《【BS英国标准】BS EN 936-2006 Chemicals used for treatment of water intended for human consumption — Carbon dioxide.doc》由会员分享，可在线阅读，更多相关《【BS英国标准】BS EN 936-2006 Chemicals used for treatment of water intended for human consumption — Carbon dioxide.doc（19页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARDBS EN 936:2006Licensed Copy: x x, The University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BSIChemicals used fortreatment of water intended for human consumption Carbon dioxideICS 13.060.20; 71.100.80NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWB
2、S EN 936:2006National forewordThis British Standard is the UK implementation of 936:2006. It supersedes BS EN 936:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee CII/59, Chemicals for drinking water treatment.A list of organizations represented on
3、this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Licensed Copy: x x, T
4、he University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October2008 BSI 2008ISBN 978 0 580 55268 7Amendments/corrigenda issued since publicationDate CommentsBS EN 936:2006EURO
5、PEAN STANDARD NORME EUROPENNEEUROPISCHE NORMEN 936August 2006ICS 71.100.80Supersedes EN 936:1997English VersionChemicals used for treatment of water intended for human consumption - Carbon dioxideProduits chimiques utiliss pour le traitement de leau destine la consommation humaine - Dioxyde de carbo
6、neProdukte zur Aufbereitung von Wasser fr den menschlichen Gebrauch - KohlenstoffdioxidThis European Standard was approved by CEN on 26 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a
7、 national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version i
8、n any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Fi
9、nland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN DE NOR M A L I S A TI
10、ON EUR O P I S C H ES KOM I TEE F R NOR M UNG Management Centre: rue de Stassart, 36 B-1050 BrusselsLicensed Copy: x x, The University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BSI 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Member
11、s.Ref. No. EN 936:2006: ELicensed Copy: x x, The University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BSIContentsPageForeword.3Introduction .41Scope .52Description .52.1Identification.52.2Commercial form .52.3Physical properties.62.4Chemical properties .63Purity criteria.73.1General.73.
12、2Composition of commercial product .73.3Impurities and main by-products .73.4Chemicals parameters .74Test methods.74.1Sampling .74.2Analysis .75Labelling - Transportation - Storage.85.1Means of delivery.85.2Risk and safety labelling according to the EU Directives .85.3Transportation regulations and
13、labelling .85.4Marking .95.5Storage.9Annex A (informative) General information on carbon dioxide.10A.1Origin .10A.2Use .12A.3General rules relating to safety .12Bibliography .1413BS EN 936:2006EN 936:2006 (E)Licensed Copy: x x, The University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BS
14、IForewordThis document (EN 936:2006) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by F
15、ebruary 2007, and conflicting national standards shall be withdrawn at the latest by February 2007.This European Standard supersedes EN 936:1997.Significant technical differences between this edition and EN 936:1997 are as follows:a) deletion of the reference to EU Directive 80/778/EEC of July,15 19
16、80 in order to take into account of the last Directive in force (see 1);b)updating of the transportation regulations and labelling.c)the requirement for carbon dioxide content is now only 99% instead of 99.7% in the latest editionAccording to the CEN/CENELEC Internal Regulations, the national standa
17、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Rom
18、ania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Licensed Copy: x x, The University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BSIIntroductionIn respect to the potential adverse effects on the quality of water intended for human consumption caused by the product co
19、vered by this European Standard:a)this European Standard provides no information as to whether the product may be used without restriction in any of the Member States of the EU or EFTA;d)it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulatio
20、ns concerning the use and/or the characteristics of this product remain in force.NOTEConformity with this European Standard does not confer or imply acceptance or approval of the product in any of the Member States of the EU or EFTA. The use of the product covered by this European Standard is subjec
21、t to regulation or control by National Authorities.Licensed Copy: x x, The University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BSI1ScopeThis European Standard is applicable to carbon dioxide used for treatment of water intended for human consumption. It describes the characteristics of
22、 carbon dioxide and specifies the requirements and corresponding analytical methods for carbon dioxide. It also gives information on its use in water treatment.2Description2.1Identification2.1.1Chemical nameCarbon dioxide.2.1.2Synonym or common nameCarbonic acid gas (carbonic anhydride).2.1.3Relativ
23、e molecular mass44,011.2.1.4Empirical formulaCO2.2.1.5Chemical formulaCO2.2.1.6CAS Registry Number 1)124-38-9.2.1.7EINECS reference2)204-696-9.2.2Commercial formThe carbon dioxide is supplied as a liquefied gas.NOTEThe solid form is not usually used for the treatment of water intended for human cons
24、umption.1) Chemical Abstracts Service Registry Number.2) European Inventory of Existing Commercial Chemical Substances.Licensed Copy: x x, The University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BSI2.3Physical properties2.3.1AppearanceThe carbon dioxide is a colourless gas or liquid.2.
25、3.2DensityThe density of the gas at 0 C and 101,3 kPa 3) is 1,9 768 kg/m3, while the density of the liquid at 0 C and4 000 kPa is 933,318 kg/m3.2.3.3Solubility in waterThe solubility of the gas in water is 1,72 g/l at 20 C and 101,3 kPa.2.3.4Vapour pressureThe vapour pressure of the liquid is 5 733,
26、0 kPa at 20 C.2.3.5Boiling point at 100 kPa3)(See 2.3.6).2.3.6Melting pointThe sublimation point of solid CO2 is -78,9 C (and 101,3 kPa).2.3.7Specific heatThe specific heat of carbon dioxide is 0,827 kJ/kg x K at 0 C and 100 kPa.2.3.8Viscosity (dynamic)The viscosity of the liquid is 147 x 10-7 Pa x
27、s at 20 C.2.3.9Critical temperatureThe critical temperature of the liquid is 31 C.2.3.10 Critical pressureThe critical pressure of the carbon dioxide is 7 883 kPa.2.3.11 Physical hardnessNot applicable.2.4Chemical propertiesThe carbon dioxide CO2 forms a weak acid when dissolved in water. It reacts
28、with alkalis to form carbonates and bicarbonates.3) 100 kPa = 1 bar.Licensed Copy: x x, The University of Sheffield, 03/07/2009 16:44, Uncontrolled Copy, (c) BSI3Purity criteria3.1GeneralThis European Standard specifies the minimum purity requirements for carbon dioxide used for the treatment of wat
29、er intended for human consumption. Limits are given for impurities commonly present in the product. Depending on the raw material and the manufacturing process other impurities may be present and if so, the user and when necessary to relevant authorities, shall be notified.NOTEUsers of this product
30、should check the national regulations in order to clarify whether it is of appropriate purity for treatment of water intended for human consumption, taking into account raw water quality, required dosage, contents of other impurities and additives used in the product not stated in the product standa
31、rd.Limits have been given for impurities and chemical parameters where these are likely to be present in significant quantities from the current production process and raw materials. If the production process or raw materials lead to significant quantities of impurities, by-products or additives bei
32、ng present, this shall be notified to the user.3.2Composition of commercial productThe product shall contain at least a volume fraction of 99 % of CO2 in bulk and in cylinder.NOTEThe composition of the commercial product is defined in the EU Directive 96/77/EC of December 2, 1996 (see3).3.3Impuritie
33、s and main by-productsThe residual gas content consists mostly of nitrogen, oxygen and moisture.3.4Chemicals parametersNOTEThe chemical parameters and indicator parameters according to EU Directive 98/83/EC (see 1) are not found in the gaseous phase. Pesticides and polycyclic aromatic hydrocarbons a
34、re not by-products of the manufacturing process.4Test methods4.1SamplingObserve the recommendations of ISBT “Carbon Dioxide Quality Guidelines and Analytical ProcedureBibliography March 2001” (see 4).4.2Analysis4.2.1Carbon dioxideMeasure of a fixed volume of product (V1). Absorption in potassium hydroxide solut