《WHOCPP药品证明书-参考格式.docx》由会员分享，可在线阅读，更多相关《WHOCPP药品证明书-参考格式.docx（5页珍藏版）》请在三一文库上搜索。
1、精品文档Model certificate of a pharmaceutical productPlease refer to the guidelines for full instructions on how to complete this form and information on the implementation of the Scheme.The forms are suitable for generation by computer. They should always be submitted as hard copy, with responses print
2、ed in type rather than handwritten.Additional sheets should be appended, as necessary, to accommodate remarks and explanations. Certificate of a pharmaceutical productThis certificate conforms to the format recommended by the World Health OrganizationNo. of certificateExporting (certifying country):
3、Importing (requesting country):1. Name and dosage form of the product:1.1. Active ingredient(s) 2 and amount(s) per unit dose 3: For complete composition including excipients, see attached:1.2. Is this product licensed to be placed on the market for use in the exporting country?5 (yes/no)1.3 Is this
4、 product actually on the market in the exporting country?If the answer to 1.2. is yes, continue with section 2A and omit section 2B.If the answer to 1.2 is no, omit section 2A and continue with section 2B6:2.A.1. Number of product licence 7 and date of issue:2.A.2. Product licence holder (name and a
5、ddress):2.A.3. Status of product licence holder8: (Key in appropriate category as defined in note 8)2.A.3.1. For categories b and c the name and address of the manufacturer producing the dosage form .9is :2.A.4. Is a summary basis for approval appended?10 (yes/no)122.A.5. Is the attached, officially
6、 approved product information complete and consonent with the licence? Does the information submitted by the applicant satisfy the certifying authority on all aspects of the manufacture of the product16: (yes/no) If no, explain: Address of certifying authority: Telephone: Fax: Name of authorized per
7、son: Signature Stamp and date (yes/no/not provided)2.A.6. Applicant for certificate, if different from licence holder (name and address)2.8.1. Applicant for certificate (name and address):2.8.2. Status of applicant: (Key in appropriate category as defined in footnote 8)2.B.2.1. For categories (b) an
8、d (c) the name and address of the manufacturer producingthe dosageform3欢在下载-9is:2.8.3. Why is marketing authorization lacking? (not required/not requested/under consideration/refused)132.8.4. Remarks143. Does the certifying authority arrange for periodic inspection of the manufacturing plant in whic
9、h the dosage form is produced? (yes/no/not applicable)If not or not applicable, proceed to question 4.3.1. Periodicity of routine inspections (years):153.2. Has the manufacture of this type of dosage form been inspected? (yes/no)3.3. Do the facilities and operations conformto GMP as recommended by t
10、he World Health Organization?14 (yes/no/not applicable)精品文档Explanatory notes1. This certificate, which is in the format recommended by WHO, establishes the status of the pharmaceutical product and of the applicant for the certificate in the exporting country. It is for a single product only since ma
11、nufacturing arrangements and approved information for different dosage forms and different strengths can vary.2. Use, whenever possible, International Nonproprietary Names (INNs) or national nonproprietary names.3. The formula (complete composition) of the dosage form should be given on the certific
12、ate or be appended.4. Details of quantitative composition are preferred but their provision is subject to the agreement of the product-licence holder.5. When applicable, append details of any restriction applied to the sale, distribution or administration of the product that is specified in the prod
13、uct licence.6. Sections 2A and 2B are mutually exclusive.7. Indicate, when applicable, if the licence is provisional, or the product has not yet been approved.8. Specify whether the person responsible for placing the product on the market:a. manufactures the dosage form;b. packages and/or labels a d
14、osage form manufactured by an independent company; orc. is involved in none of the above.9. This information can only be provided with the consent of the product-licence holder or, inthe case of non-registered products, the applicant. Non-completion of this section indicates that the party concerned
15、 has not agreed to inclusion of this information. It should be noted that information concerning the site of production is part of the product licence. If the production site is changed, the licence has to be updated or it is no longer valid.10. This refers to the document, prepared by some national
16、 regulatory authorities, that summarizes the technical basis on which the product has been licensed.11. This refers to product information approved by the competent national regulatory authority, such as Summary Product Characteristics (SPC)12. In this circumstance, permission for issuing the certif
17、icate is required from the product-licence holder. This permission has to be provided to the authority by the applicant.13. Please indicate the reason that the applicant has provided for not requesting registration.a. the product has been developed exclusively for the treatment of conditionsparticul
18、arly tropical diseases not endemic in the country of export;b. the product has been reformulated with a view to improving its stability under tropical conditions;c. the product has been reformulated to exclude excipients not approved for use in pharmaceutical products in the country of import;d. the
19、 product has been reformulated to meet a different maximum dosage limit for an active ingredient;e. any other reason, please specify.14. Not applicable means the manufacture is taking place in a country other than that issuing the product certificate and inspection is conducted under the aegis of th
20、e country of manufacture.15. The requirements for good practices in the manufacture and quality control of drugs referredto in the certificate are those included in the thirty-second report of the Expert Committeeon Specifications for Pharmaceutical Preparations, WHOTechnical Report Series No. 823,
21、1992, Annex 1. Recommendations specifically applicable to biological products have been formulated by the WHO Expert Committee on Biological Standardization (WHO Technical Report Series, No.822, 1992, Annex 1).16. This section is to be completed when the product-licence holder or applicant conforms
22、to status (b) or (c) as described in note 8 above. It is of particular importance when foreigncontractorsare involved in the manufacture of the product. In these circumstances the applicant shouldsupply the certifying authority with information to identify the contracting partiesresponsible for each stage of manufacture of the finished dosage form, and the extent and nature of any controls exercised over each of these parties.4欢迎下载 。精品文档欢迎您的下载,资料仅供套考!致力为企业和个人提供合同协议， 策划案计划书，学习资料等等打造全网一站式需求5欢在下载