UL-687-2005.pdf

《UL-687-2005.pdf》由会员分享，可在线阅读，更多相关《UL-687-2005.pdf（34页珍藏版）》请在三一文库上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 687 ISBN 0-7629-1115-8 Burglary-Resistant Safes UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL -,-,- UL COPYRIGHTED MATERIAL NOT A

2、UTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Underwriters Laboratories Inc. (UL) 333 Pfi ngsten Road Northbrook, IL 60062-2096 UL Standard for Safety for Burglary-Resistant Safes, UL 687 Fourteenth Edition, Dated October 7, 2005 Summary of Topics The new edition of U

3、L 687 includes the addition of 3/4-inch (19.1-mm)/75,000 psi (518 MPa) value to paragraphs 5.1.4, 6.1.4, and 9.1.4 for intermediate material thickness; revisions to paragraphs 5.1.5 and 6.1.5 to alter the attack resistance time to determine equivalency of materials; deletion of paragraph 1.4 removin

4、g issues specifi c to certifi cation; and indicates that the standard has been approved as an American National Standard. UL Standards for Safety are developed and maintained in the Standard Generalized Markup Language (SGML). SGML - an international standard (ISO 8879-1986) - is a descriptive marku

5、p language that describes a documents structure and purpose, rather than its physical appearance on a page. Due to formatting differences resulting from the use of ULs new electronic publishing system, please note that additional pages (on which no requirements have been changed) may be included in

6、revision pages due to relocation of existing text and reformatting of the Standard. Text that has been changed in any manner is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the d

7、ate of publication or the date on which the changed requirement becomes effective. The new and/or revised requirements are substantially in accordance with ULs Bulletin(s) on this subject dated November 19, 2004 and August 12, 2005 . The bulletin(s) is now obsolete and may be discarded. As indicated

8、 on the title page (page 1), this UL Standard for Safety is an American National Standard. Attention is directed to the note on the title page of this Standard outlining the procedures to be followed to retain the approved text of this ANSI/UL Standard. As indicated on the title page (page1), this U

9、L Standard for Safety has been adopted by the Department of Defense. The UL Foreword is no longer located within the UL Standard. For information concerning the use and application of the requirements contained in this Standard, the current version of the UL Foreword is located on ULStandardsInfoNet

10、 at: http:/ The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions regarding the accuracy of this Standard. ULs Stand

11、ards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the fi le for the Standard on the distribution diskette should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding th

12、ose Standards shall remain the sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. OC

13、TOBER 7, 2005 UL 687tr1 UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL pr

14、ovides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or fi tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including

15、loss of profi ts, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price p

16、aid for this Standard, regardless of the form of the claim. UL will attempt to answer support requests concerning electronic versions of its Standards. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request. UL supports th

17、e electronic versions of its Standards only if they are used under the conditions and operating systems for which it is intended. ULs support policies may change from time-to-time without notifi cation. UL reserves the right to change the format, presentation, fi le types and formats, delivery metho

18、ds and formats, and the like of both its printed and electronic Standards without prior notice. Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgement (including rea

19、sonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. If a single-user version electronic Standard was purchased, one copy of this Standard may be stored on the hard disk of a single personal comp

20、uter, or on a single LAN fi le-server or the permanent storage device of a multiple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access. If a multiple-user version electronic Standard was pur

21、chased, one copy of the Standard may be stored on a single LAN fi le-server, or on the permanent storage device of a multiple-user computer, or on an Intranet server. The number of concurrent users shall not exceed the number of users authorized. Electronic Standards are intended for on-line use, su

22、ch as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version of an electronic Standard. Only one copy of the Standard may be printed for each authorized user of a multiple-user version of an elect

23、ronic Standard. Because of differences in the computer/software/printer setup used by UL and those of electronic Standards purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard. An employee of an organization purchasing a UL St

24、andard can make a copy of the page or pages being viewed for their own fair and/or practical internal use. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, fi gures, and/or other elements of the Standard having future effective dates as indicated in

25、 the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. New product submittals made prior to a specifi ed future effective date will be ju

26、dged under all of the requirements in this Standard including those requirements with a specifi ed future effective date, unless the applicant specifi cally requests that the product be judged under the current requirements. However, if OCTOBER 7, 2005 UL 687tr2 -,-,- UL COPYRIGHTED MATERIAL NOT AUT

27、HORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL the applicant elects this option, it should be noted that compliance with all the requirements in this Standard will be required as a condition of continued Listing, Recognition and Follow-Up Services after the effective dat

28、e, and understanding of this should be signifi ed in writing. Copyright 2005 Underwriters Laboratories Inc. This Standard consists of pages dated as shown in the following checklist: PageDate 1-28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29、 . . . . . . . . . . . . . . . . . . . . . . October 7, 2005 OCTOBER 7, 2005 UL 687tr3 UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 7, 2005 UL 687tr4 No Text on This Page UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUC

30、TION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 7, 2005 1 UL 687 Standard for Burglary-Resistant Safes First Edition June, 1938 Second Edition June, 1943 Third Edition January, 1953 Fourth Edition May, 1955 Fifth Edition June, 1960 Sixth Edition August, 1967 Seventh Edition July, 1972 Eighth

31、 Edition December, 1977 Ninth Edition January, 1982 Tenth Edition September, 1987 Eleventh Edition December, 1991 Twelfth Edition May, 1995 Thirteenth Edition August, 2000 Fourteenth Edition October 7, 2005 The most recent designation of ANSI/UL 687 as an American National Standard (ANSI) occurred o

32、n October 7, 2005. This ANSI/UL Standard for Safety, which consists of the Fourteenth Edition with revisions through October 7, 2005 is under continuous maintenance, whereby each revision is ANSI approved upon publication. Comments or proposals for revisions on any part of the Standard may be submit

33、ted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. An effective date included as a note immediately following certain requirements is one established by Underwriters Laboratories Inc. The Department

34、of Defense (DoD) has adopted UL 687 on June 10, 1976. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if

35、it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. ISBN 0-7629-1115-8 COPYRIGHT 1977, 2005 UNDERWRITERS LABORATORIES INC. ANSI/UL 687-2005 -,-,- UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR F

36、URTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 7, 2005BURGLARY-RESISTANT SAFES - UL 6872 No Text on This Page -,-,- UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRODUCTION 1 Scope . . . . . . . . . . . .

37、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 2 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38、.8 2.1 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2.2 Units of measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2.3

39、 Undated references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 3 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40、. . . .8 CONSTRUCTION 4 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 4.1 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41、 . . . . . . . . . . . . . . . . . .10 4.2 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 4.3 Corrosion protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42、. . . . . . . . . . . . . . . . . . .11 5 Class TL-15 and Deposit Safes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 5.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43、. . . . . . . . . . . . . . . . . . .11 5.2 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 6 Class TL-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44、. . . . . . . . . . . . . . . . . . . . . . . . . . . .12 6.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 6.2 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 7 Class TL-15X6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 7.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 7.2 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 8 Class TL-30X6 . . . . . . . . . . . . . . . . . . . . . . . .

47、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 8.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 8.2 Locks . . . . . . . . . . . . . . . . . . . . .

48、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 9 Class TRTL-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 9.1 General . . . . . . . . . . . . .

49、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 9.2 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 10 Classes TRTL-15X6, TRTL-30X6, and