《SpringerLNCS模板.docx》由会员分享，可在线阅读，更多相关《SpringerLNCS模板.docx（7页珍藏版）》请在三一文库上搜索。
1、SpringerLNCS 模板Lecture Notes in Computer Science:Authors5 Instructions for the Preparationof Camera-Ready Contributionsto LNCS/LNAI/LNBI ProceedingsAlfred Hofmann Please note that the LNCS Editorial assumes that all authors have used the western naming convention, with given names preceding surnames
2、. This determines the structure of the names in the running heads and the author index. Brigitte Apfel1, Ursula Barth1, Christine Gunther1,Ingrid Haas1, Frank Holzwarth1, Anna Ki amer1, Leonie Kunz1,Nicole Sator1, Erika Siebert-Cole1 and Peter StraBer1,1 Springer-Verlag, Computer Science Editorial,
3、Tiergartenstr. 17,69121 Heidelberg, GermanyAlfred.Hofmann, BrigitteApfel, Ursula.Barth, Christine.Guenther,Ingrid.Haas, FrankHokwarth, Anna.Kramer, Leonie.Kunz,Nicole.Sator, Erika.Siebert-Cole, Peter.Strasser, L、CSSpriD¥Abstract. The abstract should summaiize the contents of the paper and shoul
4、d contain at least 70 aud at most 150 words. It should be set in 9-point font size and should be inset 1.0 cm from the right and left margins. There should be two blank (10-point) lines before and after the abstract. This document is in the required format.Keywords: We would like to encourage vou to
5、 list vour keywords in this section.1 IntroductionThis instruction file for Word users (there is a separate instruction file for LaTeX users) may be used as a template. Kindly send the final and checked Word and PDF files of your paper to the Contact Volume Editor. This is usually one of the organiz
6、ers of the conference. You should make sure that the Word and the PDF files are identical and correct and that only one version of your paper is sent. It is not possible to update files at a later stage. Please note that we do not need the printed paper.We would like to draw your attention to the fa
7、ct that it is not possible to modify a paper in any way, once it has been published. This applies to both the pnnted book and the online version of the publication. Every detail, includingthe order of the names of the authors, should be checked before the paper is sent to the Volume Editors.1.1 Chec
8、king the PDF FileKindly assure that the Contact Vo加me Editor is given the name and email address of the contact author for your paper. The Contact Volume Editor uses these details to compile a list for our production department at SPS in India. Once the files have been worked upon, SPS sends a copy
9、of the final pdf of each paper to its contact author. The contact author is asked to check through the final pdf to make sure that no errors have crept in during the transfer or preparation of the files. This should not be seen as an opportunity to update or copyedit the papers, which is not possibl
10、e due to time constraints. Only errors introduced during the preparation of the files will be corrected.This round of checking takes place about two weeks after the files have been sent to the Editorial by the Contact Volume Editor, i.eM roughly seven weeks before the start of the conference for con
11、ference proceedings, or seven weeks before the volume leaves the printer's, for post-proceedings. If SPS does not receive a reply from a particular contact author, within the (imeframe given, then it is presumed that the author has found no errors in the paper. The tight publication schedule of
12、LNCS does not allow SPS to send reminders or search for alternative email addresses on the Internet.In some cases, it is the Contact Volume Editor that checks all the pdfs. In such cases, the authors are not involved in the checking phase.1.2 Additional Information Required by the Volume EditorIT yo
13、u have more than one surname, please make sure that the Volume Editor knows how you are to be listed in the author index.1.3 Copyright FormsFlic copyright form may be downloaded from the Eor Authors section of the LNCS Webpage: r、，>Rrinicr.ccmnncq. Please send your signed copyright form to the Co
14、ntact Volume Editor, either as a scanned pdf or by fax or by courier. One author may sign on behalf of all of the other authors of a particular paper. Digital signatures are acceptable.2 Paper PreparationThe printing area is 122 mm * 193 mm. The text should be justified to occupy the full line width
15、, so that the right margin is not ragged, with words hyphenated as appropriate. Please fill pages so that the length of the text is no less than 180 mm, if possible.Use 10-point type for the name(s) of the author(s) and 9-point type for the address(es) and the abstiact. For the main text, please use
16、 10-point type and single-line spacing. We recommend the use of Computer Modern Roman or Times. Italic type may be used to emphasize words in running text. Bold type and underlining should be avoided.Papers not comphing with the LNCS style will be reformatted. This can lead to an increase in the ove
17、rall number of pages. We would therefore urge you not to squash your paper.Headings. Headings should be capitalized (i.e., nouns, verbs, and all other words except articles, prepositions, and conjunctions should be set with an initial capital) and should, with the exception of the title, be aligned
18、to the left. Words joined by a hyphen are subject to a special rule. If the fii st word can stand alone, the second word should be capitalized. The font sizes are given in Table 1.Here are some examples of headings: "Criteria to Disprove Context-Freeness of Collage Languages11, “On Correcting t
19、he Intrusion of Tracing Non-deterministic Programs by Software", MA User-Friendly and Extendable Data Distribution System11, "Multi-flip Networks: Parallelizing GenSATM, nSelf-determinations of Man".Table 1. Font sizes of headings. Table captions should always be positioned above the
20、tables.Heading levelExampleFont size and styleTitle (centered)Lecture Notes 14 point, boldlst-level heading1Introduction12 point, bold2nd-level heading2.1 Printing Area10 point, bold3rd-level headingHeadings. Text follows .10 point, bold妙-level headingRemark. Text follows .10 point, italicLemmas, Pr
21、opositions, and Theorems. The numbers accorded to lemmas, propositions, and theorems, etc. should appear in consecutive order, starting mth Lemma 1, and not, for example, with Lemma 11.2.1 FiguresPlease check that the lines in line drawings are not interrupted and have a constant width. Grids and de
22、tails within the figures must be clearly legible and may not be written one on top of the other. Line drawings should have a resolution of at least 800 dpi (preferably 1200 dpi). The lettering in figures should have a height of 2 mm (10-point type). Figures should be numbered and should have a capti
23、on which should always be positioned under the figures, in contrast to the caption belonging to a table, which should always appear above the table. Please center the captions behveen the margins and set them in 9-point type (Fig. 1 shows an example). The distance betw een text and figure should be
24、about 8 mm, the distance behveen figure and caption about 6 mm.To ensure that the reproduction of your illustrations is of a reasonable quality, we advise against the use of shading. The conh ast should be as pronounced as possible.If screenshots are necessary, please make sure that you are happy wi
25、th the print quality before you send the files.Remark 1. In the printed volumes, illustiations are generally black and white (halftones), and only in exceptional cases, and if the author is prepared to cover the extra costs involved, are colored pictures accepted. Colored pictures are welcome in the
26、 electronic version free of charge. If you send colored figures that are to be piinted in black and white, please make sure that they really are legible in black and white. Some colors show up very poorly when printed in black and white.-25XSXjFig. 1. One kernel at (dotted kernel) or two kernels at
27、Xj and xj (left and right) lead to the same summed estimate at xs. This shows a figure consisting of different types of lines. Elements of the figure described in the caption should be set in italics, in parentheses, as shown in this sample caption.2.2 FormulasDisplayed equations or formulas are cen
28、tered and set on a separate line (with an extra line or halfline space above and below). Displayed expressions should be numbered for reference. The numbers should be consecutive within each section or within the contribution, with numbers enclosed in parentheses and set on the right margin.x + y =
29、z .(1)Equations should be punctuated in the same way as ordinaiy text but with a small space before the end punctuation mark.2.3 FootnotesThe superscript numeral used to refer to a footnote appears in the text either dii ectly after the word to be discussed or - in relation to a phrase or a sentence
30、 - following the punctuation mark (comma, semicolon, or period). Footnotes should appear at the bottom of the normal text area, with a line of about 5cm set iminediatelv above them2. .2.4 Program CodeProgram listings or program commands in the text are normally set in typewriter font, e.g., CMTT10 o
31、r Courier.Example of a Computer Program from Jensen K., Wirth N. (1991) Pascal user manual and report. Springer, New Yorkprogram Inflation (Output)Assuming annual inflation rates of 7%, 8%, and10% , . . . years ;const MaxYears = 10;var Year: 0.MaxYears;Factorl, Factor2, Factor3: Real;beginThe footno
32、te numeral is set flush left and the text follows with the usual word spacing.Year := 0;Factorl := 1.0; Factor2 := 1.0; Factor3 := 1.0;WriteLn('Year 7% 8% 10%1); WriteLn; repeatYear := Year + 1;Factorl:=Factorl*1.07;Factor2:=Factor2*1.08;Factor3:=Factor3*1.10;WriteLn(Year:5,Factorl:7:3,Fac七。r2:7
33、:3,Factor3:7:3) until Year = MaxYears end.1.5 CitationsFor citations in the text please use square brackets and consecutive numbers: 1, 2, 3, etc.1.6 Page Numbering and Running HeadsThere is no need to include page numbers. If your paper title is too long to serve as a running head, it mil be shorte
34、ned. Your suggestion as to how to shorten it would be most welcome.3 LNCS OnlineThe online version of the volume will be available in LNCS Online. Members of institutes subscribing to the Lecture Notes in Computer Science series have access to all the pdfs of all the online publications. Non-subscri
35、bers can only read as far as the abstracts. If they tiy to go beyond this point, they are automatically asked, whether they would like to order the pdf, and are given instructions as to how to do so.Please note that, if your email address is given in your paper, it will also be included in the meta
36、data of the online version.4 BibTeX Enti iesThe correct BibTeX entries for the Lecture Notes in Computer Science volumes can be found at the following Website shortly after the publication of the book: http:/v.informatikuni-trier.deMev/db/iournals/lncs.htmlAcknowledgments. The heading should be trea
37、ted as a 3rd level heading and should not be assigned a number.5 The References SectionIn order to permit cross referencing within LNCS-Online, and eventually between different publishers and their online databases, LNCS will, from now on, be standardizing the format of the references. This new feat
38、ure will increase the visibility of publications and facilitate academic research considerably. Please base your references on the examples below. References that don't adhere to this style will be reformatted by Springer. You should therefore check your references thoroughly when you receive th
39、e final pdf of your paper. The reference section must be complete. You may not omit references. Instructions as to where to find a fuller version of the references are not permissible.We only accept references written using the latin alphabet If the title of the book you are referring to is in Russi
40、an or Chinese, then please write (in Russian) or (in Chinese) at the end of the ti anscript or translation of the title.The following section shows a sample reference list with entries for journal articles 1, an LNCS chapter 2, a book 3, proceedings without editors 4 and 5, as well as a URL 6. Pleas
41、e note that proceedings published in LNCS are not cited with their full titles, but with their acronyms!References1. Smith, T.F., Waterman, M.S.: Identification of Common Molecular Subsequences. J. Mol. Biol. 147,195-197 (1981)2. May, P.，Ehrlich, H.C., Steinke, T.: ZIB Structure Prediction Pipeline:
42、 Composing a Complex Biological Workflow through Web Sendees. In: Nagel, W.E., Walter, W.W, Lehuer, W.(eds.) Euro-Par 2006. LNCS, vol. 4128, pp. 1148-1158. Springer, Heidelberg (2006)3. Foster, L, Kesselman, C.: The Grid: Blueprint for a New Computing Infrastructure. Morgan Kaufmann, San Francisco (
43、1999)4. Czajkowski, K., Fitzgerald, S., Foster, I., Kesselman, C.: Grid Information Sendees for Distributed Resource Sharing. In: 10th IEEE International Symposium on High Performance Distnbuted Computing, pp. 181-184. IEEE Press, New York (2001)5. Foster, L, Kesselman, C., Nick, J” Tuecke, S.: The
44、Physiology of the Grid: an Open Grid Services Architecture for Distributed Systems Integration. Technical report, Global Grid Forum (2002)6. National Center for Biotechnology Information, http:/www.ncbi.nlin.nili.govAppendix: Springer-Author DiscountLNCS authors are entitled to a 33.3% discount off
45、all Springer publications.Before placing an order, they should send an email toorders-HD-individiials , giving full details of their Springer publication, to obtain a so-called token. This token is a number, which must be entered when placing an order via the Internet, in order to obtain the discount.Checklist of Items to be Sent to Volume Editors1. A final Word or RTF file2. A final PDF file3. A copyright form, signed by one author on behalf of all of the authors of the paper4. A readme giving the name and email address of the corresponding author