《奉化、宁海收费所大棚修复工程开工报告》.doc

上传人:本田雅阁 文档编号:2062568 上传时间:2019-02-09 格式:DOC 页数:45 大小:241.51KB
返回 下载 相关 举报
《奉化、宁海收费所大棚修复工程开工报告》.doc_第1页
第1页 / 共45页
《奉化、宁海收费所大棚修复工程开工报告》.doc_第2页
第2页 / 共45页
《奉化、宁海收费所大棚修复工程开工报告》.doc_第3页
第3页 / 共45页
亲,该文档总共45页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

《《奉化、宁海收费所大棚修复工程开工报告》.doc》由会员分享,可在线阅读,更多相关《《奉化、宁海收费所大棚修复工程开工报告》.doc(45页珍藏版)》请在三一文库上搜索。

1、奉化、宁海收费所大棚 修 复 工 程开工报告宁波卓泰建设工程有限公司2014年12月6日奉化、宁海收费所大棚修复工程承包单位:宁波卓泰建设工程有限公司 监理单位:浙江公路水运工程咨询监理公司合同号: / 编号: 02 浙路(JB)102项目开工报告申请 年 月 日申请开工日期2014.1128计划完工日期2014.12.27共计划日历天30天合同规定工期2014年11月28日至2014年12月27日历时30天承包人主要施工准备工作情况自检说明主要施工管理人员到位情况(含合同规定人员替换情况)详见附表主要施工机具设备到场情况详见附表主要材料采购意向及进场情况详见附表质量保证(或IS09002管理

2、)体系建立情况详见附表安全质量自检机构建立情况详见附表施工驻地及临时工程(含借地)设备情况详见附表工地试验室建立及临时资质报批情况详见附表其他有关情况说明详见附表附件无 负责人: 年 月 日监理审批意见试验监理工程师专业监理工程师驻地(总)监理工程师签名日期注:合同段工程只有当本表内容审核符合合同或有关要求时,才可进行“分项工程”的开工审批施工技术方案报审表合同号: / (编号:2013-001) 项目名称:奉化、宁海收费所大棚修复工程 施工单位:宁波卓泰建设有限公司致(驻地监理工程师) : 现报上工程的奉化、宁海收费所大喷修复工程施工技术方案,方案详细说明和图表见附件,请予以审核和批准。附件

3、:施工技术方案 承包人: 日期:专业监理工程师审查意见:专业监理工程师: 日期:驻地监理工程师审查意见:专业监理工程师: 日期:附注:特殊技术、工艺方案要经总监代表批准,一般由工程技术部批准由承包人呈报三份,审批后施工单位和驻地监理工程师办公室各留一份Opinions and suggestions on the partys mass line educational practiceAccording to the central and provincial, municipal unified deployment, according to municipal Party commi

4、ttee about carrying out the partys mass line educational practice activity in the citys implementation opinions, the spirit of the partys mass line educational practice activities from 20* in January to 99 months, carried out at all levels of departments and directly affiliated institutions and gras

5、s-roots party organizations. According to my actual County, the county to carry out the education practice put forward the following implementation opinions.First, the overall requirementsCounty county education practice to the eighteen Party of eight, the spirit of the the third Plenary Session of

6、the 18th CPC Central Committee as the guidance, conscientiously implement the spirit of general secretary Xi Jinping book series of important speech, earnestly implement the Central Committee really, opinions and advice , party implementing the guiding ideology of opinions to determine the objective

7、s and requirements, step method, in accordance with the look in the mirror, dress up, wash bath, cure treatment, the general requirements of for the people pragmatic honest people as the theme, in carrying forward the spirit of Zhuanglang Zhuang, improve their work style, service to the masses of th

8、e people, the foundation of consolidating grassroots, promote transformation across efforts, to further implement the central eight regulations and The opposition party and government austerity waste regulations , double section provincial regulations, municipal provisions of the twelve plan and the

9、 implementation measures for on improving the work style of close ties with the masses law, highlight style building, carry out the whole wind spirit, resolutely oppose formalism, bureaucracy, hedonism and wasteful extravagance to solve the problems, Party members and cadres of the style and the mas

10、ses of people strong, the Ministry of Party members and cadres to further improve their thinking and understanding, to further change the style of the wind, the masses to close, honest and pragmatic people honest image to further establish the foundation to further reinforce the basic level. Style o

11、f the building of the new results to promote the construction of a powerful force of the county and the ecological culture of the county and county construction.In educational practice activities of the unit is mainly: the county and below county departments under the organs, enterprises and institu

12、tions directly under the township, street, and community, village, non-public economic organizations, social organizations and other grass-roots organizations. Agencies and branches, each single unit, follow the rules on internal institutions. Educational practice with step by step.To adhere to the

13、county leadership, leadership and leading cadres to focus on outstanding catch to directly contact the service of the masses of law supervision departments and window units, service industry, educational practice, pay attention to grasp the heavy towns, streets and villages, community education acti

14、vities and the masses of grassroots groups in close contact to strengthen, and the majority of Party members, cadres and the mass line line Marx doctrine view of the masses and the partys education.Always speak seriously as a basic attitude, adhere to positive education, to carry out criticism and s

15、elf criticism group, adhere to the pragmatic, more emphasis on leadership, pay more attention to the layers of the demonstration, more focus on the four winds, solve the problem, pay more attention to open the door, the participation of the masses, pay more attention to the classification guidance.

16、Orderly, pay more attention to the cooperation and cohesion driven, more strict requirements on injection, really supervision practice, ensure education practice is not empty is not empty is not partial, not as a mere formality.Two, the key point of the taskThe main task of the countys education pra

17、ctice is to seize against four wind this focus on centralized solve outstanding problems asked County, township leadership and leading cadres of the four winds, the disadvantages of the style, scale behavior to a large scale investigation, overhaul, cleaning greatly. At the same time, respond to the

18、 concerns of the masses, safeguard the interests of the masses, pay attention to solve practical problems, solve the people around the unwholesome tendencies especially on eat, take the card, Yong lazy luxury, extravagance and waste fees, privileges and other issues, timely and effective, without an

19、y discount to solve, to improve the style of real implementation of the requirements of real to the grassroots, real let group Benefit the public.(a) focus on solving the four winds outstanding issuesThe central and provincial requirements, the county leadership and leading cadres of key performance

20、 concept is not correct, do not dare to play, to engage in image project, political project, a leadership guide, a set of ideas, orders and prohibitions, and a policy, there are countermeasures county. The units directly under the heavy focus on solving Yung lazy drag, buck passing skin, work is not

21、 implemented, the service is not active. The dynamic problem of law enforcement and supervision departments and window units, service industry mainly solve the door hard, ugly face, something difficult, and arbitrary charges, fines, levies, and breach of privilege, chinakayao, not the problem of law

22、. The township, street The collar of leading bodies and leading cadres to solve key does nottheir own conditions to develop the correct road, the maximum to avoid investment risk, gain profit.(three) vigorously promote the brand. To establish brand awareness, awareness of the use of brand, brand val

23、ue, brand acquisition performance, enhance the competitive strength. Concentrated manpower, careful planning, packaging and publicity of a number of unique, market influence and coverage of the brand, the implementation of key breakthroughs, to enhance the competitive strength, walking business road

24、 the competition of alienation and characteristics, the pursuit of stability and development of the market.(four) to promote the integration of resources. To further broaden their horizons, effective integration of resources within the group, the city resources, other industries and regional resourc

25、es, mutual trust, mutual benefit, seeking win-win principle, in the framework of national policies and regulations, strict inspection and argumentation, legal consultation, examination and approval procedures, strict regulation of economic activities, attract injection the social investment to the i

26、ndustry group, to achieve leveraging the development, ensure that the value of state-owned assets.(five) to strengthen the construction management personnel. Strengthen the management of education and training of cadres and workers of the existing business, firmly establish the concept of the market

27、, enhance the sense of crisis to adapt to market competition, the sense of urgency, improve the ability to respond to market competition, improve management and operation of the market. At the same time, according to the need of industrial development, vigorously the introduction of high-quality man

28、agement management personnel, and strive to build a high-quality professional management team, hard work, and promote the entire workforce knowledge structure, age structure, structure optimization and upgrading ability, enhance core competitiveness, adapt to the need of market competition.(six) ser

29、iously study the policy for policy. Serious research about social support the development of cultural undertakings in the country and the XX policy, especially the policy of industrial development, financial investment policy, financial policy and tax policy, and actively seek policy, projects and f

30、unds, enterprise and industry group mission to promote leapfrog development. 奉化、宁海收费所大棚修复工程施 工 技 术 方 案第一节 :修复工程施工工艺方案一|、灯具工艺流程:(A)灯具安装工艺流程:检查灯具 组装灯具 安装灯具 通电试运行。(B)开关、插座安装工艺流程: 检查开关、插座 安装开关、插座 通电试运行。1.1灯具固定应符合下列规定:灯具重量大于3kg时,固定在螺栓或预埋吊钩上。软线吊灯、灯具重量在0.5kg及以下时,采用软线自身吊装,大于0.5kg的灯具采用吊链,且软电线编叉在吊链内,使电线不受力。花灯

31、吊钩圆钢直径不应小于灯具挂销直径,且不应小于6 mm,大型花灯的固定及悬吊装置,应按灯具重量的2倍做过载试验。当钢管做灯杆时,钢管内径不应小于10 mm,钢管厚度不应小于1.5 mm。1.2灯具安装高度和使用电压等级应符合下列规定:一般敞开式灯具,灯头对地面距离不小于下列数值(采用安全电压时除外)。室外:2.5m(室外墙上安装),厂房:2.5m,室内:2m。1.3当灯具距地面高度小于2.4M时,灯具的可接近裸露导体,必须接地或接零可靠,并应有专用接地螺栓且有标识。1.4引向每灯具导线线芯最小截面积应符合下表:导线线芯最小截面积(mm2)灯具安装的场所及用途线芯最小截面积铜芯软线铜线铝线灯头线民

32、用建筑室内0.50.52.5工业建筑室内0.51.02.5室外1.01.02.51.5装有白炽灯泡的吸顶灯具、灯炮不应紧贴灯罩,当灯炮与绝缘台间距离小于5 mm时灯泡与绝缘台间应采取隔热措施。1.6应急照明灯具安装应符合下列规定: 1、应急照明灯的电源除正常电源外,另有一路电源供电;或者是独立于正常电源的柴油发电机组供电;或由蓄电池柜供电或选用自带电源型应急灯具;应急照明在正常电源断电后,电源转换时间为:疏散照明15s;备用照明15s(金融商店交易所1.5s);安装照明0.5s;疏散照明由安全出口标志灯和疏散标志灯组成。安全出口标志灯距地高度不低于2M,且安装在疏散出口和楼梯口里侧的上方;疏散

33、标志灯安装在安全出口的顶部,楼梯间、疏散走道及其转角处应安装在1 m以下的墙面上。不易安装的部位可安装在上部。疏散通道上的标志灯间距不大于20 m(人防工程不大于10 m);疏散标志灯的设置,不影响正常通行,且不在其周围设置容易混同疏散标志灯的其他标志牌等;应急照明灯具、运行中温度大于60的灯具,当靠近可燃物时,采取隔热、散热等防火措施。当采用白炽灯,卤钨灯等光源时,不直接安装在可燃装修材料或可燃物件上;应急照明线路在每个防火分区有独立的应急照明回路,穿越不同防火分区的线路有防火隔堵措施;疏散照明线路采用耐火电线、电缆,穿管明敷或在非燃烧体内穿刚性导管暗敷,暗敷保护层厚度不小于30 mm。电线

34、采用额定电压不低于750V的铜芯绝缘电线。1.7插座接线应符合下列规定:单相两孔插座,面对插座的右孔或上孔与相线连接,左孔或下孔与零线连接,单相三孔插座面对插座的右孔与相线连接,左孔与零线连接。单相三孔、三相四孔及三相五孔插座的接地或接零线接在上孔,插座的接地端子不与零线端子连接,同一场所的三相插座,接线的相序一致。接地或接零线在插座间不串联连接。潮湿场所采用密封型并带保护地线触头的保护型插座安装高度不低于1.5M。车间与试验室插座安装高度不小于0.3米。1.8照明开关安装应符合下列规定:同一建、构筑物的开关采用同一系列产品,开关的通断位置一致操作灵活,接触可靠。相线开关控制。开关距门框边缘的

35、距离0.150.2 m,高度1.3 m。二、卫生器具安装施工方案安装准备卫生洁具及配件检验卫生洁具安装卫生洁具配件安装卫生洁具与墙、地缝隙处理卫生洁具外观检查盛水、通水试验(1) 卫生器具的安装位置应正确,允许偏差:单独器具10毫米,成排器具5毫米;垂直度不超过3毫米。(2) 卫生器具安装高度应符合设计要求,设计无规定时,应按规范规定确定。允许偏差:单独器具10毫米;成排器具5毫米。(3) 卫生器具支、托架的安装须平整、牢固,与器具接触应紧密。(4) 连接卫生器具的排水管管径和最小坡度,如设计无要求时,应符合下表的规定:连接卫生器具的排水管管径和最小坡度 表3.2.3序号卫生器具排水管管径(m

36、m)管道最小坡度1污水盆(池)500.0252洗脸盆(洗手盆)32500.0253大便器(自闭式)1000.0124小便器(自动、手动)40500.020(5) 卫生器具给水配件的安装应符合规范规定。(6) 为保证卫生器具安装位置的精确度、待土建单位在卫生间内部初步粉刷后,再安装卫生器具下部的排水接管。第二节 :室内装修施工工艺方案一、室内贴面砖施工工艺标准施工工艺1工艺流程2操作工艺(1)基体为混凝土墙面时的操作方法 1)基层处理:将凸出墙面的混凝土剔平,对于基体混凝土表面很光滑的要凿毛,或用可掺界面剂胶的水泥细砂浆做小拉毛墙,也可刷界面剂。井浇水湿润基层。2) 10mm厚1:3水泥砂浆打底

37、,应分层分遍抹砂浆,随随刮平抹实,用木抹搓毛。3)待底层灰六七成干时,按图纸要求,釉面砖规格及结实际条件进行排砖。弹线。4)排砖:根据大样图及墙面尺寸进行横竖向排砖,以保面砖缝隙均匀,符合设计图纸要求,注意大墙面。柱子和垛子排整砖,以及在同一墙面上的横竖排列,均不得有小于1八砖非整砖。非整砖行应排在次要部位,如窗间墙或阴角处等。但注意一致和对称。如遇有突出的卡件,应用整砖套割吻合,不用非整砖随意拼凑镶贴。 5)用废釉面砖贴标准点,用做灰饼的混合砂浆贴在墙瓦用以控制贴釉面砖的表面平整度。6)垫底尺。计算准确最下一皮砖下口标高,底尺上皮一比地面低1m左右,以此为依据放好底尺,要水平。安稳。7)选砖

38、。浸泡:面砖镶贴前,应挑选颜色。规格一致的罚浸泡砖时,将面砖清扫干净,放人净水中浸泡2h以上,取出表面晾于或擦干净后方可使用。8)粘贴面砖:粘贴应自下而上进行。抹8mm厚1:01:2水泥石灰膏砂浆结合层,要刮平,随抹随自上而下粘贴面砖,求砂浆饱满,亏灰时,取下重贴,井随时用靠尺检查平整度,时保证缝隙宽度一致。9)贴完经自检无空鼓。不平。不直后,用棉丝擦干净,用缝胶。白水泥或拍干白水泥擦缝,用布将缝的素浆擦匀,砖面净。另外一种做法是,用1:1水泥砂浆加水重20的界面剂或专用瓷砖胶在砖背面抹34mm厚粘贴即可。但此种做法其层灰必须抹得平整,而且砂子必须用窗纱筛后使用。另外也可用胶粉来粘贴面砖,其厚

39、度为23mm,有此种法其基层灰必须更平整。(2)基体为砖墙面时的操作方法:1)基层处理:抹灰前,墙面必须清扫干净,浇水湿润。2) 12mm厚1:3水泥砂浆打底,打底要分层涂抹,每层厚度宜57mm,随即抹平搓毛。二、 涂饰工程本修复工程表面施涂油漆施工工艺标准施工工艺1、工艺流程(1)处理基层:用刮刀或碎玻璃片将表面的灰尘、胶迹、锈斑刮干净,注意不要刮出毛刺。(2)磨砂纸:将基层打磨光滑,顺木纹打磨,先磨线后磨四口平面。(3)润油粉:用棉丝蘸油粉在木材表面反复擦涂,将油粉擦进棕眼,然后用麻布或木丝擦净,线角上的余粉用竹片剔除。待油粉干透后,用1号砂纸顺木纹轻打磨,打到光滑为止。保护棱角。(4)满

40、批油腻子:颜色要浅于样板12成,腻子油性大小适宜。用开刀将腻子刮人钉孔。裂纹等内,刮腻子时要横抹竖起,腻子要刮光,不留散腻子。待腻子干透后,用1号砂纸轻轻顺纹打磨,磨至光滑,潮布擦粉尘。(5)刷油色:涂刷动作要快,顺木纹涂刷,收刷。理油时都要轻快,不可留下接头刷痕,每个刷面要一次刷好,不可留有接头,涂刷后要求颜色一致。不盖木纹,涂刷程序同刷铅油相同。(6)刷第一道清漆:刷法与刷油色相同,但应略加些汽油以便消光和快干,并应使用已磨出口的旧刷子。待漆干透后,用1号旧砂纸彻底打磨一遍,将头遍漆面先基本打磨掉,再用潮布擦干净。(7)复补腻子:使用牛角腻板。带色腻子要收刮干净。平滑。元腻子疤痕,不可损伤

41、漆膜。(8)修色:将表面的黑斑、节疤、腻子疤及材色不一致处拼成一色,并绘出木纹。(9)磨砂纸:使用细砂纸轻轻往返打磨,再用潮布擦净粉未。(10)刷第二、三道清漆:周围环境要整洁,操作同刷第一道清漆,但动作要敏捷,多刷多理,涂刷饱满、不流不坠、光亮均匀。涂刷后一道油漆前应打磨消光。(11)冬期施工:室内油漆工程,应在采暖条件下进行,室温保持均衡,温度不宜低于十10,相对湿度不宜低于60。第三节:地面工程一、砖面层施工工艺标准施工工艺1工艺流程基层处理找标高、弹线抹找平层砂浆弹铺砖控制线铺砖 、勾缝、擦缝养护 踢脚板安装 2操作工艺(1)基层处理:把沾在基层上的浮浆、落地灰等用堑子或钢丝刷清理掉,

42、再用扫帚将浮土清扫干净。(2)找标高:根据水平标准线和设计厚度,在四周墙、柱上弹出面层的上平标高控制线。(3)排砖:将房间依照砖的尺寸留缝大小,排出砖的放置位置,并在基层地面弹出十字控制线和分格线。排砖应符合设计要求,当设计无要求时,宜避免出现板块小于1/4边长的边角料。(4)铺设结合层砂浆:铺设前应将基底湿润,并在基底上刷一道素水泥浆或界面结合剂,随刷随铺设搅拌均匀的干硬性水泥砂浆。(5)铺砖:将砖放置在干拌料上,用橡皮锤找平,之后将砖拿起,在干拌料上浇适量素水泥浆,同时在砖背面涂厚度约1mm的素水泥膏,再将砖放置在找过平的干拌料上,用橡皮锤按标高控制线和方正控制线坐平坐正。(6)铺砖时应先

43、在房间中间按照十字线铺设十字控制砖,之后按照十字控制砖向四周铺设,并随时用2m靠尺和水平尺检查平整度。大面积铺贴时应分段。分部位铺贴。(7)如设计有图案要求时,应按照设计图案弹出准确分格线,并做好标记,防止差错。(8)养护:当砖面层铺贴完24h内应开始浇水养护,养护时间不得小于7d。(9)勾缝:当砖面层的强度达到可上人的时候,进行勾缝,用同种、同强度等级、同色的水泥膏或1:1水泥砂浆,要求缝清晰、顺直、平整、光滑、深浅一致,缝应低于砖面051mm第四节:防水工程屋面防水工程施工方法及技术措施1. 工艺流程:基层处理涂刷基层处理剂涂布2厚聚氨脂防水涂料附加层法施工三元乙丙卷材与基层涂专用胶晾胶卷

44、材铺贴收头粘接卷材接头密封蓄水试验防水层验收做保护层。2. 基层处理找坡施工前,应先事先清理屋面上垃圾,预埋落水口、出水口,完成伸出屋面的所有管道,管边根部用细石砼分两次灌密实,以保证不发生漏水。3. 聚氨脂防水涂料:(1)基层应干燥,含水率以少于9%为宜。(2)涂膜施工工艺施工顺序:基层处理落水口管根增强处涂刷底层涂料涂布第一道涂膜防水层。(3)涂布顺序应先垂直面后水平面,先阴阳角及管根,细部后大面,每层涂布方向应顺直。4. 三元乙丙防水卷材施工方法及技术要点、卷材在大面积铺贴前,排气槽屋面拐角、天沟、落水口、屋脊等易渗漏薄弱环节应加铺一道附加层。防水卷材铺贴方向,卷材应平行于屋脊方向从檐口

45、处往上铺贴,双向流水坡度卷材搭接应顺流水方向。、卷材从流水坡度的下坡开始,接卷材规格弹出基准线铺贴。并使卷材的长向与流水坡向垂直,注意卷材的配置应减少阴阳角处的接头。、铺贴平面与立面相连接的卷材,应由下向上进行,使卷材紧贴阴阳角,铺展时对卷材不可拉的过紧。且不得有皱折、空鼓等现象。、阴角处上翻250,卷材收头采用金属压条钉压,最大钉距不应小于900,然后用密封材料将接缝和压条顶缝嵌填密实。、管道四周防水层收头处,应采用金属箍筋箍紧。并用密封材料嵌填密实。5、排气、压实:、排气:每当铺完一卷卷材后,应立即用干净松软的长把滚刷从卷材的一端开始,朝卷材的横向顺序用力滚压一遍,以排除卷材间粘接层间空气

46、.、压实:排除空气后,平面部位可用外包橡胶的长300重30的铁辊辊压,使卷材与基层粘接牢固,垂直部位用手持压辊辊压。、卷材末端收头及封边嵌固:为了防止卷材末端剥落,造成渗水、卷材末端收头也可采用聚氨脂嵌缝膏或其它密封材料封闭,当密封材料固化后,表面再涂刷一层聚氨脂防水涂料,然后压水泥砂浆压缝封闭。6、卷材的接头粘贴:高分子卷材(三元乙丙)搭接缝用丁基胶粘剂A、B两个组份,按1:1的比例配合搅拌均匀,用油漆刷均匀涂刷在翻开的卷材接头的两个粘接面上,静置干燥20min,即可从一端开始粘合,操作时用手从里向外一边压合,一边排除空气、并用手持小铁压辊压实边缘用聚氨脂嵌缝膏密闭。7、防水层蓄水试验:屋面三元乙丙防水层施工完毕后,经隐蔽工程验收,甲方、监理确认做法符合设计要求,符合施工规范。下来再做24小时蓄水试验,经检查确认不渗漏水,方可进行下道工序防水保护层的施工。8、成品保护:、屋面防水层工程完

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 其他


经营许可证编号:宁ICP备18001539号-1