、ic Standards purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard. An employee of an organization purchasing a UL Standard can make a copy of the page or pages being viewed for their own fair and/or practical internal use. The

21、 requirements in this Standard are now in effect, except for those paragraphs, sections, tables, fi gures, and/or other elements of the Standard having future effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a

22、future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. New product submittals made prior to a specifi ed future effective date will be judged under all of the requirements in this Standard including those requirements with a specifi ed future effe

23、ctive date, unless the applicant specifi cally requests that the product be judged under the current requirements. However, if the applicant elects this option, it should be noted that compliance with all the requirements in this Standard will be required as a condition of continued and Follow-Up Se

24、rvices after the effective date, and understanding of this should be signifi ed in writing. Copyright 2002 Underwriters Laboratories Inc. OCTOBER 18, 2002 UL 1977tr2 This Standard consists of pages dated as shown in the following checklist: PageDate 1-6 . . . . . . . . . . . . . . . . . . . . . . .

25、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . October 18, 2002 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . December 12, 2000 8 . . . . . .

26、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . October 18, 2002 8A-8B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27、 . December 12, 2000 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . December 22, 1995 10-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28、 . . . . . . . . . . . . . . . . . . . October 18, 2002 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . November 4, 1997 15-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . December 22, 1995 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . October 18, 2002 18-20 . . . . . . . . . . . . . . . . . .

30、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . December 12, 2000 A1-A2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . December 22, 1995 OCTOBER 18, 200

31、2 UL 1977tr3 OCTOBER 18, 2002 UL 1977tr4 No Text on This Page DECEMBER 22, 1995 (Title Page Reprinted: October 18, 2002) 1 UL 1977 Standard for Component Connectors for Use in Data, Signal, Control and Power Applications First Edition December 22, 1995 Approval as an American National Standard (ANSI

32、) covers the numbered paragraphs on pages dated December 22, 1995, March 6, 1998, and January 8, 1999. These pages should not be discarded when revised or additional pages are issued if it is desired to retain the ANSI approved text. An effective date included as a note immediately following certain

33、 requirements is one established by Underwriters Laboratories Inc. Approved as ANSI/UL 1977-1998, July 7, 1998 Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisi

34、ons, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. ISBN 1-55989-948-4 COPYRIGHT 1995, 2002 UNDERWRITERS LABORATORIES INC. ANSI/UL 1977-1998 OCTOBER 18, 2002UL 19772 No Text on This Page CONTENTS FOREWORD . . . . . . . . . . . . . . . . .

35、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 INTRODUCTION 1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36、 . . .5 2 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 3 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37、 . . . . . . . . . . . . . . . . .7 4 Units of Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38、 . . . . . . . . . . . . . . . . . . . . . . . . . .8 CONSTRUCTION 6 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 7 Insulating Materials . . . . . . . . . . . . . . . . . . . . . .

39、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 8 Current-Carrying Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8A 9 Grounding and Dead-Metal Parts . . . . . . . . . .

40、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 10 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 10.1 General . . . . . . . . . . . . . . . . .

41、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 10.2 Accessibility of live parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 10.3 Connection between mating devices . . . . . .

42、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 11 Spacings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 PERFORMANCE 12 General . . . . . . . . . . . . . . . . . . .

43、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 13 Accelerated Aging Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 13.1 Rubber compounds . . . . .

44、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 13.2 PVC compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 14 Mold Stress Relief Test . . . . . . . . . .

45、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 15 Overload Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 16 Temperature Test . . . . . . .

46、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 17 Dielectric Voltage-Withstand Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 18 Resistance To Arcing Test . .

47、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 19 Conductor Secureness Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 19A Flammability Test . . . . . . . .

48、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 MARKINGS 20 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 APPENDI

49、X A Standards for Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1 OCTOBER 18, 2002UL 19773 FOREWORD A. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in the Scope section of this Standard. These requirements are based upon sound engineering principles, research, records of tests and fi eld experience, and an appreciation of the problems of